PLM

There are various API variations, such as POST, PATCH, and GET, for attachments in WTDocument within the REST APIs in WRS to perform operations on the document. My question is: Can we access the attachments in the drawing located in CADDocument through WTDocument? If so, can we replace the document there, such as a PDF file, with another file? If we can do this, how do we establish this connection?  

WReadE V1.0 – NEW! Windchill+ Readiness Diagnostic Extension The Windchill+ Readiness Diagnostic Extension is a standalone utility that can be used to collect data for the assessment of a Windchill environment and determine readiness of the environment to move to Windchill+. The extension identifies the following details — Windchill version, modules and configuration, and customizations applied to the out-of-the-box Windchill server.On execution, the Windchill+ Readiness Diagnostic Extension generates an output package. This output package is sent to PTC through Windchill Performance Advisor. The mechanism to manually upload the output package is also available on the support portal (Windchill+ Readiness Data Upload).DocumentationWReadE HelpAdditional InformationThe Support portal to manually upload WReadE output package - Windchill+ Readiness Data Upload portalDownloadPTC Software Download page (WReadE available under Windchill PDMLink) Windchill Performance Advisor 4.1&nbsp

Hello together, we worked with ECTR from SAP for many years. It was possible to reload a drawing from SAP via a mapkey if the 3D model or assembly was open in Creo. Of course, I am now wondering whether this is also possible in Windchill: I would like to reload a drawing from the common space via a mapkey from a 3D model or assembly opened in Creo, if the drawing is not yet in the local workspace, but a corresponding drawing is in the common space. Shouldn't be that difficult. However, I have noticed that mapkeys can only be recorded within Creo. Mapkeys do not work within the embedded Windchill interface. But maybe we could realise this with a script?

Hi   I am trying to run the below service, and it started failing suddenly. This is the error I see in the Logs: Thingworx and Navigate: 9.6.0     Thanks,

Hi,   Does Thingworx Navigate support the One Drive Integration?We know it supports Thingworx Flow, but is the Thingworx Flow yet to be deprecated?   Thanks,

Version: Windchill 12.1 Use Case: A new Library within Organization "A" that has users from Org "A" and Org "B". Each can see their own Folders but not the others. There is also folders that both A and B org users can see.Description: Considering using Domain selection at the Folder level.The new Library will be within on Org "A" and will have three top level folders. One that only users from Org "A" and see, one that only users from Org "B" can see and then a common folders. Need to understand how to add users to the Domain. We do not use Groups but place users directly in Roles.Are users are currently created within one Org and not both.We allow cross visibility by adding the other Org into the Guest role.https://www.ptc.com/en/support/article/CS19998 

Version: Windchill 12.1 Use Case: Uploading CAD documents generates a sequence (00001234) number instead of name.Description: Our windchill system has always been setup such that any files that dont auto associate to existing parts are assigned a 10 digit sequential number. How do I change it so that files checked in are are given a number the same as the model - ASM001.asm associates to a part with the number ASM001 instead of 00001234?

How can I download primary content throug API? We are building an internal tool and are trying to extract EPM Document primary content and metadata from Windchilll PDMLink 13.We've tried with REST API, but could only extract metadata, without primary content.Can anyone point me to the right API that can be used for this purpose?We are also planning to create CAD Documents/Upload Primary content to them, so that is also something that we need to work on. Any kind of advice will help.

Version: Windchill 12.0 Use Case: Requirement : Need to set Release Target Programmatically for Resulting Objects.Description: setTargetTrasition() is there but not getting a way to set Release Target.Currently I have CN , CA and when I try to get change Record that time getting class cast exception for any object.

Version: Windchill 12.0   Use Case: I want to import a part structure. I have done 'export importable' to get a sample for the format. Description: In the BOM sheet it shows a component-id for each child part. They look like this: a0726e2b-01a9-45b-8fe-cef2b59cc598 How can I create component-id's in preparation for import? The parts do not exist yet.   For pre-existing parts I see that the PartUsage table contains component-id's.

