CAD

Hey guys,I'n new to PTC . Trying to get away with solving equations. I'm having some issues heres, if someone could help that would be very appreciated . I want to solve the following equation : Y=x(R2/(R1+R2)Where : Y=0.8,X=12,R1=10R2=UnknownSo I type the following on mathcad : R1:= 10 X:=12Y:=0.8Y=x(R2/(R1+R2) => Solve,R2Unfortunately it keeps saying that R2 is undefined . Does someone know what's going on here ?Thanks a lot guys.  

Hi Can you please help converting these xmcd files to mcdx in Mathcad prime 6.0?Thanks

How do I assign a weight to a shrink wrapped part with no weight?

I was reviewing a drawing for release and noticed that the engineer had put appended text to a dimension, "TEXT HIGHT" on the drawing face. The word 'HIGHT" is not in either 'dictionary' file, but ModelCheck did not flag it as a misspelled word. Is there a setting for ModelCheck to check appended text to dimensions? If not, I will open an idea to have ModelCheck check appended dimension text.  

Is Creo Sketch still a PTC product?Is anyone using this tool in thier organization? I ran across a data sheet on it and it looks to have a bunch of the markup sketching functionality that we are interested in for MacOS and iPad based reviewers in our organization. https://www.ptc.com/-/media/Files/PDFs/CAD/creo-datsheet/sketch.pdf   

I haven't used Mathcad before, and I was trying to get the 30 days trial. But this prompt shows whenever I try to acquire a license "You have reached the maximum number of license requests available for your product type". What should I do?

Hello,How can I get rid of that error in red below? I want to plot the Bode graphs of amplitude-frequency and phase-frequency in Mathcad Prime 7. Also, I want to have grid on in these graphs. How can I do that in Mathcad Prime 7?       Mathcad Prime 7 file is attached.Thank you.

Hello,I have few questions in the attached MathCAD 15 sheet:1. I had to Victoria's the equation to make it work but i did not do to others. I'd like to know why.2. I expect to see three values in the results for each variable, but not able to. My initial input is three lengths Lx, Ly and Lz and I need to get the strength results for  three different lengths. Then arrange then as such  so for each length, the corresponding strength. Thanks,Sam

Hi!   I want to embed a MathCad file in to word. This is possible to do in Word, however it seems that it is only possible to embedd MathCad 15, and not MathCad Prime.   Has anyone been able to embedd MathCad Prime versions into word, e.g. MathCad Prime v.8.0?

I'm having an issue where the diameter symbol is staying bold even after changing the font to legacy. Even if the dimension is created after the font change, it still is bold. The picture below shows the ASME (left) vs LEGACY (right) fonts. I can work around this by manually copying and pasting the diameter symbol from the GTOL frame to the dimension text, but this is slow and a pain on large drawings. Is anyone else experiencing this? Is there a way to report this bug to PTC for fixing    

Hello everyone,We will move from Site license server to a global license version. In your opinion, what would be the best approach? To situate, the sites are spread all over the world from Europe, Americas and Asia and each site has its own server and with the move to global licenses it no longer makes so much sense to use server per site. thanks in advanceRui Ferreira 

es para una cuenta de estudiante   it is for a student account   Translated by Iuliana Lazar with Google Translate on 11. Nov. 2022

My Dell Precision workstation has a Quadro RTX5000  I spoke to an Industrial designer friend at Dell before purchasing this laptop and he said never skimp on a video card.    384 resolution on a laptop.   So I was thinking and after using it for the past few years of a few enhancements that might be noted for future releases of Creo.   I thought I would bounce this one by the folks on the forum.  So many probably don't know that if you draw a line in sketcher that you can change the linetype *ptc calls incorrectly a font .... or change color.  I want to also change the line thickness and have a few selections or even be able to increment thickness of lines.  Maybe a developer would consider an option to have the line weight pull thru surfaces or solids as if the surface or solid had a slider for opacity.   Once Creo 9.0 question:  What config.pro setting turns off the menu *always on* in creo 9.0 Bart Brejc

Can Prime be installed and work on a Windows PC that has no access and never will have access to the internet?Thanks

