Mathcad

The software is not installing. It is showing the following error in the installation: "Some applications failed or cancelled. Click Information of failed application for details. " ; "Installation failed, refer to the installation log file for more information. You can Restart the application installs or click Exit to close the installer."; How to install? Translated with Google Translate Translated by Corina Ionescu, Dec 27th 2021   O software não está instalando. Está apresentando o seguinte erro na instalação: "Some applications failed or cancelled. Click Information of failed application for details. " ; "Installation failed, refer to the instalation log file for more information. You can Restart the failed application installs or click Exit to close the installer.";Como fazer para instalar?

Hi Folks,   I took a few minutes to visit the Smath Studio web site.  It seems to have come to life again and there is a new version available.  It's still pretty basic (think MCAD 2 or 3), but it is encouraging to see new activity.  Hopefully, it will achieve critical mass.   Mark    

The mathcad series commands generated an order 6 series. Is it possible to expand the equation to a higher rate? James

 Hi,I'm working on a quite big automation tool.I've come to a point where I'm making a function in one variable out of simple conditional statements with functions in more variables.When I try to let Mathcad show me it's symbolic answer, it gives me an error:"Unable to evaluate a conditional expression"I checked above that this is not the case.How can I solve this?Thanks in advance!Arne

Luc

https://rosettacode.org/wiki/Partial_function_application   Partial function application, often abbreviated to just partial application (PA), is the ability to take a function of many parameters and apply arguments to some of the parameters to create a new function that needs only the application of the remaining arguments to produce the equivalent of applying all arguments to the original function.   The attached worksheets (M15 and Prime 7) are potential staring points for entries for a Mathcad section within the Rosetta Code webpage. I created them some time ago, but ran out of licence before I could finish them off.   Only M15 is capable of built-in partial application.   Mathcad Prime had PA in its initial versions but it was removed.   The attached worksheet uses an intermediary function to generate a closure that acts like partial application.  However, a number of the listed programming language have taken this route, so it is accept

Hello, I am trying to use this w(k) in my transfer function, but it doesn't work.I can use w(k) separately.Do you have any idea how can I do this? 

How to get activation key for Mathcad 14 installation for a personal disk copy of the software.

Whenever I am using units the answer changes why does it keep happening?

i use the same units and still tell me that units are not compatible.

Hello everyone i stuck on some basic equation i think. This is my equation, where Im looking for alpha1 and alpha6, all other date is given.Data: Please can anyone explain me how i should define a1 and a6 in solver block? what im doing wrong? values which im looking for should be similar to this one on the drawing below, right? but answers are totally different.This is result of my solution but its totally wrongIn attachment im sending mathcad file, please help me and also i apologize for my bad english :)Have a nice day

Can we have gridlines to log scale in Chart component? As I change under gridlines it is not having any effect. Can somebody please help  

Prime 7I am trying to calculate volume of a cone as a function, in steps of 0.3 meters.I'm not sure what I'm doing wrong.can someone enlighten me? thanks in advance

Hi I am student and some of my files are corrupted.I have 2 mcdx files where there is an error with precision in some calculations.when the files where saved, a critical error had occurred setting precision to "" (ergo nothing) I remember ignoring it and thinking nothing of it.I have tried a fix where you turn the files into .zip and alter the worksheet file manually, but when I try to open it after I have repacked it and changed it back to mcdx, it just doesn't open. if anyone has a fix, that be awesomethanks in advance. regards Karsten

I like to get a quote for a new license.

Here is a selection of functions for dates, calendars, and times. Also included is a calendar component that allows a date to be selected by the user. The scripted components were all written by me, but the additional functions at the end of the worksheet were not. In fact, I don't know who did write some of them, but if the author of those functions, or someone who knows who the author is, reads this then please let me know who did write them so I can credit them correctly.Jun 09 2015: Added a worksheet for Mathcad Prime. This includes only the limited set of functions not based on scripted components.

I'm trying to solve this system of equations symbolically (ie I want the constants Ci to be in terms of all the symbols. My professor used Mathcad 15 which seems to work differently. As seen in the picture below. Can this be done on mathcad 7? 

Hi All, I work for a design consultancy company and we are planning a business wide trial of Mathcad Prime 7 in the new year.As part of this I am attempting to automate the deployment of the software as we would rather not visit every computer and install it manually however, I am struggling to get it to install when running a .BAT file with the following script in it;setup.exe -xml "mathcad.p.xml"I have followed the instructions on page 46 onwards from the below link however, I am struggling to get this to automate the installation of PTC Mathcad.https://www.hearne.software/getattachment/42f0fae3-2349-45ea-9124-8275cd280b8d/PTC-Mathcad7-installation-guide.aspxWould be really appreciative is anyone could assist?

Hello guys,I am new to Mathcad, learning and calculating my masters thesis and recently came to a problem.There are some formulas in my work (timber structural engineering), which were evaluated by an experiment and units in formula - result are not the same.My question is, if I can supress Mathcad base unit system and force to calculate just with numbers as on calculator?Here is a screenshot with my problem, I understand the program does not know what to do with the exponent of "d", just would like to know, if there is a way to go around this.I tried to add constants to the formula to make the wierd 1/m^(13/10) disappear, but with no result.Could someone give me a hint? Thank you for helpBest regardsStepan Mudrak   

Do you know that trig functions have color QR codes - see picture and Mathcad files - 15 and Prime.

Is there a way to set up an auto save of the Prime 7 file while working on it, to prevent loss of work  in the event of a system computer problem.  This would aid in not having to re-create lost work.

HiI have attached 2 x CSV files and Mathcad Prime. I have isues on Page 5 of 9 calculation mean and SDThanks.

Which operator can I use in the equations for D, E, and F that can evaluate them the same way, except more efficient than how I have it shown (i.e. takes up less space on the page than both Methods)? (Yes, it took a long time to type them out. No, I'm not proud of my work 😅).I know I can simply define A, B, and C with more elements like I've shown in Method 2 to make D and E cleaner. But that still leaves the same expression for F in both Methods. The order of the elements in matrices D, E, or F isn't important for my application of this (it's for wind loading on roof parapets).Thank you in advance, and my apologies if this question has already been asked, or if it's excessively elementary! My grasp of matrices/vectors has always been poor, so I didn't even know what to search for. I tried a few key words, but alas, here we are.I'm using Prime 7.0 if that's important.

Dear colleagues! Please help me with the difficulties I am having trying to repeat a very important example step by step.I tried to do as much as possible myself.Nevertheless, a number of questions turned out to be impossible for me to handle.Since, apart from the context and previous calculations, the essence of the questions will not be clear, I am attaching the original MathCAD file, the PDF example file, as well as a .xls file for the calculations.All questions are highlighted in red in the MathCAD file with references to the example’s pages.I will be extremely grateful to everyone for any comments/advice/hints. P.S. I’ve tried to contact the author of this work in different ways, but there was no answer.

hi, I've forgotten how to work with data in classic mathcad. I have the questions in the file attached along with the data file. These are the three questions, for the sake of the post: 1) how to get x,y data into a function2) how to assign units to the data3) how to curve fit the data The questions would apply to any x,y data set. This happens to be a fan pq curve. Thanks, Anthony