Creo+ and Creo Parametric

Hello community, I am looking to make a repetition of holes on a cylinder following a helix and points positioned on this helix. Knowing that each hole must be perpendicular to the central axis of the cylinder. Thank you for your help. Patrick   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- Bonjour la communauté , Je cherche à faire une répétition de trous sur un cylindre suivant une hélice et des points positionnés sur cette hélice.Sachant que chaque trous doivent être perpendiculaire à l'axe central du cylindre.Merci de votre aide.Patrick

“We’re using the eye as a window to the health of the body. We’re developing solutions to someof humanity’s greatest healthcare challenges.” Our eyes contain a vast amount of information about our health, but they’re an untappedresource. Assessing the eye requires contact, and that can be uncomfortable and unsafe, so it’soften avoided. That’s why Occuity’s technology is game-changing. Their contactless handheld devices not only unlock the full power of the eye and open up aworld of healthcare opportunities, but they’re also so easy to use that patients can assessthemselves. In this episode we meet Occuity’s head of marketing Richard Kadri-Langford, anddesign engineer Jamie Serjeant. They take us on a tour of Occuity’s HQ in Reading in the UK,to learn about two of their devices, the PM1 Pachymeter and their non-invasive glucose metreIndigo. We even get a peak behind the scenes in the ‘Midnight Room’, their secret developmentlab. We also hear from Jon Hirschtick who explains how Occuity

Dear All,   Currently by Using &asm.mbr.cparam.POS unable to use filter & Flat/Rec function in repeat region BOM.A solution is needed   With regards,Thanoj Kumar V  

I just signed up for Creo Elements Express 8.0 and got the message that there is no internet connection even when my internet is working fine. The screen asks for a Proxy Name and Port, but I don't know what I should put in. I am able to bypass the screen and got a 72 hour countdown to use the software offline.  Will I have to pay for the software after 72 hours? Why won't it connect to my internet through my computer?Thank you,

I read that I cannot add a jog point to the leader of a radius, diameter, or chamfer callout. This is problematic, but I discovered a possible workaround™ in this forum... You reference the d### symbol in a leader note. The problem I have now is that the dimension does not show as BASIC. Is there a workaround for this workaround to make this function properly, or perhaps an option I missed? The attached image has an example... this note references the dimension which is set to basic, but it does not display as basic.

I am creating family table components. The probelem I have is that, I cant enter description for all instances of family table, so i created a relation like DESCRIPTION=" BOLT DIA &DIAMETER IN , &LENGTH IN LONG" so that it will display like, BOLT DIA 1 IN, 2 IN LONG Instead it displays like, BOLT DIA &DIAMETER IN , &LENGTH IN LONG in the description. Can someone say whats wrong with the expression ??   Thanks, Santhosh

Creo has added blue insertion line in model tree in Creo 7.  Is there any way to disable blue insertion line.Let insertion line change back to older verion (green arrow). 

I made modifications to my fasteners, but when I assemble a fastener size that is checked into windchill it uses that version instead of new modified version. Is there anyway of preventing this?Thanks

Hello,I have a problem with the creo post processor when i call an other coordonate system such as G55.Some context :I have 2 parts on a special clamping pallet with their own origin. G54 and G55.The final sequence is engraving serial number of each part. The problem :The first and the last point of the serial number have the same Y position (Y P1 = Y P2 = -12).The serial number is engraved at the same position on the two parts. By the way insisde their coordinate system Y positions are the same. D1 = D2In G54 Y P1 = Y P2 = -12 and in G55 Y P3 = Y P4 = -12 this is the corresponding code : What happens in real life : At the end of the first block, the cutter rises and keep the last  Y position.G55 is read but because Y position is identical, Y is not recall on line 392. The cutter move to X -59.5 in G55 but stay at the same Y position instead of going to Y -12 in G55. Is there a way to force the post processor to output X and Y in case of changement of fixt

Hello, I am creating a function that prints multiple drawings at once.Now I'm getting options with ProPrintPCFOptionsGet and using ProPrintExecute to print the printer, and every time I use the ProPrintExecute function, I'm getting a pop-up specifying the printer.Of course, I know it's a necessary pop-up, but it's uncomfortable because a printer option pop-up appears whenever one drawing is printed when multiple drawings are printed.Is there any way I can adjust this pop-up so that it doesn't come out? The image of the pop-up is attached at the bottom.Thank you.