Hi!I've been having trouble with my mathcad license since I got it from you.Is not possible to activate the program correctly, I had this trial version.I'm considering buying the student license for a month because I need it for an univ assignment.But because of the license trouble with activating the product I'm feeling doubtful.Can you help me in some way?I've been trying to fix an account with both my school mail and private mail.school mail is esteman@kth.se, private is this one.Program only says "maximum license..."Been trying to uninstall etc, same message gets there anyway.//Johan

I receive an error that says "There was no endpoint listing at https://apps.ptc.com/accountServices/PtcAccountService that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details." I have already tried resetting my password and that has not resolved the issue.

I am using Creo Parametric Release 4.0 and DatecodeM040How to set the default slant angle for the text in drawing

I've used Creo Schematics / RSD for a long time.   My understanding is this tool was developed from Medusa which is why there are .she files.  Medusa 😉   Once I asked you Jim why we cant' Cut and Paste in RSD and you mentioned we can.   So  not wanting to push further I realize maybe I'm wrong.  What I meant to state is something more specific.  So I'm editing a symbol in Schematics.  I want to cannibalize a part of one symbol and use it in another symbol.  CONT C will work in the symbol *BLOCKS I'm on but when I exit out and reach to edit another symbol CONT V or paste is not held apparently in cut paste memory.   And I meant to suggest this 15+ years ago.  Lets call it a symbol not a 'blocks'.  The word 'blocks' is to close to the word block which is part of a block diagram.   I might have wasted 20 hrs in Schematics before even noticing the S on the end 😉  Also we sho

I would like to design a compliant hinge joint in the same vane as the one presented in this video: https://www.youtube.com/watch?v=uvPSsUkLypY&ab_channel=TheFACTsofMechanicalDesignHow would I go about doing so? So far as I can understand, I believe the solution lies somewhere in adding flexibility to the design, but I'm not entirely sure. I want to be able to model the rolling motion as well as the compliance of the connecting linkage if at all possible. Below I've shared what I've developed so far. 

Dear Creo Team,  My Name is Santosh vishwakarma, I am the user of the Creo from last 15 years.  I would like to suggest for the improvement of the Drafting module.1. I suggest if the drafting Text and dimension can be auto set as per the scale factor of the Page size, for example : if user has selcted A4 sheet then the Text and arrow size should be auto set to the desire visible criteria of drawing factor , it should Not be tiny or large visible, Actually it needs all the time setting the text size and arrow size as well as extension line and gaps etc. 2. Also the hidden line issue have been seen in case of projection, User has to select and correct for each time. It should show automatic projection lines of the hidden as well. 3. Also the there is one facilitation is required for Drawing no generation in order to continuation if multtiple drawings of child parts are created for the particular Assembly. So that the drawing number can be in order to de

I'm using a remote desktop connection for the following user appears for me The error "(-103) Cannot checkout an uncounted license within a windows terminal services guest session" or "Terminal Server Remote Client Not Allowed" is received while launching application like Creo . There would be a way to solve this problem the license and Creo Design Essentials - Locked

See this image:  The distance between 45° and the curved line is huge compared to the distance between 24.5 and its straight line, making it look a bit weird and inconsistent. I have searched in the config.pro but there doesn't seem to be any setting for this. Any ideas?

I am using Creo Parametric Release 4.0 and DatecodeM030Buongiorno, in un modello trovo una feature che non riesco ad editare, volevo sapere come procedere, la ringrazio.   Hello, in a model I find a feature that I cannot edit, I wanted to know how to proceed, thank you.   Translated by Iuliana Lazar with Google Translate on 10 nov. 2022

Hi, I noticed in the attached sheet that I couldn't integrate a function containing vector input. The same issue came up in my solve blocks trying to find a solution for an equation with vector input. I made a work around by splitting up the vector input in individual elements. Does anyone know a solution that doesn't involve splitting up the vector input? I have highlighted my questions in the attached sheet. Thank you!

We need for assistance to export images files from Creo Illustrate Figure to any image extension (PNG, BMP, JPG) with transparent background.