PLM

I have a requirement where if I add a specific type of WTPart to existing Part in Part structure using OOTB actions "add existing"/"add new", the Parent part to which I want to add child part should not iterate.  For this I have implemented listener and catch the PRE_STORE event and could found the target object which is WTPartUsageLink. From this I got both  roleA and roleB objects, and then I undo check out the roleA (parent) and then created an usagelink and finally tried to save it using PersistenceHelper.manager.insert() APIHere the issue is probably in back end after PRE_STORE , there is PRE_CHECKIN event that might be calling so I am getting exception that unable to find the checked-out copy. Here there will not be any working copy because I undo check out it using WorkInHelper.. API. My overall intension is that parent part should not iterate but need to create usagelink by adding a  child part (of specific type). Note: This I need only when I am trying

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.0Good Morning, I am trying to see if we can find out what Office products we are needing to work with Windchill PDMLink. Can you provide us with the required Office 2019 applications? Thank you.

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020 CPS30After checkin via stand alone Edge browser a promotion request window doesn't popup automatically.

Version: Windchill 13.0 Use Case: How to check users active on each node in a windchill cluster environmentDescription: How to check users active on each node in a windchill cluster environment

Version: Windchill 12.1 Use Case: Unable to see Mass Change Icon on the resulting objects table of a Change Notice.Description: Unable to see Mass Change Icon on the resulting objects table of a Change Notice.

Hello everybody, I have a very short question about generating a new attribute including a traffic light. I have created a new integer attribute with the following formula behind:   (state.state == “CANCELLED”) ? 0 : (state.state == “INWORK”) ? 1 : (state.state == “RELEASED”) ? 2 : 3   But when I try to save the changes I get the following warning: "Value entered for Formula is invalid." What am I doing wrong here? Many thanks!      

Version: Windchill 12.0 Use Case: find list of registered user in windchill systemDescription: hello all, i tried to find windchill registered users list from SQL but it has given me over 5000+ entries which is not correct. looking into our security group we have only 832 users in the system. is there any way to find the list of users in the windchill system. thanks,sandeep 

Version: Windchill 12.1 Use Case: I am migrating content from 1 system to another and am trying to make it as efficient as possible and avoid exporting documents when I don't need to.Description: I am identifying documents that have been updated by looking at updateStamp and modifyStamp. If a user checks out a document and checks it back in, is there any way to identify if the content of the document changed, or it was just a metadata change event? I am trying to avoid unnecessarily exporting content if it has not changed.

Hello everyone, Our IT department is shutting down all eVPN access due to cybersecurity concerns. Until now, this was the method we used to connect external CAD designers (for co-design on projects or subcontracting) to our internal Windchill database—either via ProjectLink or directly through PDMLink, depending on the use case. Is anyone else facing a similar issue? Do you have any suggestions or alternative solutions? Here’s what we’ve tried so far:Virtual Machine with Creo installed: Unfortunately, the performance was too poor—too slow to be usable.Creo+: We considered this option, but compatibility with our current Windchill setup is problematic. Additionally, the session-sharing workflow doesn’t align well with our needs.Secondary Windchill database with package exchange: This could work, but it’s too cumbersome for users, adds infrastructure costs, and increases our internal workload.We’re looking for a secure, efficient, and user-friendly way to allow externa

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.51. Windchill 13.0.2.5 extension manager garbled characters in Chinese environment, Windchill 13.0.2.2 extension manager is displayed normally; Pls where is the extension manager resouce file2.How to remove the menu because we found that customizing this menu does not work, how to remove the add menu in the site navigation?

Hi All, I am trying to build a Part Structure Iterator module that recursively iterates a Part structures and returns all the parts under them using the combination PartBuilder and Navigation Criteria. I found this quicker compared to WTPartHelper.service.getUsesWTParts. Now I want to customize it further by adding methods that return only leaf nodes(parts that do not have any children) and parts of a specific type. Anybody got any simpler solution? like playing with Navigation criteria?

Hi teamI tried 'Change Monitor' and getWindchill JSP Exception Nested exception is: java.lang.NullPointerException Change Monitor is available in Browse->recent products->some-product->Change Monitoror similarly by libraryor under Changes (between Recent Programs and Organizations)There are several report templates which seem to be part of the 'out-of-the-box Change Monitor' but they were not enabled. Do they all need to be enabled? Is anything else needed to get this working?thanks -- Rick

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.0We request to share documentation for <SCRIPT LANGUAGE="Windchill">Here are the errors that I facedWe have a requirement to add EC number, EC Name and Priority to any Email sent out based on EC in Email Subject Header.We plan to modify below email templates to include the required details.../Windchill/codebase/templates/workNotification1.GeneralSubject.html2.GeneralSubject_en_GB.html3.GeneralSubject_en_US.htmlWe want to add a condition to include the workflow variables to add above mentioned details only when the workflow context object/primary business Object is of type WTChangeOrder2 . We added variable with below code , it works fine. The required details are added in the email Subject.<SCRIPT LANGUAGE=Windchill> <!-- beginSubject --> </SCRIPT><SCRIPT LANGUAGE=Windchill> <!-- addText text="EC " --> </SCRIPT><SCRIPT LANGUAGE=Windchill> <!-- getProcessVariable var

