CAD

Came across this unseen ICON . Any one can throw some light on this one? Thx in advance.SEE ATTACH

Hi @agarland    On a similar note - I've found out that the linking process is based on Feature IDs. When updating the linked PVZ file, components (parts or assemblies) in   eBOM and sBOM and all of their visual attributes in Figures are compared and retained / erased based on their IDs. Those IDs are not changeable in Creo as far as I know. And IDs change whenever you change a component or replace it. In every such case the data in figures for this component is erased in every figure.    Here's an example - I've got a top assembly which contains a pallet (which in turn consists of several parts). Someone revised the pallet assembly and added several new parts retaining the rest. In the top assembly they for some reason deleted the pallet assembly and assembled the same .asm component.    The result is that the pallet is the same item as it used to but with a new Feature ID. When you open any c3di file which contains this top assembly the pa

In Creo, I'm getting lot of Windchill Icons just above the  model tree. Please let me know if anyone see this issue. Usually we will get one Windchill icon for one part right. but I'm getting Creo window with lot of Windchill icons as below. Please some one help me on this.   Thank youKumar B

 Hi everyone, I just got access to Creo 11 and I'm struggling with one of the new features they added.For this model I want to use 4 axis HSM, however even if I select the B axis as rotatory (which means it rotates around the Y axis) the machining area I can select is always a cylinder around the Z axis and I can't figure out how to change it. My work center settings also specify it revolves around the Y axis but it just doesn't allow me to change the axis of the machining area. Any idea on how to solve this?

Hi, is the current lmadmin upgrade path, really uninstalling the old version and installing the new version from scratch?In the past the setup recognized the old installation and upgraded it. at least a few years ago.br Bernhard

Hello all,I noticed that after creating the drawing changing font of the annotation doesn't affect the embedded symbols like plus minus sign or diameter sign. For example dimension font is set as arial WGL first:But setting it to CG times, only the dimension numbers (23 and 0.1) is changing but not symbols:Is there a way to set font format for all symbols effecting the annotation on drawing?Thank you for your support.Have a nice day.

I am using Creo 9.I have received a large step file with over 1k components, I have imported it successfully and now I need to rename some of the files. I tried to use "Use template" option - no matter what I choose to do - the generation of file names would wipe out all of the values in the "New File Name" column (see screenshot attached). I tried  asterisk symbol in front, at the end, or both in front and after the characters i need to replace; i also tried using suffixes and not using suffixes for the new file name. I also tried File > Save, edit file list in excel, and then import it back, but it doesn't apply the renaming when importing.I see most of the problems with file names being too long, but I can't remove sections of file names using template. For example, i need to replace "STEEL" in the names of the files with "S" in 200 files, but no matter what I do I can't make it work. If i use "Template" then it wipes out all names, or if I Export the file nam

I am using Creo Simulate Release N/A and DatecodeN/ADie Modalanalyse ergab 58 Eigenmoden. Danach möchte ich eine dynamische Analyse im Zeitbereich machen (um die Erregerkräfte in die Struktur einspielen zu können). Wie gewohnt natürlich im Reiter "Vorherige Analyse" die besagte Modalanalyse gewählt. Weiters möchte ich die Dämpfungskoeffizienten für jeden Eigenmode individuell eingeben ... also dementsprechend eingestellt ... und ich hätte erwartet, dass ich nun 58 Eingabemöglichkeiten bekomme. Leider wurden mir nur 4 Eingabemöglichkeiten (für die ersten 4 Eigenmoden) angeboten.Woran könnte dies liegen?Habe derartige Berechnungen schon öfter gemacht und konnte bis jetzt auch die Dämpfungskoeffizienten immer individuell einstellen.Danke schön für Hilfe.SG Markus Plainer

Dear PTC Support Team,I created my account yesterday and successfully activated the 30-day trial license for Mathcad Prime. The application initially showed that I had 29 days remaining. However, after closing and reopening the software, I lost access to the full version.Additionally, my local license file does not appear to work, and I can no longer use the application.This is extremely urgent, as I need access to Mathcad to complete my thesis project in order to graduate from university.Please assist me in resolving this issue as soon as possible.Thank you in advance for your support.Kind regards,Florin Poppopf34620@gmail.com

I am making a spline in a part based on a large collection of points I am creating from a file.  When I assemble this part into an assembly I want to know the location of these points relative to the assembly coordinate system.  Is there a way for me to measure the x,y,z distance from the assembly coordinate system to those points all at once instead of having to do hundreds of individual measure commands?  Creo Parametric 8.0.5.0

Creo Parametric 10.0.5.0 I am trying to create a plug weld. I have had success with several on one side of the weldment, but when I try to create the plug welds on the opposite side the weld seems to project to the opposite side. I have tried using the opposite surface of the red surface, but it just projects to the opposite side of the weldment.  

to whom it may concern... Hi there, I recently installed Creo Parametric 10.0.8.0.As it turned out, the debug console, you can activate by adding "set CEF_DEBUG_PORT=9222" to your start command is broken in the latest release of Creo 10. Usually, You get debug information displayed, when You open "http://localhost:9222/" on the computer running Creo Parametric.In 10.0.8.0 that address just shows a blank page (NO "This site can’t be reached" error !).In 10.0.7.0 everything works as intended. I tested this on several machines. Also tried to install both versions parallel. But to get the console working again, I had to uninstall Creo completely and reinstall 10.0.7.0 again. 

