CAD

I wanted to know if it's possible to get the dll handle of another application from a toolkit application if both the applications are registered using registry file Prodev.dat.   Scenario: Suppose I am loading two add-in/plug-in DLLs at a time through prodev.dat file.Internally, i want to get the handle of each DLL, to communicate internally.Is there a way, i can get the DLL handle of each plug-in.Steps tried: Suppose, I am loading A.dll and B.dll through prodev.dat.When both gets loaded, I called toolkit API ProToolkitDllLoad() and passed B.dll path to get the B's handle.But, the API fails.If I try to call, ProToolkitDllHandleGet() , I don't have the first argument i.e. ProName application_idQuery from PTC team: Is there a way, i can get the Handle of B's DLL?

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0装配图工程图明细表中的挠性零件对应的行单元格手工填写文本并重生成后，内容消失并会跑到下一行的挠性零件行单元格上Here are the errors that I faced装配图工程图明细表中的挠性零件对应的行单元格手工填写文本并重生成后，内容消失并会跑到下一行的挠性零件行单元格上

I'm trying to install Mathcad 14 on a new, Windows 11 computer. I know that it is a really old version, but it works extremely well for me and I don't have funding to upgrade. That said, when I run the license set up (after installing Mathcad 14), I get an error message: The remote server returned an error: (403) ForbiddenAny help at all would be much appreciated. I'm sort of lost without Mathcad (I use it daily).Thank you.

In the Creo Part File, I have a Part as a body, <A> In that I have created 2 appearances (1. Black[Which is default], 2. Green[New one])<B> In Combined State, has 1. Default All (referencing Black Appearance), 2. Paint (Referencing Green Appearance)<C> I can switch between them in the part, and it does what I need it for In the Creo .DWG File, I reference the same Part as above, <A> Sheet 1 references some views that have the Combined state Default with Black Appearance <B> Now I have a new sheet(Sheet 2) that has some views for the (At least that is the intent) Combined State of the Paint with Gren Appearance<C> Keep a note that all the Vies are shading with Edges But the Problem is that I never show black and green on sheets 1 and 2, respectively; it always goes to the default appearance that the part has, so if I change the part's appearance/ combined state, that drawing force changes for all sheets Do you have a

Im just trying to renew the license

Does anybody know the correct code for reading out matrix content with JScript in MathCAD when loading it through the API?  This is the MathCAD simplified example in MathCAD Prime 11.  This is the code in the button: Reading a matrix value like this works excellent when loading the Matrix as a normal input variable without API. Other API functions works fine, like for instance Worksheet.Output.GetValue("EampleNumber").RealResult      

Hello CREO Users,I am working on a milling operation for an internal profile (similar to a valve seat geometry) in Creo Manufacturing. My objective is to machine the internal contour using tool radius compensation (CUTCOM) and to ensure smooth ramp transitions between Z-level passes or using helical folling the profile to avoid marks on the final surface.I have tried the following approaches:The Cut Line strategy allows helical movements and smooth transitions between passes, but it does not support tool radius compensation (CUTCOM). This is a requirement for my process.The Profile Milling strategy does support CUTCOM, but it does not offer ramp or spiral entry between Z-level cuts. As a result, the tool plunges vertically at each level, which causes unwanted marks and steps in the internal diameter of the part.I've tried to explore all the SCAN_TYPE parameters. LEAD_IN and LEAD_OUT approach but nothing works well.I need a solution that allows:Internal profile millingTool radius compen

Good morningI'm reaching out because my client recently bought a new computer and needs to transfer his current lifetime license to the new laptop.however the license management page no longer available since the company who used to administrate license in South Korea is no longer in business.Is there a way that I can access the license management page??

I created an assembly representing a commercial ball joint, called SKF_GE-4-C. This assembly is composed by a housing mounted by default and a sphere mounted with a "ball" connection type. If I drag components, everything is working fine at this level.Then I used this file as a component for another assembly called SUB, mounted as rigid. If I drag components, everything is working as expected at this level as well.However, when I insert SUB in another assembly called MAIN and try to constrain the hole of the ball with a fixed shaft, everything locks in place. I am not able to move the beam with drag components as I intend to do.Is it possible to get it to move preserving the same (or a similar) structure of assembly? What do you suggest? Using Creo 9.0.9.0. Files in attachment for reference.

I have the excel in that some type are there for e.g. frame size and its W,A etc. is there, I am trying to create this in Mathcad when I type the frame name it will automatically shows the all parameters related to that how this is possible in Mathcad for this I am using lookup function if anyone done this in past or have any suggestion how to achieve this pls comment on this I also attached the sheet and excel file.

Hi Everyone, I have added one column in the model tree that I need to get into the Parameter. Is it possible?   Regards, Aj

Hello, I am adjusting the size of the dimension arrows in the detail options to make them smaller since we have many drawings where they are packed full of dimensions. I found the options to adjust the arrowhead height and length, but I can't find one to shorten the length of the tail. (see attached picture). Any help would be greatly appreciated.  

