Creo+ and Creo Parametric

How can i make my formats save in the template, i always make all the work, save the template but when i go open, dont have any format in there, i dunno what to do anymore.i already save as template as drw, notting works, i think i am broke thats why i have so many problems in the creo.funny that one of them saved as i wanted  

We recently upgraded from Creo 4.0 to Creo 9.0.  When I open older drawings that have section views or create new section views, I now see these big "X"s all over the drawing.  How do I get rid of them?

Hello. Please tell me how to move the second dimension line below the angular dimension line as on attached picture? In a usual linear dimension, it is enough to move the text to a new line in "Dimension Text" and it wraps under the line, but in angular size this does not work.

I am using Creo Parametric Release 11.0 and Datecode11.0.2.0unable to distinguish between thickneess of object line and extension line on drawing in creo parametric 11.0

Hello. I've been using CREO (first 7 now 10) for less than a year. I pick through stuff to get my job done. The training I received was = none. So, I want to show dual dimensions in the Measure results. Right now, set to English Inch. I want also Metric millimeter as well. I click on the "open options dialog box" and only see option for one unit. Does CREO 10 allow for multiple units displayed during Measure command. I searched System Options and even the search bar. I didn't find anything. That is why I'm here. Please note I am not asking for dual dimensions for drawings. I know this is an option. Just Measure tool results display. I hate having to use calculator for every measurement. Thanks

Dear Creo experts I would like to apply the isogrid, or better hexagonal net, on the outer side of surface in attached file. The quilt is unflattenable. I have study the examples above, the trajectory rib method, but no way, not works properly on the open side surface. I have just no idea how to do that. Thanks for support. Rosta  

I am using Creo Parametric Release 4.0 and DatecodeM080Interference check feature is not able to find out interference between the two items.

Hi Creo Community,    I have converted the creo drawing file units from inch to mm. upon doing so the fonts of all the text got very minute and smaller. I have fixed it by updating the text values to mm equivalent of inch.   However still in diameter and radius dimensions the horizontal leader line is missing. See attached image. I have highlighted in red.   I would appreciate your help with your suggestion on how I could show it back? Thanks so much!  

Hi, I'm using Creo 10 and i'm trying to export the model to 3d PDF using VB COM API in C#.i tried below 2 options and getting exceptions.      var instructions = new CCpfcPDFExportInstructions().Create(); model.Export(pdfFilePath,(IpfcExportInstructions) instructions); model.ExportIntf3D(pdfFilePath, (int)EpfcExportType.EpfcEXPORT_PDF,null);      can you please provide some code sample to guide me through?

I am working on some big drawings with several sheets.  As I work along - the drawing elements keep changing, and it is making me crazy. For instance, the note boxes resize on their own (going to multiple lines) when I am moving an unrelated view.The dimension lines keep jumping around (set them all perfect, then when I come back to the page they are extending to never-never land).  (For that matter, some of the dims move too.)Views move, and sometimes overlap.  I make the page perfect, then go to another sheet, but when I come back, views have moved.Extra leaders suddenly appear from notes pointing to nothing.I keep getting these weird errors saying it can't regenerate some features - but in the model space and assembly space, they regenerate fine.Sometimes the dimensions and notes look correct with respect to each other, but the model has moved, so the dims and notes are going to nothing.  It's like a refresh error, but it won't refresh back to where it belon

In Creo 11 there is a new mapkeys.pro file, which is split from config.pro file. How to set up an alternative folder for mapkeys.pro file. Under Help Center there is an information which says, there is a possibility to set customized path?  

This is my first time dealing with locked module licenses so I am looking for confirmation that this is true.   If I call a T2 [PROE_DesignAdv] floating license in my psf and I have a locked module license then my understanding is that the psf will look like this:   ENV=CREOPMA_FEATURE_NAME=PROE_DesignAdv (386)   Where 386 is the locked module featurename (in this case Generative Topology Optimization). If I have more than one locked module then there is just a space between then (108 386) for piping and topology for instance.   Do I have this right?

