CAD

Hello,I am trying to upgrade from the Mathcad Express Version via the upgrade Button in Mathcad.The issue I am having is the following:when I press the button I get an offer for 63€ while my university colleagues get a 10€ offer.Is it possible to get the 1-year-term license for 10€?Thank you.

I am using Creo Parametric Release 4.0 and DatecodeM110Having issue to find several number of roundoff values in drawing annotation for huge size drawing sheets.

I am using Mathcad, and I'm not able to start the license serverHere are the errors that I faced2:29:47 (ptc_d) MATHCAD2:29:47 (ptc_d) Wrong hostid on SERVER line for license file:2:29:47 (ptc_d) /tools/misc/mathcad/license/mathcad.lic.dat.new2:29:47 (ptc_d) SERVER line says PTC_HOSTID=00-0C-29-F4-1C-00, hostid is PTC_HOSTID=06-00-00-00-00-002:29:47 (ptc_d) Invalid hostid on SERVER linewhile the hostid (mac address) is the same as I've in the license file, the PTC daemons don't recognize it

(Using Creo 7.0.5) What would be the easiest and most clever way to annotate Burr & Break Edge Tolerance in a drawing? I have these 20+ year old drawings that currently is being re-drawn from newly made 3D-models. In the  old ones it's been annotated like this: A more common (modern?) way seems to be using a "corner" symbol followed by the tolerance. The symbol is quite similar to the straight angle symbol found in Unicode: ∟The technical fonts in Creo (font, isofont, iso30985font etc) doesn't include this symbol, so it can't be included in the annotation. My current solution is adding a separate textframe containing only this symbol, putting it in front of the tolerance:  It "works", but I hope there is a better way?

I want to analyze a bolt with preload to find the equivalent plastic strain. but when I given the preload and then trying to give the nonlinear analysis system saying as below image.How to do the nonlinear bolt analysis with preload?

Hi experts, I am trying to use Mathcad to solve the equation based on Equations 4 and equation 6.below equations are from this paper.https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9913417  when I try to use that to solve the equation. Mathcad can't find the answer in equation 6. but it is OK to get the answer by using eqaution4.I know equations 4 and 6 are different, but I don't understand why I can find it. but this paper can.so I would like to know if my operation is wrong. ps: the version of Mathcad is Mathcad 15  

Hello,I created an new Format file (.frm) and added there some parameters-links (via Note and &XXXX) with I want to automatically updated from the Main model parameters.But when I load this Format to my drawing of the model the parameters do not update.Anyone can give me a hint how to update the parameter-links in the format file according the 3D model parameters?

I am using Creo Parametric Release 7.0 and Datecode7.0.3.0Good Morning dear,I'm tryng to use de UDF tool, in assemble mode, to customize a project and the follow message shows:"You have not checked out the license option. Please click "File->Options->Licensing" and choose required option from "Refresh license list".In the part mode I can acess the tool.I'm using a locked license.Here are the errors that I faced"You have not checked out the license option. Please click "File->Options->Licensing" and choose required option from "Refresh license list".

Hello, What is the Creo license model in the case of cloud deployment? We would like to test deploying Creo on Azure VD to be streamed through the browser. Is there a way to configure Azure VD Creo application in order to use the license servers we already have? Currently they are used by users with local copy of Creo. Can location specific licenses be used, do we need to use global ones or is there another type of license required?

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Here is a problem about creo large assembly efficiency:I use weblink to assemble the model automatically. However, while the assembly part amount is more than 500, it will be very slow.The installation of single part will be slower and slower as the assembly get larger.eg:first 100 parts : 1minsecond 100 parts : 1min 40 sec...final 100 parts : 5 minIs there any way to avoid this?

Hello, So I went to install the license server for Creo 7 on my license server and it does not want to use the NIC mac address that the current license server is using on the same machine.  Has anyone else seen this and know why it is doing this or how to get around it?  When I do ipconfig /all, it shows 4 NICs and the one it is picking is the last one in the list. **Update*** I have two NICs that are teamed.  The current license uses the teamed NIC MAC.  I have disabled the 4th NIC which is something Dell has for the SAN but we have found unnecessary.  But now the new license server wants one of the NICs and not the teamed NIC.  Any ideas? Thank you, Brian

Hello, We are setting up repeat region BOM tables. Our standard is not to put a "1" on a balloon if the qty is only 1 each. Is there a way not do display a quantity of 1 and still keep the tie to the table?  