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.1I'm using the Silicon Expert Sync extension and when I click on the action "Synchronize SuMa Part" a pop-up is opening and in Message column we are getting "Error: Property 'http://javax.xml.XMLConstants/property/accessExternalDTD' is not recognized.Not found: the previous value will be kept. Please check your xpath expression for this specific data mapping via Diagnostics of this Windchill extension" after synch. Need to understand the message error.Here are the errors that I facedError: Property 'http://javax.xml.XMLConstants/property/accessExternalDTD' is not recognized.Not found: the previous value will be kept. Please check your xpath expression for this specific data mapping via Diagnostics of this Windchill extension

Version: Windchill 12.0 Use Case: We have a new licenses for the company and since then the publisher is not working. I updated the license on the publisher and made sure that "Worker Agent Adminstration" is working. They all look good. Is there something that I am missing.Description: Aug 16, 2024, 2:36:13 PM:Start Job: Assembly - ptc-oa-engine-assy.asm, X1.2 Aug 16, 2024, 2:36:13 PM:make temp dir D:\ptc\Windchill_12.0\Windchill\temp\pubtemp\publish9178537533189300603.tmp Aug 16, 2024, 2:36:13 PM:"As Stored" Config Spec is available Aug 16, 2024, 2:36:13 PM:The EPMDocument As Stored Config Spec was selected as the default Aug 16, 2024, 2:36:13 PM:Start: Assembly - ptc-oa-engine-assy.asm, X1.2 Aug 16, 2024, 2:36:13 PM:Authoring Application: Creo Aug 16, 2024, 2:36:13 PM:Transferring Files to: D:\ptc\Windchill_12.0\Windchill\temp\pubtemp\publish9178537533189300603.tmp Aug 16, 2024, 2:36:47 PM:Number of Files (identified to be) Transferred: 1,309 Aug 16, 2024, 2:36:47 PM:Creo Asm Co

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020-CPS16Also, where should I check?Creo View Adapters uses Creo 6.0.0.0 F000.Is there any other information you need?Please let me know.

Version: Windchill 13.0 Use Case: I have creo on my local device. I have windchill deployed on an AWS EC2 windows instance. I want to connect the creo on my device with the remote windchill server. How should i configure the network(if needed) to complete this connection. I am unable to find any documentation on this. Most resources only cover same device connection between creo and windchillDescription: Version: Windchill 13.0 Use Case: I have creo on my local device. I have windchill deployed on an AWS EC2 windows instance. I want to connect the creo on my device with the remote windchill server. How should i configure the network(if needed) to complete this connection. I am unable to find any documentation on this. Most resources only cover same device connection between creo and windchillDescription: Cannot find a solution to this online

I have a Thingworx Navigate instance (RHEL) that will not start up. Here is the error: 2024-08-14 20:24:19.669+0000 [L: ERROR] [O: c.t.s.ThingWorxBootstrapper] [I: ] [U: SuperUser] [S: ] [P: ] [T: main] *** CRITICAL ERROR ON STARTUP: Connections could not be acquired from the underlying datab ase! 2024-08-14 20:24:19.669+0000 [L: ERROR] [O: c.t.s.ThingWorxBootstrapper] [I: ] [U: SuperUser] [S: ] [P: ] [T: main] *** Web Application STATE is being set to ERROR! *** 2024-08-14 20:24:19.670+0000 [L: INFO] [O: c.t.s.ThingWorxServer] [I: ] [U: SuperUser] [S: ] [P: ] [T: main] >>>>>>> PLATFORM SHUTDOWN START <<<<<<<<< This system is a clone. We have some custom apps in here and we are using a MS SQLServer DB which also has been cloned. So what should be changing is the host name of the Thingworx instance and its connection to a new database.  I have updated the platform-settings.json with the new server host and port. I updated the encrypt

Version: Windchill 12.0 Use Case: Need to add logic to set the subtype of the wtpart based on an attribute value selected by the user on the save-as page.Description: Is it possible to get the attribute values selected by the user on the save-as page in the CopyWTPartDelegate? I have successfully extended the default CopyWTPartDelegate with some custom code, but I can't figure out how to get a string value that the user enters/selects on the save-as page for an attribute and use that value in my CustomCopyWTPartDelegate.Article https://www.ptc.com/en/support/article/CS28799 states that custom attributes can be set on the save-as page since 12.0, and I have confirmed it. I have also seen that a listener approach may not work for this purpose: https://www.ptc.com/en/support/article/CS408331. I haven't tried it yet.

