Creo+ and Creo Parametric

Check out this video on Creo Layout & 2D Drawing Sketcher from PTC Application EngineersPresenters: Lino Tozzi (Technical Specialist, Fellow) and Tom Quaglia (Creo Segment Sales )  

Check out this video on Creo Piping from PTC Application Engineers!Presenters:  Adam Manfredonia (Presales Technical Specialist, Principal), Lino Tozzi (Technical Specialist, Fellow) and Tom Quaglia (Creo Sales Specialist) 

For a very long time, we used to be able to explode a custom symbol into its parts within a drawing.  Can we still do this in Creo 7 and later?

Check out this video on Creo Layout from PTC Application EngineersPresenters: Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow). Click here for Creo Layout Learning  

Check out this video on Creo Piping from PTC Application Engineers Presenters: Adam Manfredonia (Solution Consulting, Principal) and Ryan Butcher (Solution Consulting, Fellow). Creo Piping Learning  

I am using Creo Parametric Release N/A and DatecodeN/AI would appreciate if you could please clarify the following for me about DHandles (pro_model_item in particular). Does the pointer to a DHandle  remain in memory, while the model it refers to remains in memory? For example when I use the ProSolidBodiesCollect function i.e, ProSolidBody* bodies{ nullptr };ProSolidBodiesCollect(proMdl) &bodies)t* o_body_num; ProArraySizeGet(bodies, o_body_num); will the memory addresses for the bodies I get as output remain valid during a session? What I see is that I can actually copy the addresses and use them elsewhere in my code. Is this accidental? When I call the same function again I get different addresses for the bodies though, so if the addresses remain valid do I keep opening new DHandles by calling the function multiple times? Should I be closing them and if so, which function should I use to do so? Thanks a lot

I have two revolve features one currently on and the other off. The first angle dimension below has the round dimension grayed out so I cannot change the precision. The second angle dimension (on a currently hidden feture) does not. How can I change the first one so it can be edited. This is a part with a family table so I'd prefer not to delete it and re-add it if possible.         Thanks, Dale

When I export a formula-based lattice (e.g. - diamond TPMS) as an STL, there seems to be a gap between the lattice structure and the shell.  Have you seen this with other users? Thanks,Thomas   

I want to know which customers are using CREO CSL and how where can I find CSL use cases? Or, if you have a document, please share it. 

I am using Creo Parametric Release 5.0 and Datecode5.0.0.0The single sign-on is abnormal, the web page can log in normally, but the Creo side needs to re-authenticate every time

Product: PTC Creo Parametric 9.0 Student Version I was reading the help about surfaces with the "STYLE" tool, but I don't get to understand the difference between triangular boundary surface, quadrangular boundary and trimmed rectangle. It is help there are not enough examples to be able to understand it. The page where I found that is: https://support.ptc.com/help/creo/creo_pma/r9.0/spanish/index.html#page/surfacing/style/Defining_Surfaces.html# Nor is it clear what the Trimmed Rectangle option is for, which explains point 5 on the following page: https://support.ptc.com/help/creo/creo_pma/r9.0/spanish/index.html#page/surfacing/style/Defining_Surfaces.html# I would appreciate it if you could clarify my doubt. Thank you.----------------------------Translated from Spanish to English at 10:33am IST on 30-01-2023. Translated by vnamboodheri using google translate.----------------------------Producto: PTC Creo Parametric 9.0 Estudent VersionEstuve leyendo la ayuda acerca de las superficies

Hi all, I have a UDF that is a sketched hole. All I am trying to do is edit the sketch to change the angle from 60 degrees to 65 degrees.   How can I modify this sketch? I know I can modify it on the fly, but I want to revise this UDF so when other people use it they don't have to modify the dimension on the fly.   When I go into the UDF Library and choose modify, there is no way for me to modify the original sketch. Also, I can't add the 60 degrees as a dimension on the family table.      

I am using Expert Moldbase Extension Release 14.0 and Datecode14.0.0.0Unable to open Creo with EMX extension. I get the following error messages:"Creo Agent did not initialize correctly. Please contact Technical Support if the issue persists."And:"Unable to start application 'EMX' due to failure in starting Creo Platform Agent."Here are the errors that I faced"Creo Agent did not initialize correctly. Please contact Technical Support if the issue persists.""Unable to start application 'EMX' due to failure in starting Creo Platform Agent."