I created numerous tapped hole patterns and added GD & T call out with no problem. On this hole pattern I cannot add the GD & T call out,. It is asking for a dimension reference. I have tried picking the dimension, but will not work. e other patterns did not require me to pick a dimension? What am i doing wrong

I am using Creo Parametric Release 8.0 and Datecode8.0.4.0we have Creo 8.0.4 in a network installationin the new workstation Creo live simulation doesn't work good and take more than 15 minutes to start an analysis in Creo simulate (a simple analisys with a cube with one side fixed and one force on the opposite side)the GPU seems to doesn't work and the and all analysis are made by CPUthe graphics card is a NVIDIA A4500 (ampere architecture) with 20 GB RAM, the cpu is a XEON W2223 with 64 GB RAM.in the driver i have activated all option about CUDA to enable it on all application, the Nvidia driver version is 472.98the same network Creo installation, in an old workstation with an QUADRO RTX 5000 and driver 462.31 works good, so i think that is not a problem about Creo configuration, otherwise i coulnd't work in any case.i've verified the driver option in the workstation where Live simulation works and i have the same option activated on new workstation.in my config files i activated the

Hi, I'm a new user, and I have a little day left on my trial software, before I decided on Purchasing this Match Cad Software. I try to use in finding the "d" on Punching Shear for a spread footing using WSD, it happens it turn into red, at it says unit problem. Does anybody can help on me to this issue.? Thanks

I need a product, and I am also not able to open an .XMCD file.

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Unit of measure to be shown as parameter in the drawingHere are the errors that I facedUnit of measure to be shown as parameter in the drawing

Hi, I am a new user in this software, does anyone can help me on how to manipulate the syntax on Solve Block? please see attached file for reference. 

How to I maximize result for the equation 

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0We are getting the transaction log for the wtuser database filled up error.This morning I tried to shrink the log file, and it helped for 5 minutes. Then I truncated the logs and it helped for a short period of time again. But it gets filled up pretty quickly and users can't use the app anymore.A user's report:I open PTC Creo, then click "Workspace" on the left. Then type in the search bar next to the "Quick Links" drop down menu. I search for "model*" to try and access our assembly. It then says:An unexpected error has occurred while performing search. Please contact system administrator.And that's when I click OK I get Windchill error.Exception: wt.util.WTRuntimeException: A persistence error occurred. Nested exception is: A persistence error occurredHere are the errors that I facedMSSQLServer Event 9002: The transaction log for database 'wtuser11' is full due to 'LOG_BACKUP'.

I have a drawing with a lot of parts and want to make parametric notes but want an easy way to find all the ID numbers attached to show the parametric value of each individual part. For example: &PTC_MATERIAL_NAME:300 would be one material of a part and &PTC_MATERIAL_NAME:301 would be another. Is there an easy way to find all those identifier numbers at once?  

Is there any method for creating multiple planar sections when viewing .pvz files? Are there any plans to create other, non-planar types of sections?

When editing or creating an assembly it is annoying that when you edit the definition you have to have it below everything that you may want to constrain it with. Is there a way to disable it or when you select edit definition it automatically moves it to the end of the tree. No

Hello, I am currently trying to update an old Toolkit script from Creo 5 to 9, and a couple functions,(ProGtoldataFreeStateGet, ProGtoldataDiameterGet etc.) were updated to ProGtolValueStringGet. I was looking at this article Article - CS280972 - How to use ProGtolSymbolStringGet and ProGtolValueStringSet to replace deprecated Creo Toolkit API 4.0 and onward (ptc.com) for assistance, but I was unable to discern what the actual output of ProGtolValueStringGet would be. I tried printing it out to the console to figure it out, but I also could not figure out how to get the otk_install.exe from the otk_install.sln that I am running the scripts on, to print it out. Any and all help would be greatly appreciated, Thank you,Mark Hardebeck

Hello , I'm having an error when I'm going to save files to PDF by Schematics I'm using version 4.0 is there any solution for this?