CAD

I am using MathCAD Prime 10I’m working with a system of four vertically stacked blocks, each 4 feet high. The widths of the blocks are labeled B1, B2, and B3, and the bottom elevation of the lowest block is defined by BotEL.The ground surface is sloped and described by a series of known (X, Y) coordinates.For each block, I need to:Determine the coordinates of two intersection points with the ground surface.These are labeled a1 and b1 for the first block, a2 and b2 for the second, and so on.The "a" points represent vertical lines extending down from the right edge of each block. Their X-coordinates are defined by the block geometry, while the Y-coordinates should be interpolated from the ground surface at those X-positions.The "b" points correspond to lines inclined at an angle ψ relative to the ground surface, as illustrated in the attached image.I've also attached a Mathcad file and a diagram to help illustrate the problem setup.Note: This is a more detailed version of a previous ques

I'm trying to build a CREO Mechanism for lead screw, I'm using Slot connection to define the lead screw mechanism. Now I'm running a dynamic analysis by selecting friction in external loads options. but im unable to input the friction value. Does creo assume a value, or can  I input a value

Prime 10. I want to make an xy plot of a function.  The function evaluates correctly.  But when I plot, it says the units are not compatible.  I assigned units to the axes

suka I have mathcad installed in my PC, and want a free 30 days license but cant obtain it due to not being able to find a "product code".

I Designed a conical spring in Creo Parametric and am attempting to do analysis on the spring. When I applied the constraints and forces on the spring and ran the analysis, the analysis failed and said problems were encountered while preprocessing the features for the highlighted surface. Only the middle section of the spring is highlighted as part of the error. Can anyone help me as to why this may have happened

Creo Parametric 10I want to make a keyboard shortcut, which can change windows, so shortcut for this button here.I have tried go to options, customize, and keyboard shortcut. But I only found other things like save, activate...But windows isn't here.Mapkey also don't work.Every time changing parts or assemblys have to click to this button is not quick, so it is better to have a shortcut.Can someone help? Thanks. 

Hi Community, We set-up a family table of our screws and wanted to add this now to IFX.For local tests, I saved the generic to ...\Common Files\ifx\parts\ifx_fastener_archive\nb__312350pxxxx.prt The .dat file looks like this: !--------------------------------------------------------! Sechskantschraube! Hexagon head screw!--------------------------------------------------------SCREWTYPE 20UNIT MMSURFACE 763AXIS 745CBSCR DIN974-2 R1INFO SCR-HEX-ISO4017-A2-70!Enter the name of the Family Table Part!---------------------------------------FAMPRT nb__312350pxxxxSYMBOL STRING DN LG B S K DG PINSTANCE STRING DN LG B S K DG P#FAMTAB M<DN> d58 d57 d57 d20 d19 d70 pitch When I now want to add a screw I have a weird behavior:1. When the generic is not opened in Creo, I don't see any thread size in the drop down, but lengths.2. When the generic is opened, I see the correct Thread sizes and lengths in the pop-up window. But independent what I select in this pop-up, it alway

Good morning, everyone,I'm currently working on a Mathcad sheet. I have two time-dependent functions that I want to combine with a differential equation. However, I keep getting an error message, and I'm not sure what I'm doing wrong.I managed to get it working in MATLAB, but I would like to finish this properly in Mathcad. The issue occurs on the last page, where the solve block isn't isolated from the rest of the calculations Does anyone know how I can solve this? Thanks in advance!

Here is a free Tutorial for Creo Simulate Elite (Creo Design Essentials User).   3 x part in Creo 11 HomeUse or 3 x part as STEP

Is it possible to save and upload files to Model Manager using Creo Parametric?

It was saved in teamcenter. While opening from teamcenter image is not visible only dimension is visible. 

In creo view 5 or 6 or 7 the stereoscopic will support active or passive or both to view the models. If Available, please share me any reference documents related to this.

Hi,I have a nested loop where I wish to calculate crack growth under a block of stress range data and then continue the calculation for multiple blocks to see how many blocks of data it takes until failure (crack is half diameter of shaft).I am sure there is a simple fix, but I cannot seem to find it!Any assistance would be appreciated. Ross

Hi Mathcad 10.0 Prime User,I want to make a table with different variables. My Q is always different, on which the other variables depend on. Q has to be 2 or higher. So if someone can just show me how to do the basic table, I will than use my Q's etc. I really have no clue how this might work in Mathcad. File is attached. Thanks.Saro

I found a nearly 4 year old post saying this was not possible. I am asking again because I have read about updates to simplified reps in more recent revisions.   Does anyone know if Creo 4 and Creo 5 includes the ability to update the mass of a part relative to an active simplified rep?    Thanks in advance.

