Creo Elements Direct

Test 11

Test 10

Test 9

Test 8

Test 6

Please us the AR Design Share Label for AR Design Content.

Test 4

Please use the 3D Access label for 3D Access content.

Test 2

Hello everyone Could someone give me instruction how to add frame  for inspection dimension in Creo Direct Modeling/Annotation 20.0. The only possibility I found is to add balloon frame to dimension, but result is not nice and is not work for a single number see picture 1, but wish to have it like a std one see picture 2. 

dear sir/madam, i have a problem when i install creo elements/direct modeling. I install trial version before, but now i cant install with the liscense i buy. it alway use license trial.   PLS, help me. thank you very much! 

Dear Sir/ Madam.This is  license PTC Creo Elements/Model Manager. i dont know why cant fill right hostname. Plz, help me support this problem. Thank you very much!             

Dear Sir/ Madam.this is error license PTC Creo Elements/Direct Drafting work not good, plz help me with informations below.Last time we install Creo Elements/Direct Drafting version: 18 and managed license version 20.0 in win 7 - 32 bit this license and software working good. about 30 day Customer update win 10 -64 bit and install Creo Elements/Direct Drafting version: 18 and managed license version 20.0, some times license manager working some time it not working (we have many error). Plz help me support this problem.

How can I fill in a Drawing_2d attribute with an existing Masterdata attribute automatically when a new drawing is created?

I have recently installed Creo Elements / Direct Modelling Express and have a couple of errors on startup (refer attached). Can someone please shed some light on the issues. Thanks in advance!   

Here's a video showing how to automatically add Dynamic Relations while positioning parts.     (view in My Videos)

Hello!   We have a small, but really irritating problem with our new Creo Modeling 20.1 installation - sometimes when we start with the program the tick in the Viewport settings for "Preselection Mode" is not there and must be manually activated. Any idea why this could be happening? Is there some kind of a keyboard button combination, which the engineers push unknowingly, which can cause that kind of behavior? Thanks in advance!

Hi~   I want to know how to set active other sheet.  Anybody know it?

Hello Experts,   I have created a master drawing and master model, from which i generate individual drawings for few parts.The parts are long, so that, I've added Broken view in the drawing with multiple breaks. Now, there are few drawings, where I need to remove couple of the break points form the broken view due to some reason. This can be manually done by removing from view properties. But i would like to know if there is some automatic way to remove the required break point  upon generating the drawing. Can this be done by providing a condition in drawing program or use mapkey etc?   For example: In the attachment, drawing generated for Part A from the master drawing has multiple breaks. But when drawing is generated for Part B from the same master drawing, the highlighted break is not required. Any help would be really appreciated.   Thanks in advance

I have a model in Creo Direct express and need this to be saved as a Step file. I already contacted PTC to upgrade but I expect that the COVID has closed down communication. I want to upgrade to Creo 7 but don't get any reaction/ response from PTC.  Can anybody help me out in the meantime? I am in urgent need to get my Bundle in a Step file.  It would be highly appreciated. You can send me a message or an email so that I can share the model. My mail is info@absolar-africa.com Greetings Vincent. 

Hello everyone,   I am trying to find where I can learn how to write a "repeatable" hot key. For some testing purposes I need to create one attribute in some 3D Models. I have of course no problem to create it manually 🙂 However, in order to check in the test assembly into a test server, I need to repeat it for all the components and sub assemblies and there are about 2000 of them.   I am trying to learn (unless someone talented and generous enough write the code in the post :)) how to create a hotkey or script that will go to all the prt and asm files in the session and create the attribute   ATTRIBUTE1, type string, value = xxxxx and it is a designated attribute.   Thanks a lot Best regards  

Hi, how can I improve the quality of models in modeling direct 19? where are the graphics settings of the application?   can I act directly on the Nvidia control panel?   what settings do your recommend?  

It will be very appreciate in new version after 20.2 to have possibilty to chose a color or a tag for each part in part list.

It will be very appreciate in new version after 20.2 to have possibilty to move 3D windows to auxialiary screens also.

Hello,   I know that my following query may not have a solution and I may be stuck doing everything over again. However, I am hoping some of you might have some insight on any tricks I can use to make my life easier.   What I am Trying to do: I have .mi files that are finished and ready to be sent to a manufacturer. However, I want to attach the corresponding 3D part to the .mi file so that an external person can reference the 3D geometry of the part without opening another file.   This essentially makes it function like a .BDL file where in one file I can access the part and the annotated drawing.   (Originally was only going to send .mi files...looking back I should have just saved everything as a .bdl file, but I no longer can)   Questions: 1) Is this possible? Can I import the corresponding part to the opened .mi file, have it sync up so that the 2D views correspond with a 3D view and save it as a BDL file? 2) If so, how do I sync up the 2D views with the 3