Hi, I'm a new users of Creo 11.0.2.0I have set in my configuration (view the attachments) the option "Automatically Scaling a Sketch" but it's not work. Are there some other configuration to able or disable? Thank you 

Hello Has enypone  have some idea how to made this topic.I woul like to export  some of parmeters to excel thane make new  value or imput new value.Then I would lik to import back to part.For boom table. Rehgards 

Recently downloaded creo 11 and have found that performance very slow compared to creo 10. Nothing in my set up has changed, hardware or software.The on screen colours are poor. I did have the black screen and implementing win32_gdi improved that but when working with assemblies and moving/turning the model underlying redrawing happens and I've looked for an option that would cancel that but no luck so far - as I only need the 3D model. When using text on drawings the screen just flickers. I've tried open_gl too in the graphics (config.pro) but nothing improves performance.I've made sure all the latest drivers are installed too.  Any ideas?Role back to creo 10?

Adding cosmetic threads to a shaft or hole in a model did not give expected results.  I would have expected a surface texture map or some feature easily seen.  Is there a way to display these threads?

Hi,I try to build a mapkey that automatically select the CS feature above my last copygeometry feature.To do this I have a first mapkey "--lf" that select the last feature in model tree and a second mapkey that search for parent CS of my copy geometry. but It doesn't work. If I replace~ Select `selspecdlg0` `RuleTypes` 1 `ParChild`;%--lf;\by~ Select `main_dlg_cur` `PHTLeft.AssyTree` 1 `T3 621`;\than it works but reapeating the mapkey later in model wont give the right CS as it will always pick `T3 621` In the end I would use a similar mapkey to select the last 3 features in model tree and group Cheers, Robert mapkey --lf @MAPKEY_NAME--lf select latest feature;@MAPKEY_LABEL--lf select latest feature;\ mapkey(continued) ~ Command `ProCmdMdlTreeSearch` ;\ mapkey(continued) ~ Select `selspecdlg0` `SelOptionRadio` 1 `Feature`;\ mapkey(continued) ~ Select `selspecdlg0` `LookByOptionMenu` 1 `Feature`;\ mapkey(continued) ~ Select `selspecdlg0` `RuleTab` 1 `Attributes`;\ map

Hi,Is there a good, current source for downloading Creo Material files? I am looking for commonly used metals and plastics. It seems crazy that every individual or organization has to create their own material library. I'm assuming this has been done many times, but cannot find a definitive source online. -Scott

OK, so, how do you hide some quilts, and show others? I have a part that has tapped holes top & bottom.  When I make my top view, I want all the stuff hidden below that surface.  Easy enough..   'No Hidden' and 'hidden line removal for quilts' = Yes. Sure enough, all my hidden lines are not shown, nor my hidden holes.  BUT: my shown holes, hole on the top of the part / in the view, now have their quilts hidden.  (SO they are just thru holes, no pretty pink circle to show / denote threads) OK..  'hidden line removal for quilts' = No. Now I see the quilts for the threads in my tapped holes.  Problem is now I see ALL my outer circle to denote threads on hidden holes.  (So I see all the threaded portions, but no 'hidden holes' or other features) SO, how do you hide a quilt on a tapped hole, that is a hidden feature in the chosen view?  And have the quilts to denote threads appear on shown holes?

Hello everyone,I am experiencing an issue with a specific ModelCHECK verification in sheet metal parts.I have configured the thickness validation in ModelCHECK to report an error if it detects a value in the SMT_THICKNESS parameter that differs from those defined in the thick.txt file.This issue only occurs in files containing the Flat Pattern instance. Since we have many legacy files in this condition, the problem has become quite frequent.As a temporary workaround, I have been making minor changes to the generic file and updating the Flat Pattern by verifying the family table. However, there are cases where I need to edit the instance itself, and in such cases, ModelCHECK does not perform the validation as expected.I have attached an image that illustrates this issue.Could anyone assist me or suggest a possible solution?  I'm using CREO 9.0.9.0 release. Thank you.