Hello @LucMeekes ! I am using prime 9.0.0 and I cannot seem to find an option to add multiple entries to a single plot like in this answer. I can just copy and paste the plot you generated, and it works, but I would like to know how it is done, please 🙂   Reference topic: https://community.ptc.com/t5/Mathcad/Multiple-Plot-Entries/m-p/652806#M925 

Hi, me an my team are using Creo Parametric 10.0   We are trying to export our drawing file to pdf for a technical document, but everytime we do, even with different export settings, once the pdf is created we can see that the notes are ok but the views of the part result front-view only and stretched. We originally set 4 views: Front, RSide, Top and 3/4 so we're confused.   We don't get what may cause this issue since the first export was just fine, but from the 2nd on the mess began, we also tried with different files and it happens still.   The same thing won't happen with .png or .tiff export but the image quality is poor so the use it's no option.   Any suggestion? Thanks in advance.  

Came across this unseen ICON . Any one can throw some light on this one? Thx in advance.SEE ATTACH

Hi @agarland    On a similar note - I've found out that the linking process is based on Feature IDs. When updating the linked PVZ file, components (parts or assemblies) in   eBOM and sBOM and all of their visual attributes in Figures are compared and retained / erased based on their IDs. Those IDs are not changeable in Creo as far as I know. And IDs change whenever you change a component or replace it. In every such case the data in figures for this component is erased in every figure.    Here's an example - I've got a top assembly which contains a pallet (which in turn consists of several parts). Someone revised the pallet assembly and added several new parts retaining the rest. In the top assembly they for some reason deleted the pallet assembly and assembled the same .asm component.    The result is that the pallet is the same item as it used to but with a new Feature ID. When you open any c3di file which contains this top assembly the pa

In Creo, I'm getting lot of Windchill Icons just above the  model tree. Please let me know if anyone see this issue. Usually we will get one Windchill icon for one part right. but I'm getting Creo window with lot of Windchill icons as below. Please some one help me on this.   Thank youKumar B

 Hi everyone, I just got access to Creo 11 and I'm struggling with one of the new features they added.For this model I want to use 4 axis HSM, however even if I select the B axis as rotatory (which means it rotates around the Y axis) the machining area I can select is always a cylinder around the Z axis and I can't figure out how to change it. My work center settings also specify it revolves around the Y axis but it just doesn't allow me to change the axis of the machining area. Any idea on how to solve this?

Hi, is the current lmadmin upgrade path, really uninstalling the old version and installing the new version from scratch?In the past the setup recognized the old installation and upgraded it. at least a few years ago.br Bernhard

Hello all,I noticed that after creating the drawing changing font of the annotation doesn't affect the embedded symbols like plus minus sign or diameter sign. For example dimension font is set as arial WGL first:But setting it to CG times, only the dimension numbers (23 and 0.1) is changing but not symbols:Is there a way to set font format for all symbols effecting the annotation on drawing?Thank you for your support.Have a nice day.

I am using Creo 9.I have received a large step file with over 1k components, I have imported it successfully and now I need to rename some of the files. I tried to use "Use template" option - no matter what I choose to do - the generation of file names would wipe out all of the values in the "New File Name" column (see screenshot attached). I tried  asterisk symbol in front, at the end, or both in front and after the characters i need to replace; i also tried using suffixes and not using suffixes for the new file name. I also tried File > Save, edit file list in excel, and then import it back, but it doesn't apply the renaming when importing.I see most of the problems with file names being too long, but I can't remove sections of file names using template. For example, i need to replace "STEEL" in the names of the files with "S" in 200 files, but no matter what I do I can't make it work. If i use "Template" then it wipes out all names, or if I Export the file nam

I am using Creo Simulate Release N/A and DatecodeN/ADie Modalanalyse ergab 58 Eigenmoden. Danach möchte ich eine dynamische Analyse im Zeitbereich machen (um die Erregerkräfte in die Struktur einspielen zu können). Wie gewohnt natürlich im Reiter "Vorherige Analyse" die besagte Modalanalyse gewählt. Weiters möchte ich die Dämpfungskoeffizienten für jeden Eigenmode individuell eingeben ... also dementsprechend eingestellt ... und ich hätte erwartet, dass ich nun 58 Eingabemöglichkeiten bekomme. Leider wurden mir nur 4 Eingabemöglichkeiten (für die ersten 4 Eigenmoden) angeboten.Woran könnte dies liegen?Habe derartige Berechnungen schon öfter gemacht und konnte bis jetzt auch die Dämpfungskoeffizienten immer individuell einstellen.Danke schön für Hilfe.SG Markus Plainer