Creo+ and Creo Parametric

After I complete my model and create tool path with Creo Manufacturing file, OR while creating CL file, I want to scale my model by 0.5 (due to using same program in different machine), but only in X-value (Diameter) and not in Z-value (height)!   There is a scaling option given, but it scale the CL file both in X and Z direction by 0.5, which is not solving my problems. Can someone help me, if there is a way out here?

I am using Creo Parametric - Release 3.0 (connected) 3.0 M100When exporting a drw to pdf file, some of the lines appears thick on the pdf.

Why is my screw not displayed in the hole? It looks like the drilling has a higher priority. Can someone help me?

Is this possbile? I have a single part file with 20 bodies within and would like to view it exploded like you can in a standard assembly

  I created a BOM with two configurations (two different models) and have a few issues I'm looking to find solutions for.    Right now the QTY column is blank where no quantity exists. When i try to Repeat Region>Dash Index, I get the message: "Select a text which contains rpt.index or rpt.qty." followed by "Not a valid report symbol to be dashed. Select again." after trying to select the blank cell to be "-". When I switch symbols, i still see rpt.qty in this column, but as I click on it this switches to qty.m560r0. How can I get around this? After adding the new config qty column, all parts for the -2 config are now at the end of my BOM, effectively breaking my initial part number structure. Can i get them back into their initial place without using fix index? Adding a new -2 config column breaks my relation the removes a specified cage code. It still removes the specified cage code, but also removes a few others that aren't specified while keeping a few. Seems a b

I am using Creo Parametric - Release 7.0 (connected) 7.0 7.0.4.0Hello,in Creo2 when saving as Shrinkwrap, it included automatically the default datums.in Creo7 it does not, why?How to fix it?

I have a  part with two bodies and multiple combined states.  I want to control visibility of one body by switching to a specific combined state.  I have finally mangaed to do that via layers and layer states within the part. Any ideas how this might work for an assembly?  I assembly the part with the two bodies, but have not found a way to make a body of the component persistently invisible. Any ideas?

Hello,   I am controlling a component pattern in an assembly in Pro Program with a statement such as - If Pattern_table:fid_2250="4_ejector_pins"   When the option of not having those components in the assembly is created in relations If Pattern_table:fid_2250="no_ejector_pins", the cut features made by those components in additional components in the assembly fail due to the components not being there.   Can these surface cuts in the assembly parts be suppressed by a statement in relations or pro program when the component pattern is removed?   thank you.  

Post topics about Generative Design here.

Our users are working with Creo ParametricWe've changed our licence server but we're not able to retrieve the new license file including the parametric functions.We generate a file with "MECSTRUCENG_STSIM" and "MECSTRUCUI_STSIM", but that don't allow us to use parametrics functionnalities.We may be lost with the new naming model.Can you please help us, how can we retrieve a new licence file for a single flexlm server tat will work ?

Hi Guys, Anyone else having issues with Creo 7 and 3d section views?   I want to create a section view in my 3d part to measure some the thickness of my part.    Im making an offset section, as I want to create a sketch of where it is.    It shows fine in the preview.     But once I accept it, I get this crap. Its like it doesnt hide my sketched curve, and trys to create a solid from it.     Ive been using Creo since the Wildfire days, and it seems Creo 7 is SO buggy.    Is there a config setting to stop this from happening? I NEED to have this right on the center of some geometry to get a good measurement....so moving it slightly offset till it works is not a good solution.   Jay            

To my surprise I found an item type of GTOL, having trouble figuring out what to set gtol to...   Set gtols = hole.ListSubItems(EpfcModelItemType.EpfcITEM_GTOL)        Dim gtol as Ipfc????   Any help would be greatly appreciated!

Hello Everyone! We recently upgraded to Creo 6 and i have noticed different behavior regarding display of datum curve features.  I'm looking for the config option to enable the "show datum curve features" by default, anyone know the answer?  

I am using Creo Parametric 4.0 M130I need help with Layer Management. How to capture all layers being used by users into 1 layer configuration to be used by everyone.

Hello,   i have a problem. In my drawing, a component that I added as a STEP file from an external source is displayed with all of its edges. This error only occurs with the parts that I add externally. How can I set that only the visible edges are displayed for these components? Attached you will find a picture.   Thanks!

I am using Creo Parametric 5.0 5.0.2.0Creo only works on the left display. If we move the window to the right display the entire application freezes and we are forced to use task manager to force quit the application. This happens when using Creo Paramedic, ModelCheck, and Creo SimulateWe tested and we can move the app in minimized mode only. If we move it as a window or full screen it freezes.

I currently have a cabling assembly with multiple harness parts. Is there a way to automatically route the harness so that they do not interfere with each other. I have tried to   Thanks   Steve

I am using Creo Simulate N/A N/A1.) What is the difference between "Creo simulate" and "Creo Simulation Live"?2.) What are the limits for calculation of these two versions?3.) How many is the cost difference between both versions?

I am using Creo Parametric 4.0 M040Dear Support,We are using the PTC Creo 4.0 version.We are not able to use the Creo modeling due to fatal error..We could not start the modeling even.please help asap.

I am using Creo Parametric 2.0 F001Tanzeer kazmiPhone:8668 2028 49Email:tanzeer.kazmi@zamilac.comIssue: Creo getting crashes after getting the Fatal error message log, Auto traceback info

I am using Creo Parametric 3.0 M110Server WS の Windows の更新後に、Flexlm server for PTC が立ち上がらなくなった。・2021-05ｘ64 ベースシステム用 Windows 10 Version 2004 更新プログラム (KB4023057)・2021-02 .NET Framework 3.5 及び 4.8 の累積的な更新プログラム (x64 向け Windows 10 Ver 2004用）（KB4601050)Here are the errors that I faced ローカルコンピュータ上のFlexlm server for PTC は起動して停止しました。サービスの中には、他のサービスやプログラムで使用されていない場合は自動的に停止するものがあります。

I am trying to model a nose cone/end surface with G3 surface conditions (as shown in the image below/file of model attached). I am using PTC Creo 7.0/Style.   I'm trying to achieve a G3 surface condition on all 3 domed sides and a normal constraint around the bottom perimeter.    So far I am only able to achieve a G3 condition on the central curve/surface and a normal condition around the bottom perimeter. When I try to increase the two surface conditions either side of the central plane from a G2 to G3, I get the following error message:   "The cross curves are not connected with the same continuity as the connection"   I'm not sure what I am missing here? It would be great if you guys could take a look and tell me what I am missing? 

I have the following relation in my relations for a BOM that simply removes the specified cage code:     IF exists("asm_mbr_cagecode") IF asm_mbr_cagecode == "12345" my_cagecode = " " ELSE my_cagecode = asm_mbr_cagecode ENDIF ENDIF      Which has worked as intended, EXCEPT I am now noticing that there are a few parts in my BOM that are pulling the incorrect cage code from another unrelated part. Without the relation, I don't have this issue. Not sure where this issues may be coming from.

Bonjour, J'ai besoin de savoir comment faire pour ajouter un paramètre dans un dessin dans un tableau qui est lier aux instances d'une famille de pièces.   La dernière colonne devrais varier mais elle réfère toujours uniquement a la pièce générique.  

I am using Creo Parametric - Release 2.0 (connected) 2.0 M150HI, Could you give us best practices for configuration of the nvidia control panel. Our computers are running parametric 2.0 M250 and 5.0.6.0 and simulate Our graphic cards are Quadro RTX 4000 (on Dell Precision 3640 Tower) Thanks a lot. François