I am using Creo Parametric Release 4.0 and DatecodeM150 Creo software When opening the built-in browser interface of Creo software, it gets stuck and cannot do anything (the process does not display and is unresponsive). After killing the process, delete the cache folder and then open the software and use it normally. However, after exiting the software normally and entering it again, the same problem occurs. ; After modifying the built-in browser type to Google, it can be used normally, but you need to enter the user name and password every time. Even if you check Remember Password, the built-in browser interface is stuck and cannot be used (the process does not display and is unresponsive). Kill it. After the process, delete the cache folder and then open the software and use it normally. However, after exiting the software normally and re-entering it, the same problem occurs. After changing the built-in browser type to Google, it can be used normally, but you need to enter the

Hi All, I'm using PTC Creo 8.0 with simulate basic extension. I'm running into a very simple problem but can't find the right solution yet.To visualize the issue I made a simple strip with holes on both ends.In one hole I created a bearing load in the length direction of the strip.In the other hole a pin contraint.I my world this should give the same stress results in both holes. After all: "For every action in nature there is an equal and opposite reaction". But as shown in the screenshot below it isn't the same at all..I've already been testing with different solutions, but none of them resulted in equal results.Most close so far was to divide the hole in different regions and connect the upper region with a point in the center with a rigid link. However this means a lot of trial and error with the size of the region which is not very practical and very time consuming Somebody here knows what the right solution is? Thanks in advance!  

I have a vendor that is asking for a 2D dxf file for their software. What is the best way to export (if there is one) to a 2d dxf file.

Good Morning. I am a new user for Creo schematics 9.0. I would like to use our company formats rather than default templates. Can you pls guide me how to retrieve other formats/Templates in Creo?

Why when you pick a feature in a part on the screen it only highlights the feature in the model tree under bodies???  This is dumb and should be changed to highlight the feature in tree in its location, not under bodies.   PLEASE FIX A.S.A.P.  It is better to know where it lies in the tree structure, not the body.  

“We are on the brink of a robotic revolution. In a few years it will be possible to have a robotthat is a reasonable member of a family or household” The dream of robotics is to take on the mundane tasks of everyday life, so we can focus onwhat’s most important to us. With developments in artificial intelligence happening at such arapid pace, that future is drawing ever closer. So what’s needed to bring AI and roboticstogether in a way that’s truly transformational for humanity? When will we have our own RosieThe Robot from the Jetsons? IT solutions company isento is opening robotics up to everybody with pib - their printableintelligent bot. Pib is a 3D printed robot with a humanoid face, moving arms and a torso - but thehope is that one day it’ll be so much more. We meet the visionary behind pib and CEO of isentoJürgen Baier. In this episode he explores the features of pib, and how he’s enlisting the help ofthe global community to achieve isento’s bold ambitions for the project. We a

“You’ll park it at your house, drive it to the nearest airstrip, unfold your vehicle, take-off, fly500km, land again, and drive to your final destination.” Flying cars have long been the poster child for the future - a sign that we’ve reached anincredible milestone in technological advancement. But that vision of the future has beenconfined to science fiction for many decades - until now. PAL-V is building the world’s first road-legal flying car, and it’s extremely close to liftoff. The aimis to make general aviation practical for everyday mobility. In this episode we sit in the drivingseat of the stunning PAL-V Liberty, a car that flies like a gyroplane. We meet PAL-V’s marketingdirector, Joris Wolters, who explains the engineering that’s gone into developing the Liberty, andwhat the car is capable of. We also hear from Mark Lobo, who heads PTC’s Windchill product lifecycle managementDivision. He explains how PAL-V uses the PLM solution to deal with its rapid growth and strictdata co

“Even on my 8th launch - still goosebumps. I mean, you realize that engineers can cry.” Satellites are an essential part of keeping our modern lives running, allowing us to navigate,connect and observe the world from a phenomenal vantage point. But when a satellite islaunched into space, it can take many months to get into position in order to start its mission.That was until D-Orbit changed the game. Their satellite carrier ION optimizes space operations by delivering satellites to their finaldestination in a matter of days, instead of months. D-Orbit is the world’s first space logisticscompany, and in this episode we find out how the company got started. We meet D-Orbit’s CTOLorenzo Ferrario in the mission control centre, and hear stories of past launches when emotionsrun high amid the electric atmosphere. We also hear from Brian Thompson, who heads up PTC’s CAD division. He explains how D-Orbit uses PTC’s CAD software CREO to model their bespoke satellites in a fast and efficientwa

“Cupra is a brand born in the 21st century. We call ourselves unconventional challengersbecause we want to do things differently.” If you think electric motorsport lacks emotion, prepare for an awakening. The passion pouringout of Cupra’s head of racing, coupled with the incredible sounds recorded in the driving seat oftheir championship racing car will show you why electric racing is earning its place in themainstream. Cupra Racing are pioneers in the field, developing the first ever electric touring racing car beforethere was even a race for them to compete in. But that’s all changed, and years later Cupra haswon titles in multiple events, from Formula E, to Extreme E and the FIA eTouring World Cup. Inthis episode we head to the company’s factory in Barcelona where they produce, test anddesign their racing cars, and meet the man in charge of turning Cupra’s dreams into reality, XaviSerra.        