-------------------------------------------------The trace creation timestamp is: 周二 11月 05 20:29:14 24The executable build timestamp is: 周五 2月 22 16:14:56 19The datecode is: 2019010The pro machine type is: x86e_win64The process ID is: 12088The traceback type is : CRASHThe logger exit status is: 01003The Trail is: trail.txt.33The release is: 6.0The product version is: 6.0.0.0The product title is: Creo Parametric-------------------------------------------------Exception EXCEPTION_NONCONTINUABLE_EXCEPTION has occurred in the thread 8572. Main Thread 8572=====================   Spoiler (Highlight to read) 0x00007FF8D7972576 NULL (NULL:0) (ntdll:0x00007FF8D7870000) ( 0x0, 0xa2dabb20, 0xa2dac500, 0x1 )0x00007FF8D792ABFC NULL (NULL:0) (ntdll:0x00007FF8D7870000) ( 0x0, 0xa2dac3a0, 0x0, 0xa2dabd30 )0x00007FF8D78C22A7 NULL (NULL:0) (ntdll:0x00007FF8D7870000) ( 0x70, 0xa2dac6b0, 0x659876d0, 0xa2dac5b9 )0x00007FF8D505B699 NULL (NULL:0) (KERNELBASE:0x00007FF8D5020000) ( 0xa2dac628, 0x9bd6b588

The note for a cosmetic metric thread (in our Creo5) look goofy when they specify an M16.000 thread with a 0.500 pitch. I have had no success with the various "LEAD TRAIL ZEROS" detail options. These notes don't seem to have the same functionality as our regular hole notes (for which we have created our own versions) Does anyone know of a solution for this? Thanks, Vince  

Hello Community, I got a very weird licensing issue.I have 8 Creo View MCAD licenses and I want 6 of them to be accessible only to 6 named users. So I modified the ptc.opt file like this on my license server :  GROUPCASEINSENSITIVEGROUP CVMCAD username1 username2 username3 username4 username5 username6 RESERVE 6 PVMCADPRO GROUP CVMCADRESERVE 6 PVPRO GROUP CVMCAD Problem is : for one specific laptop, it is impossible to open Creo View MCAD if the user is in the CVMCAD group :- Creo View Lite = OK- Creo View MCAD (username1, in the CVMCAD group) = NOK- Creo View MCAD (username2, in the CVMCAD group) = NOK- Creo View MCAD (username7, not in the CVMCAD group) = OK The same test has been done on another laptop (but the exact same type), but with different results :- Creo View Lite = OK- Creo View MCAD (username1, in the CVMCAD group) = OK- Creo View MCAD (username2, in the CVMCAD group) = OK- Creo View MCAD (username7, not in the CVMCAD group) = OK I don't

Hi community, I am trying to measure the maximum and minimum stress at a point for a specified coordinate system (shell model). In other words - I am trying to asses the bending contribution in a plate by measuring the maximum stress (on for example the top of the plate) and the corresponding minimum stress (on the bottom of the plate). Frustratingly, you can not measure maximum and minimum stress directly at a point, so I have set the spatial evaluation to "Near Point"  and specified a small radius of 1[mm]. This measure is applied to multiple points in a pattern as shown in the attached screenshot. Multiple measures can be applied to the same point.  The parts containing these measures form part of a larger assembly/sub assemblies. Before adding the measures, analyses run past the "Begin Engine Bookkeeping" step in the run log in a few seconds. After adding the measures, the analyses is hanging on this step - it hangs indefinitely and does not provided a

Hello,we are getting this error PRO_TK_CANT_MODIFY (-48) trying to assign a parameter value or creating a new parameter. I found this https://www.ptc.com/en/support/article/CS419066: from Creo 10.0 on, object are requested to be in checkout state to modify parameters, when used with Windchill.Do you know if there is any options to workaround this?As developers, we need to revise and complicate our logic flow to add a checkout to our customization routine. That could be expensive and time-consuming.Thanks a lot