Creo+ and Creo Parametric

Hi guys, Im still little bit confused in rule based layers ... Im currently working on Clearance&Creepage analysis and I didnt find any nice tool to hide all insulator when Im setting my nets so I decide to hide all PARTS with CTI over 0 by rule based layer ... The CTI is in parametres of each part but I didnt find out how to do that ... Is it possible to make rule with parametres ?  Thanks 

Hi , I am a user of Creo 9.0 version and is the user of the student version , As far as I remember during the installation of the files, I clicked for the simulation feature but now when I am using it it shows that the request is failed ,I really want to test my parts and want to present it to the professors so plz help me .   

Hi, we need to create a 3d model as shown in the attachment. Please let me know where can get a training to achieve such part. thank you best regards, carlos.   

How to create multiple harnesses under same assembly in order to have family table instances ? or how to copy harness without having bend radius violation ?

I am looking to add custom symbols to the text editor symbols in Creo drawings.  My drawing properties symbol_font configuration is set to asme.  I know how to draw and add them to the stroked_symbol_asm.src and compile the files, but I need the location of the little thumbnail images you see in the creo ribbon (Picture attached).  I've searched through the common files to no avail.  They are probably *.pngs, but I cannot find them.  If I were to set the symbol_font configuration to "legacy", those thumbnail images are set in loadpoint/text/resource folder.  But I want it set to asme, and again, cannot find those thumbail images ANYWHERE.  Any help would be appreciated.  Thank you.   

Hi, is it possible to get a Creo license for privat usw only?Is there a possibility or something? Thanks for your answers. Regards   

I am using Creo Parametric Release 9.0 and Datecode9.0.3.0From Creo Parametric 9 ,When registering a Windchill 10 server in Server Management , when clicking on Check button error pop us: Fatal Error . A trackback has been .....The error in the trackback log is :Here are the errors that I faced-------------------------------------------------The trace creation timestamp is: Fri Feb 24 12:13:44 23The executable build timestamp is: Thu Dec 22 05:09:19 22The datecode is: 2022414The pro machine type is: x86e_win64The process ID is: 22076The traceback type is : CRASHThe logger exit status is: 00003The Trail is: trail.txt.74The release is: 9.0The product version is: 9.0.3.0The product title is: Creo Parametric-------------------------------------------------Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 12700.Main Thread 12700=====================0x00007FFBDD651404 NULL (NULL:0) (ucrtbase:0x00007FFBDD640000) ( 0x1, 0xbb983360, 0x0, 0xe3dae898 )0x00007FFBDD651394 NULL (NULL:0

Is it possible to import a model from inventor into Creo and keep an associative link?Or has PTC made it impossible without the collaboration extension? 

Hello community, is there any opportunity to perform a search in Windchill to see, how many CAD-objects are using multi-body?We don´t use multi-material yet, but multi-body design is available to our end users. And nor they designate multi-body-attributes before check-in. So, does any other attribute exist to get further information about that? Thanks a lot + best regards! Rudi   RE: post

I am using Creo Parametric Release 8.0 and Datecode8.0.4.0Hi Team,When user is saving the file to .stp or .iges, its time consuming or no response fro Creo parametric.It takes more time than the other user, sometime no response.

Hello Community! I need to create a company logo, with given dimensions and put it onto a *.frm-file, which is then the base for our drawing template(s).The provided dxf-file from the designers is too big: After I filled it and put it into a symbol. (around 50kb in the frm and over 100kb in the pdf.)I'm trying to be clever now:The logo only consists of letters and is shaped like a fully-filled worm with constant thickness and, the problematic part, round ends. Question: Is there a line-style that has round ends? How is that called and how can I include it? I'd also be thankful for just a link.In that case, I could just write the letters with a line and adjust the line-thickness according to the overall logo-size. If that is not existing, I have another, obvious solution: line size half the logo-letter-size and draw closed, half-thickness worms. Bonus Question: I need to include the registered trademark-symbol. Did i see it correctly, that I can vary the line thickness fo

How can I find my serial number on PTC Creo 7.0 ( I am using a client computer not a server computer)?

Hi Everyone,  I need help trying to figure out what the buw folder file is:  It seems like it contains two folders named AFX and IFX. I am assuming it is some type of cache or templates maybe? Currently, this folder is sitting in my documents where I have important documents that I use on a daily basis, and having this folder sitting there maybe seems like a bad idea. Is there any way I change the default location of that folder? If so, do you know how I can do that?  thank you so much in advance!    