I have this same issue. My computer died, I followed the links https://support.ptc.com/appserver/auth/it/esd/academicFree.jsp & https://www.ptc.com/en/success-paths/upgrade-your-creo-parametric/setup/download-and-install-creo and went through the installation on my new computer. However, during installation it gave me an error when I put in my SON. I went through the installation without licensing and put the license file in the PTC folder like this: c:\ptc\license.dat. After launching creo I get a license error. I think because I have a node locked license. But service won't help at all because I dont a have maintenance subscription. I paid for a permanent license so I feel like this is some sort of illegal loophole they have going. I'm assuming I need them to release the license from my dead computer so I can activate it on my new computer. Any ideas? I downloaded my license again from my PTC login but still no luck.

Hola,since PTC offer Home user Creo license program for personal use I am curious why doesn't support Windows Home editions as well? There is official support for Windows Pro or Entrerprise only but many users have installed Win Home on personal computers. Anyone tested Win 10 Home with Creo?My experience with Creo 6.0 on Windows 10 Home is one big fail so users with Home Win edition are probably disqualified...

I am using Creo Parametric Release 6.0 and Datecode6.0.4.0We have a business configuration and Winchill as PLM (PDM). In our configuration we point to our libraries (our libraries are on windchill). We have, for example, libraries for our drawing template. But when I create a new drawing care don't reach the libraries we ask in the configuration, we reach the standard PTC libraries.This issue starts one day with no explication, I'm the only user who has this issue and we tried some re-install and install on an other computer but nothing change.

Creo View is displaying a narrow font when viewing a drawing that was exported as CGM format.The native dwg from Creo Parametric and Catia displays the font correctly before exporting as CGM. Is there a setting in Creo View that converts or shows the correct/native font when viewing the drawing?   

Hello, What would be the best way to get the inheritance part number into a drawing.  I am using creo with windchill My scenario is that i would like to be able to refer to this in a drawing automatically, i have been trying to see if there was a method with the parameters but when i create the inheritance feature, the file name is the only thing i can refer to, which the file name and PN do not always match. 

I am using Creo Parametric Release 6.0 and Datecode6.0.3.0Creo exit just after launching.Here are the errors that I facedstd.err file generated with below errorpm_is_portmapper_port_busy: bind failed, error = 10013pm_is_portmapper_port_busy: bind failed, error = 10013Recently Changed OS Version from Windows 7.0 to Windows 10.

hiiii,   I am new user of creo and i have one problem.   As shown in Photos i have one plate and one pipe part. i assemble those two parts.   how can i insert extrude with cut feature automatically when i assembled the pipe part to the plate. I knew insert the feature by UDF.   Thanks in advace !!!    

I am using Creo Parametric Release 6.0 and Datecode6.0.3.0Creo not able to start. give fatal error.Here are the errors that I facedFatal error encountered. A traceback has been written to U:/********/traceback.logPlease send it to Technical Support.

When I use Creo Distributed Batch to import STEP files I get the following error: "[-16] Error: Wrong input data format. Model Import failed" The file came from Catia V6 in AP203 with extensions v1 format. It is an assembly and can be imported manually into Creo Parametric 8.0.6.0 with no problem. I note that the ttd file in Creo Batch says "STEP 3D Import of Parts". Does that mean you cannot import assemblies in this way? I have a few hundred of these to import, so it will be very painful to do it manually. Does anyone have any thoughts as to how to import these in bulk?

I've recently encountered an irritating intermittent / delayed problem using Simulate.At some stage during a session, after several iterations, the Results window suddenly refuses to open.  The button, either in the Ribbon or within the Analyses and Studies window, just stops doing anything (although I haven't tried closing Simulate and using the Simulate Results button directly from Creo Parametric).  The only solution I've found is to close and restart Creo (which is obviously a nuisance).Has anyone else encountered this?Creo 2.0 M120, running with Windchill 10.1 M040, network installation.

I have a simple text file that I've been importing to every model in my workspace for a while now.My titleblocks are integrated to read these parameters and automatically fill everything out.This is working great. BUT... Now the engineer wants to change the checker & checker date parameters on everything. Is there any way to import this txt file into every part/assy into every file in my workspace?Instead of opening every part/assy and importing the txt file manually?I really don't want to do this 350+ times. It's actually a .xml, but it opens in notepad. Same as Configs. 

Greetings.  I am somewhat able to create a repeat region table containing all of the information I need. However there are certain issues which I cant seem to get past.  Problem 1 : I have a column for cable length, and I populated the top column with the following report string: &mbr.connprm.pin.run.len[.0]. 2 wires in particular is a part of a cable feature, one is displaying the proper length, one of which is not displaying anything. I did not manually assign any manual lengths, so I am now sure how to fix this issue, any ideas?  Problem 2: I have a different column, displaying length again, with the following report string: &harn.run.len[.0]. I have 3 wires as a part of a cable feature, each with varying lengths. In the table, only the longest length of wire is being displayed for all three wires. I am assuming that because this is a single cable, it is giving me the longest length in the wires, but whether I am right or not is what I was