I am using Windchill Navigate (formerly ThingWorx Navigate) Release 9.6 and Datecode with CPS F000I get these error messages when trying to access the service Part_GET_All in the Thing:ptc-windchill-OData-connector and am unable to use the serviceHere are the errors that I faced"Error occurred: Unable to execute service GetEndpointList on ptc-windchill-OData-connector : Your route exchange has failed. Resource Error [Failed to aggregate all metadatas, 10 were expected, but only 9 received]" and "Error occurred: Unable to execute service GetEndpointDefinition on ptc-windchill-OData-connector : Your route exchange has failed. Service operation failed with status [ - Cannot find type with name: PTC.Workflow.VotingEventAudit]"

Got a strange one. This is impacting production and I know it was working last week. It does not matter which context and I can confirm this that multiple users get same error message when trying to access Change Monitor. When I looked this up, knowledge base articles talk about upgrades and upgraded OOTB change monitor reports. This a system that has been upgraded since 7.0 so its got history.   I have been looking into Problem Reports and building some new Query Builder reports to assist. I check and I did not accidentally touch those OOTB reports, all exist and I can run them successfully from Site Reports. Interesting that when I ran them to test, it now shows upgraded but middle column is modified date which has not changed recently. I know these were working last week. What changed over weekend is DB patching which does appear to have been successful. We added some customizations which needed to have tomcat cache cleared. We've done that often enough for it to be odd that

Source: Windchill 11.1 MO20Target : Windchill 12.1.0 Question --The source system uses windchillDS for authencitcation, as i understand the target system does not support windchillDS , also the taget system is on AWS ,.Then what options we have , shall we migrate it to openDS or to some AWS services , kindly suggest.   

I am using Windchill Aerospace & Defense Release 12.0 and Datecode with CPS 12.0.2.0I was assigned as the Materials and Process Engineer responsible for a CR. When i tired to reassign the M&P Engineer to a team member, it assigned someone else instead. That person has shared that misassignments has occurred multiple times and we believe it may be a technical issue. I would like to reassign correct the Materials and Process Engineer.

Version: Windchill Risk and Reliability 13.0 Subject: License Recognition Issue After PTC Website UI Update Case Description: After installing the newly issued license file, some modules that were previously available are no longer activated. Detailed Description: I was previously using a license that included all modules. However, after the recent change to the license-related UI on the PTC website, the newly issued license no longer recognizes the Prediction, Weibull, and ALT modules, and therefore these modules are not activated.Although the new license file contains entries for the Prediction module, the module does not appear when the program is launched. Suspecting it might be an issue with the FlexLM version, I updated to the latest version and ran the program again. However, the issue remains unresolved. A prompt resolution to this problem would be greatly appreciated. I have attached a screenshot to help illustrate the issue.

I am using Windchill PDMLink Release N/A and Datecode with CPS N/AWhen calling any reporting endpoint using WRS, I get 500 null error message.Example call to a basic report iscurl -X 'GET' \'https://{serverName}/Windchill/servlet/odata/v3/Reporting/Workspcecontextusers?%24count=false' \-H 'accept: application/json'Here are the errors that I facedThe error message I get from the request is{"error":{"code":null,"message":"An unexpected exception occurred during error processing"}}

Version: Windchill 13.0 Use Case: When Launching PSI installer, the Next button is faded.Description: RHEL 9.2Windchill Version 13.0.2.5Java : 17.0.11 or 17.0.15 When we launch the PSI installer, The Next button is faded and i dont see any loggers captured under /tmp.  

Version: Windchill 12.1 Use Case: In the process of implementing additional filestypes for CAD documents, following this specific guide: https://www.ptc.com/en/support/article/CS81396?&as=1Description: The only description I have found for restarting the MethodServers are this following guide: Using MBeans to Stop or Restart Method Servers This, though does not work for maybe numeroes reasonsThere was no MethodServer to connect to Starting a methodServer from the windows menu, gives a new server, but com.ptc does no have any methodServers + the following errors are thrown all the time 

Version: Windchill 13.0 Use Case: Is there a possibility to use publish rules, and for additional type to have solidworks part and assembly attached as an attachment of Creo part and Creo assembly (EPM docs), like we do for a step file or pdf for a drawing?Description: We have collaboration license (for solidworks), and we can export files to .sldprt and .sldasm. But can it be used in publish rules like we are using for step files. Bellow is part of .xml file we are using for publishing step files after check-in of EPMdoc types. <!-- PART --><additional-files name="part_files"><file display-label="STEP" type="step" output-prefix="3d" output-suffix="step" default="true"/></additional-files><!-- ASSEMBLY --><additional-files name="assembly_files"><file display-label="STEP" type="step" output-prefix="3d" output-suffix="stepasm" default="true"/></additional-files> There is 2 articles i found but i wanted to hear opinion of othe

"We need to automatically update the CAD document number in the Windchill database based on the file name.Here are the errors that I faced"We need to automatically update the CAD document number in the Windchill database based on the file name.

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.2windchillDS要转换到openDJ上，根据技术文档操作，不成功，操作步骤如下：1.在windchillDS上删除cnconfiguration,然后导出ldap2.编辑导出的ldap文件，将“objectclass: ptcSubtree”全部替换为“objectclass: organizationRole”，然后保存3.打开OpenDJ，点击New Base DN，新建Base DN 为o=ptc4.单击导入ldap，将修改后的DS ldap导入进来导入成功后，看不到用户列表。SCN：3R2577094

I am using Windchill PDMLink Release 13.1 and Datecode with CPS 13.1.0.1當我上傳文件到文檔主內容或附件中，sorl是否會自動建立索引，使我在高級搜索中能根據其中的內容檢索到關聯的文檔或其他類型的對象example:When I upload a file to a document file main content or attachment, sorl whether it will automatically establish an index, so that I can base my content to search and check to the related documents or other types of objects