PTC Education

Hi ,have be studying product design and for that I get free access to student version.Yet it expire in 2021,and I want to acquire it back because I still being a student.But I can't because every time I downloading the new version of CREO PTC student the 8 one,I have this message telling me my rights have expire.How can I have CREO back. Can a member of CREO PTC support answer my back? I have been trying to reach CREO PTC  too many time.

Hello, I am following the IOT CONNECTIVITY WITH THINGWORX course but I am stuck at the MES setup, since I am using localhost setup and the tutorial connects to a remote server since they are using thingworx academic. Is there a guide I can refer to? Following the steps I have found I am always given the following errors:   SDK: Error intializing socket connection. Err = -1 twWs_Connect: Error restarting socket. Error 0  

Attempting to download CREO 5.0 as my university class requires, and there is no download link available at https://support.ptc.com/appserver/auth/it/esd/academicFree.jsp. It appears that versions 4-6 are not working at this time. Any help in installing version 5.0 would be greatly appreciated! -Jeff

Hello,As of today it's not possible to download Creo 6. When you click on the download link it just redirects you to the home page.May I get a direct link to download Creo 6 please? I have an important assignment and my license is expired, so I need the setup file in order to renew it Thank you in advance for your answrers 

Hello, my name is Jason Bolstad. I a CAD professional for over 20 years. I'm trying to get some advice on getting proper education with CREO and Windchill. I have used similar software, like CATIA v5/ENOVIA, Siemens NX/Teamcenter applications. But, I have zero experience using PTC applications. I have been trying build my skill set. Can anyone tell me an inexpensive route to take in getting proper learning, to build m resume up? Thanks, Jason

edit:  After many hours of trial and error, I finally "kinda" figured it out a bit of a hack that works but doesn't really make me that happy.  I'm now pinning the subassembly to the main body instead of fully constraining it, and then setting the limits of rotation to a minimum of 0 and a maximum of .01 degrees.  This tells Creo to treat the subassembly as a separate body, and the mechanism on the subassembly becomes a third body which works as intended.  I think if a weld connection might work as well, but I don't fully understand how to use them yet and I haven't had a chance to test it. Hi.  I'm new to Creo. I have created a subassembly in which a part moves via a pin connection. I then included that subassembly in my main assembly.  The part is attached to the ground body.  When I attempt to move the pinned connection on the subassembly, I'm told the entire thing is part of the ground body. Is there any way to fix this other t

Hello,   As we are working on resolving the download pages issues for Creo 4.0, 5.0 and 6.0 that are not working at this moment on any of the academic downlead pages: https://www.ptc.com/appserver/auth/it/esd/academicFree.jsp https://www.ptc.com/appserver/auth/it/esd/academic.jsp we created these direct download links (that will work until we resolve the download pages issues): Creo 4.0 - https://apps.ptc.com/schools/references/MED-100WIN-CD-410_M150_Win64.zip Creo 5.0 - https://apps.ptc.com/schools/references/MED-100WIN-CD-420_5-0-6-0_Win64.zip Creo 6.0 - https://apps.ptc.com/schools/references/MED-100WIN-CD-430_6-0-6-0_Win64.zip   Thanks, Alex

Hi Guys, i've tried to download Creo 4.0, which is needed for my University assignment.Unfortunatly I cannot download installation file - because there is none. I've created a PTC - Account - clicked on the first link in the screenshot, but there are no download files. It looks like this to me:  The HTTPS - link is just emtpy. there is nothing on that page. Can someone please provide me with some advice? Thanks!

Our FIRST team wants to model gravity, but mechanism dynamics isn't an option we are permitted on the k-12 license.  Can we purchase the University student license even though we are k-12, and, just to be sure, does that license include the mechanism dynamics option? Thanks!

Hello folks, I am able to load the PVS/PVZ files in Creo parametric and I am trying to access its data or the structure of the model components to perform certain operations but I am not able to get any documentation for the PVS/PVZ files. Do anyone have any idea "in what form do the data in PVS/PVZ file format is present ? is it solid or surface or tessellated ?" Is it possible to access the data in the PVS/PVZ file ? If it is then which toolkit API should I use ? having a proper documentation. 

Does the Windchill PDMLink funcitonality "download documents to compressed file" supports the following challenge?- 100 x MS Word documents need to be saved as 100 pdf files and then zipped as 1 file.