Hi, My issue was I have a .pvz file which has no colour and I wanted to apply colour to it. It's a big assembly file and I try to export it to .step file and try to apply the appearance to it but the creo is crashing while opening that assembly file. So i need help that how can I apply colours to .pvz file in creo illustrate 

Drawings for some parts can not be found in Creo Parametric despite they are with status “released” in Windchill.

Hi all,We currently have a PC in desperate need of upgrading to Windows 10.I have two drives inside, one boots Windows 7 (HDD) with a working, licensed Creo installation, the other is on Windows 10 (SSD) - this currently has Creo 4.0 'Parametric Simulate Direct Layout' (as it says on the back of the DVD box) , but I cannot get the license to work despite requesting a new one from the license portal on the website.So, I'd just like to know if the procedure to transfer the license is any different? It has the same MAC address, but the computer has a different host name (edit - NOT a different domain name!). I'm quite new to the organisation and there's no documentation on how this was installed previously,. The guides I've watched don't really cover whether or not this will work.Any tips on the procedure for doing this with minimal downtime would be really appreciated. I did try calling but it was very difficult to navigate and couldn't find anyone to speak to.  .  

I am using Creo Parametric Release 7.0 and Datecode7.0.6.0When using CREO Parametric I cannot drag the green line in the model tree anywhere. When I try I get a red circle with a line through it.

Hi folks. Question, is there any way to link and lock the parameter of a mirrored part.Right now it copies the parameters, but it doesn't update if I change the part where the mirrored part was mirrored from .As you can see in the image. All those parameters are from the original part and are being copied . But it let me edit it. I need those parameters to be locked and being updated if i change their original part. Thanks in advance for the help.

Hi, I'm trying to create internal end caps on a framework assembly I generated using AFX. I'm used to being able to do this in SolidWorks (see documentation) but I can't find the equivalent in Creo - can someone please show me where I'm going wrong? Does this exist in a different menu?The closest I've found is the 'New Equipment Element', but this only generates external end caps and with a chamfer, not a radius. I'm expecting the tool to grab the radius from the RHS profile definition and able to be set internal/external dynamically.I've tried setting the 'T' parameter negative to achieve something similar but to no avail.Any help will be much appreciated, thank you!

I have to export DRW file to AutoCAD DWG format with certain layers as per customer specs. For example, all solid (continuous) lines have to be on Main layer, all axes an on Axis layer, hatches on its own layer etc.I have been trying to figure out the easiest way to do this by exploring two avenues: intf_out_layer and intf2d_out_dxf_mapping_file values.First case: intf_out_layer is NONE and intf2d_out_dxf_mapping_file values is not assigned (or it is using default Creo values). In TXT layer I placed all dims, notes and everything else that has text. Note how view lines were not selected. I am not sure what filter I should use for it. I also made TXT-TABLE layer to filter out tables.After purging DWG file I got this:All solid lines are under 0 layer, hidden lines are under Default2 and view line is under Default3. I will get to case intf_out_layer part_layer later because it also has issues I cannot resolve.Is there a way to filter continuous lines on one l

Is it possible to define a color from appearance.dmt to a specific material in the .mtl file itself? I want all parts made from SAE J995 Grade 5 to be a certain color. Is there an entry that can be put in the material file to change the color when the material is assigned?  

With a row selected within the point by "offset coordinate system” featurepress “s” to activate a mapkeyprompted “select a point in the model”select point in modelThe mapkey will then update the XYZ values for that row from the reference datum to the point that was selected in the model Notes: It will not be linked, if the point in the model changes the user will have to run this tool again to correct the points location 

Hello dear members, Can someone help: How to know if any joint operation is performed on Framework profile part or not? Model tree doesn't show that information. Thanks

Our users are finding that managing the current dtl (in drawings and models) to be cumbersome. For instance, adding dual dimensions to a drawing. A more accessible, user friendly dtl GUI would go a long way for users to manage their drawing specific settings.   Thanks!

I have weldment drawings that have had cosmetics erased. I wish to show welds in these views again.    The "unerase cosmetic" option does not appear when I right click - even when on the Annotate tab.    There doesn't seem to be a layer that has these cosmetics in it that I can show for the view. The welds are displayed as surfaces if that makes a difference.    Any ideas?