I have a case involving a beam structure suspended on ropes.After analysis, I expect to see how the structure is balanced (center of gravity neutral) and deformed.But I don't know how to define the rope correctly.Could someone please help me? Thank you in advance!

I am using Creo Parametric - Release 5.0 (connected) Release 5.0 and Datecode5.0.6.0API ProDimensionCreate is not supported(unable to create dimension) for attachment of type PRO_SILH_EDGE in toolkit API, Also How to select PRO_SILH_EDGE in creo Ui using ProSelect API?? As there is no string available to select PRO_SILH_EDGE.

I have a mathcad 14 file made by someone else and I am having difficulty to get it to calculate properly I select 'Calculate now', 'Calculate Spreadsheet' and 'Automatic Calculation' and none of them actually seem to calculate. For a colleague it seems to work and we were unable to find the reason. for example, my colleague gets a plot here perfectly and I get this:  what could be causing this? the file is attached 

We have created this technical tip to help Mathcad users Install software on own. This is a one stop shop for Mathcad software users to get information ranging from  - Software Download, Installation, Licensing, Error's Troubleshooting to General queries related about the product.  This is just a start - We'll keep enhancing this page, as we tend to capture issues or when someone shares his/her findings.  Mathcad Download How and from where to Download Mathcad Prime Trial or Express Edition From Where to Download Mathcad for Single User Account or for Student Edition Mathcad Downloadable for Prime Version 11.0 Download Installer for PTC FlexNet License Server Manager Mathcad Installation Step by Step Installation Procedure for Mathcad Prime 8.0 Express Edition Step by Step Installation Procedure for Mathcad Prime 9.0 Step by Step Installation Procedure for Mathcad Prime 10.0 Step by Step Installation Procedure for Mathcad Prime 11.

Hi,  How do I install the XMCD/MCD converter on PTC Mathcad Prime 10? Is the only way to uninstall and reinstall Mathcad and select the extension? This is on a work computer so is there any other way to install it without doing that? Thanks 

Hi, Is it possible to set the model accuracy of all components in an assembly to "Absolute" at once?I tried creating a mapkey, but it requires opening each part one by one, which is a tedious task. Any tips would be appreciated.

Is it worth to switch to Onshape from Creo.Part, Assembly, Drawing and in terms of all solutions.Please share the beneficial, if possible Thanks!  

We have created combined views in our Creo start parts which are used for MBD purpose. Now we have a requirement to update the previous Creo Models with the Combined views created recently. That is why I would like to know if these combined views can be imported from the models which have the combined views.The other option that we could think of to achieve this is to create a Mapkey. Our current Creo Parametric version is 10.0.6.0. Any suggestions would definitely help.

The MathCAD code generated by Chatgpt is pasting as text instead of Math input, and due to this issue it need to be manually typed in MathCAD. Is there any solution exist for this issue.  

After test installing the latest Creo 9 Platform Services Update Patch and the new PTC Universal Browser Utility as documented here (Creo and WWGM CEF Patch Table | PTC), I notice a new PTC executable running with Creo Parametric when signed in to Windchill, located in the Creo Platform Services load path.  I cannot find any mention of "ptc_uiservice.exe" in the PTC Knowledge Base or the PTC Community.   I have opened a PTC Support Case to add it to CS245546 and CS110511 with further details. Does anyone have any information on this new executable? 

Once upon a time, when a whiteboard was bitten by a radioactive spider and mutated into Mathcad, I wrote several sequence generation functions.   One of these functions was integers(a,b), which, given integers a and b, generated a list of consecutive integers between a and b, inclusive.   Whilst updating my library of such functions to Mathcad Prime 11, I was emboldened by the idea of handling real a and b.  Now, I could have gone the restrictive route and treated non-integer arguments as errors, but I decided to go with the flow and see if I could give some meaning to real inputs.   All went swimmingly in my imagination - just restrict the output of the function to those integers lying between a and b.  Until I thought about it for a few moments and realised that wouldn't work for certain cases - see the bottom of the screenshot below.     Any ideas for how integers should handle such cases to give "meaningful" results?  Or am I

Hello everyone, I hope you are doing fine!I recently calculated soil friction resistance force along subsea pipeline using Mathcad Prime 9.0.0.0.However, when I was inserting chart components to visualize the force along subsea pipeline, I got the message "This value must be real." in the chart component.Can someone please help? I attached the full calculation below. 

I've been trying to use the creoson libraries to pass parameters to a model and generate a drawing from javascript ... but the dimensions in model could not be displayed in the generated drawing.. when i try to do the following,dimObj = new creo.DimensionObj(); dimObj.name = "d0"; dimObj.showFlag = true; respdata = await dimObj.list({file:"mydrawing.drw", name:"*"});it returns a blank array when i trydimObj.show({file:"mydrawing.drw", name:"d0", show: true});to show an existing dimension from the model from which i generated the drawing, it reports, the dimension does not exist.. and ofcourse the dimensions are visible in creo when i manually use the "show annotations" toolbar button.. sadly, theres no show annotations interface function in creoson dimension module... any suggestions / help is appreciated