I am using Creo Parametric 8.0 8.0.0.0I have a student  who is installing the student edition of Creo 8. He has followed the installation instructions from here - https://apps.ptc.com/schools/references/install_creo8_unistudent_standard.pdf. When he creates the locked license, it says success, but then the status says invalid file and he does not get the option to finish.We also tried saving the license he received from the email and uploading that, but that didn't work either.We've already checked the physical address, and that matches.Here are the errors that I facedInvalid file

Each and everytime , licence has expiring...Whenever software wil logout.

I have downloaded Creo 7 from school PTC program and I unzipped "MED-100WIN-CD-450_8-0-0-0_Win64.zip" archive. Then, following "PTC Creo 7.0 - Schools Edition - Quick Installation Guide", I disabled antivirus and firewall. Then right click on setup.exe --> run as administrator.Nothing happens. I placed the unzipped installation package into a C:\PTC_install directory and launched C:\PTC_install\setup.exe, nothing still happened. I have a 64 bit computer and I am running windows 11

Коллеги, добрый день!   У клиента возникла проблема во время установки. При установке сервера ключей, при генерации локальной лицензии, при введении Sales Order Number (SON) выдается следующая ошибка (скрин 1.1 во вложении).   Также на странице ( https://www.ptc.com/en/support/article/CS21172?sourcearticle=CS154266&source=ArticleViewerRelated ) По требованию Перейти к заказу или загрузке обновлений программного обеспечения Скачать сервер лицензий PTC: FLEXnet Publisher изданный:   Доступ запрещен - недостаточно прав Согласно нашим данным, у вашей компании нет действующего соглашения о глобальной поддержке PTC.   Это может быть связано с тем, что срок действия поддержки истек по крайней мере для одного из номеров контракта на обслуживание (SCN) вашей компании, и вам необходимо повторно активировать поддержку, чтобы получить доступ к соответствующим областям портала eSupport. Для решения этой проблемы обратитесь к онлайн-менеджеру вашей компании или представител

As per this thread, similar issue:   I did what you said with creo 5.0. But it didnt works. When I open Creo there is also a skriptproblem. Pls helps me thanks! @MartinHanak 

Could anyone send full drawing data of engine parts and assemblies or another complex constructions.I try to train myself on Creo but I can not find drawing data with its dimentions.

Ich habe in dem 3D Modell zwischen des Sichtbarkeiten hin- und her- gewechselt und daraufhin wurde ein Teil meiner Zeichnungsableitung unsichtbar.   I switched back and forth between the visibilities in the 3D model and then part of my drawing derived from it became invisible. Translated with Google Translate by Iuliana Nuta on 13.01.2021  

Hello everyone,i need Creo 4.0 for my university project. Unfortunaly is it not possible to download this version. First I created a PTC-account in order to get to the following site. f I try to download a newer version I and click on the "HTTPS" link the download of the ZIP-file starts automatically. This does not happen if I cam clicking on the version 4.0 link. In this case the following page opens.  Does anyone know how I can download the 4.0 version? Thanks guys!

Hello,   I am an engineering student who last semester bought a license to use creo parametric and successfully used it for a couple months however now it will not run. When I try to open creo it gives the following pop up Then when I click yes, it gives this pop up, What is the issue here and what do I need to do in order to use creo?  

Hello,is it possible to use the PCB application of Creo with the free Creo Accademic version (Teacher)? I am getting a license error.Thank you for your feedback.BR Andy

Don't know which version to use with my windows 7 64bit computer

Hi, I'm trying to install Creo Parametric 5, but no license works.I tried with:BK500806ED0790-Y3M9-4RW5BE500806EDSTUDENTEDK12 Someone could help me? 🙂 Thanks

ERROR COMES AFTER STUDENT PRODUCT CODE FOR CREO 7, NO SUCCES MASSAGE INDICATE

I created a student account to get the free Creo software for college students. I got an email with the confermation that my account was created and with the following two links on how to get started: http://www.ptc.com/company/community/schools/http://www.ptc.com/company/community/education/PTC Academic Program However these links are not active. I get to an empty page "404 nothing to see here". How can I get to my students licence? I have allready downloaded Creo Parametric 7.0.0.0.