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M030-CPS22Getting the below error when trying ldap export or backup from windchill directory server :You have provided options for scheduling this operation as a task but options provided for connecting to the server's tasks backend resulted in the following error: 'Connect Error'Here are the errors that I facedYou have provided options for scheduling this operation as a task but options provided for connecting to the server's tasks backend resulted in the following error: 'Connect Error'

We have a external web app and like to embed an url from the page in Navigate as a task. Is there any documentation on how to integrate or embed the External Web app in Navigate?

Hello,can anybody have a hint of what am I doing wrong? I am trying to create subfolder in the Windchill, using Postman application but all I got is the message "The syntax of the JSON document is not valid.".The query is POST:https://<myserver>/Windchill/servlet/odata/v5/DataAdmin/Containers('OR:wt.pdmlink.PDMLinkProduct:169546')/Folders('OR:wt.folder.Cabinet:169590')/Folders('OR:wt.folder.SubFolder:248107')/Folders and the body is: (the example is from WIndchill REST Guide 2.4 page 466.{ "Name": "NewFolder",  "Description" : "Desc",} the headers are: Also, Authorization is done using wcadmin account.I tried different data in json body but without luck.Does anyone have a clue what is the problem? Best regards!    

I am probably missing something quite simple - I can't figure out a way to search within a certain folder and the subfolders in WC. In other words, if I have the WC context with the following structure: Product1 Context - Folder 1 - Folder 2  --- Subfolder A  --- Subfolder B - Folder 3 I want to run a search in Folder 2 and include files in Subfolers A and B in search results. It seems that searching in folders has been added in WC 10. When I go to WC -> Quick links > Help > Windchill Help Centre ,  it pops up a page called "Welcome to the Windchill 12.1.2.0 Help Center", so I assume I am using V12.1.2.0 and I should have this functionality.  From some searches online, I found these pages that may be relevant:https://support.ptc.com/help/windchill/plus/r12.0.2.0/en/index.html#page/Windchill_Help_Center/LclSrchSearchInContextBP.htmlhttps://www.ptc.com/en/support/article/CS22115 Based on the first link, I should be able

This ptc article explains how length and special characters can cause errors when people electronically sign change tasks: https://www.ptc.com/en/support/article/CS245000?source=search We have seen this in the past and increased the length already so that leaves special characters. The logs show this message:  wt.org.electronicIdentity.SignatureInvalidException: Password for signature is invalid. Checking my logs, I am seeing a handful of users experiencing this but one also states that sometimes its working and I am not seeing a widespread issue. Only really change has been new laptop deployments with Windows 11 roll out. If it is a problematic special character, it would make sense that only some users see it and we can advise to avoid that. Strange since passwords MUST include special characters so we just need to know what to avoid if that is truly the issue.  

A Change notice is stuck at 'release changeable' . The 'Audit Change Notice' is already completed. But the documents in the resulting objects state is not yet changed. The change notice is still running. The error in the process manager is attachedIs there a way out?

Windchill_12.1\Windchill\vaults\defaultsystemrootfolder folder. I want to decrypt these files so that I can check the files within the attachments from this location, but I can't access them because they are encrypted. I can't tell which files are PDFs. Could you help me with this issue? Note: The files appear encrypted with names like 000000000000a8.

is there any api to get only parts which are present in part structure tab or any other way if api is not present. for reference see the pic attached below.    

HI Team, If User disconnected from windchill, Windchill system immediately send the mail notification. or If user profile modified any mail alert enable it possible? I tried to the below Article, but it is not working immediately, If we need to trigger one action that user against then it will send the mail. Article - CS55124 - How to configure the email notification for disconnected principal in Windchill PDMLink.