I entered registration data to obtain a download link, received the link, and downloaded the installer. When I run the installer, it starts unpacking, but at the end of the unpacking process, the installer simply closes, and that's it.I tried extracting the installer and looking for the files mentioned on forum, but the only executable file in the installer is setup.exe.I also followed the advice from: https://www.ptc.com/en/support/article/cs200121?_gl=1*1vpgx6s*_gcl_au*MTU0MDU5NTUzNy4xNzUwMDU1NTA3*_ga*NjYzMzMxOTgzLjE3NTAwNTU1MDQ.*_ga_7NMP2MSYPM*czE3NTAwNTU1MDUkbzEkZzEkdDE3NTAwNTk4MDEkajYkbDAkaDA.

can't download

Hi all,I want to information on the layer hidden item. Why some items are in this layers and why when i move this items to the others layers like show item layer and i save the layers state,I see the item correctly on the view of drawing but if i save the modifications when i close the draw model et i open this after, this modifications are not save.I add screen shot toexplain my requestSteo 01Step 02 Step 03

Hello mathcad 10.0 Prime User,I wanted to ask if someone knows how to use the the "solve-block" to find two missing variables in an equation. Or if there might be a different way? I am searching for h1u und h1o. And h1o depends on "a" and h1u.Thanks for any help. The mathcad-file is attached. Saro 

I have previously installed Mathcad on my computer a few times over the last few years, when a class required it. I am trying to install the free version because I am teaching a class, and although I have entered my credentials several times, clicked download and waited a few hours (checking spam too) I haven't received a download link. Any ideas on how to get access to the free version? Thanks!

I am trying Mathcad Prime for the first time. I have Mathcad 15 files that I would like to open in Prime. Could you tell me if I can do it in the trial version?

Customizing the pop up/hover display of creo parametric model names in the graphics window to include an additional parameter such as Title or PTC_COMMON_NAMEIs this just straight up an enhancement or is there a current customization method freely available?For example.    In my screenshot it shows:    SYNTAX -->ITEM:F#(FEAT TYPE):FILENAMEOn Screen --> Edge:F5(IMPORT FEATURE):601301I want to show the same plus an additional Parameter to the right of FILENAME such as PTC_COMMON_NAME as in my mockup (Green Box) below.

HeyMy file for my exam crashed while saving and now it wont open. See picture. Can you help me recover just a fraction of the data? Also Im not able to attach the file for some wierd reason.

I am having an issue with printing Creo drawings. Every time I print a drawing, the print comes out with a very thick outline. I am attaching pictures to better explain my issue. The left picture shows a drawing view, and the right picture shows the print view. I recently switched from SolidWorks to Creo and never had this issue with SolidWorks, so I don't know how to fix these outlines. Any help would be greatly appreciated.drawing viewprint view 

I am using Creo Parametric Release 11.0 and Datecode11.0.3.0Is it possible to factor in gravity in cabling design to get a more realistic representation of slack and mass effect? I haven't found any related article or post in the community.

I am using Creo Schematics Release 11.0 and Datecode11.0.0.0dovrei disegnare uno schema 2D di un impianto frigo (moto-condensante)Non ho trovato un tutorial riguardo ad impianti idraulici o frigo. esiste?Creo Schematics è lo strumento giusto?

Hello everyoneI've had the same problem as descripted here twice this week:Unable to activate Excel componentI work with an embedded excel table which contains a function. At a certain point I get the error message "Excel is busy; can't activate Excel. Make sure that cells are not being edited in Excel and try again in a few seconds." but there is no instance of excel open. Upon restarting mathcad and/or my computer the problem remains.Does anyone know how to solve this problem?Could someone please check the appended file so I can exclude an error of my sytem?Cheers!

Does FIND stop searching for a more accurate solution when it finds a solution satisfying CTOL?  For example suppose I want to find temperature to within .5 F and I set CTOL to .5.  Will Mathcad stop searching when CTOL is met or will it continue searching until some smaller CTOL is achieved?  Note: my Solve Block is solving for 1 unknown with units (BTU/min).  My constraint has units of degF.  I found that units can be applied to CTOL but then FIND does not work.  Also I have a case where I set CTOL to .4, but the FIND solve block found an answer (solution) at which the error is .53733 which is larger than CTOL.  So why is FIND returning a solution? PS:  My constraint is 0 =ABS(T1-T1x)  +  ABS(T2-T2x)