“We can explore the controls and function of the product, and look at the texture of theupholstery. And it really does allow the customer to see what their stairlift will look like withintheir home”. Our homes are sacred, and when we modify them or bring in new things, we want to know thatthe change will be seamless - that we’re still going to love the space we inhabit. This isespecially true when you need a stairlift installed for the first time, a piece of equipment you maynever have imagined would find a place in your home. Stannah is an elevator company, working with augmented reality to bring comfort to theircustomers. From upholstery choices to chair types and rail colors, Stannah Engage allows thecompany to show their customers exactly what their new stairlift will look like in their home - andhow it’ll move. In this episode we meet Charles Symonds, Stannah’s Digital ProductDevelopment manager, at their HQ in the UK to learn about the rich 100-year history of thisfamily-run bus

“The biggest organ in the human body is skin. Not addressing it is totally impossible in any typeof metaverse, or parallel world, that you would like to emulate.” It’s not enough that we can see and hear the virtual world, to become truly immersed we needto feel it - to interact with all our senses. And that’s exactly what Actronika is doing with itshaptics vest Skinetic. This incredible bit of kit recreates the sense of touch on your skin, usingadvanced technology to make your experience ultra-realistic. In this episode we learn about the three parts of touch that are required to create these high-definition sensations. Hear as our producer is plunged into a virtual world, bombarded with feelings of wind, hail and fireballs. And find out what the future holds for the technology, and the industries it's set to transform.    

“This, as an innovation… something people thought was impossible. It really changes the gamein how we deliver radiotherapy to cancer patients.” Fighting cancer is not an easy task. Each body responds differently and each tumor is unique -so treatment must be personalized and precise. But, as companies like Elekta push forwardadvancements in the field, cancer care is becoming more targeted and effective than everbefore. Elekta is a company creating cutting-edge linear accelerators, devices that deliver life-savingradiation therapy. In this episode we meet Chris Gilpin, Chris Flint and Mark Range at thecompany’s HQ in the UK. Find out how radiation therapy works, and why it’s playing anincreasingly important role in cancer prevention. Get up close with the machines and take a tourthrough the factory to see how they’re built. And learn how Elekta’s IntelliMax system is bringingradiotherapy to underserved and remote countries all over the world.    

“It’s amazing how comfortable the machines are by taking noise and vibration away.” You’re about to walk past roadworks on your street, ready to throw your hands up over yourears - when you realize you don’t have to stop your conversation. In fact, you can even hear thebirds singing. Bliss. This is the promise of the electric construction vehicle. Although essential, the constructionindustry has a big impact on both climate and noise pollution, so Volvo Construction Equipmentis leading the charge in turning the industry green. Setting up at Volvo CE’s North American Customer Center, we meet Dave Vandersleen, RayGallant and Lars Arnold. Find out how these electric machines actually feel better, more reactiveand stronger than their predecessors. Hear the impressive ECR25 compact excavator gearingup. And find out why these machines are being used in zoos - one of many unique andunexpected applications.    

“Imagination is one of the most profound human qualities. Every great achievement in human history has started as a work of imagination.” Beginning life as a passion project, Genesis Custom Sabers has since grown into Rob Petkau’s full time job. From cobbled together ‘junk sabers’ to immaculately crafted illuminated swords, Rob has honed his craft over the years, and now places only the highest quality sabers in the hands of wannabe Jedis. In this episode Rob explores the evolution of his designs, and how advances in technology have allowed him to create perfectly custom fit blades. He explains how he creates and designs the sound fonts that bring the sabers to life. And he discusses the immense appreciation he has for his fans, some who treat their sabers as ‘shelf queens’, and others, like Jimmy, who test (and break) them in combat.    

Was on Creo 3, just upgraded to Creo 10. I'm not happy with the new GTOL features. It seems significantly more limited than it was in Creo 3. From videos online, it seems the upgrade happened in Creo 4. Main gripes:1. What happened to the ability to select placement (i.e. free note, leader, tangent leader, in dim, in GTOL, etc)? You can select a reference but the ability to select how you want it displayed is greatly limited.2. I'm attempting to add a feature control frame to a hole note. It's not possible and gives a very wonky result. There's no way to correct this within the GTOL.I found this suggestion which I can't get working, and it's a poor workaround for what was functionally possible in Creo 3 anyway.Solved: how to place a GTOL on a hole note - PTC Community3. Tangent GTOL leaders (i.e. flatness and parallelism). There's no option to flip the direction of the FCF. You're stuck with whatever orientation it gives you. (EDIT: This seems to work on horizontal but not vertica