PTC Education

I have tried every solution given in one prescribed basic data given advice to some one still its not working  please do some help to create on creo software as soon as possible 

Hallo liebes PTC-Team,   ich hab mir soeben Creo 7 gedownloaded, leider ging dann dafür meine Lizenz drauf und erst am Ende der Installation wurde mir gesagt, dass die Hardware das nicht packt. Nun wollte ich Creo 6 installieren nur leider funktioniert die Lizenz nicht mehr. Könnt ihr mir da vielleicht weiterhelfen?   Mit freundlichen Grüßen  Paul 

"The requested URL "[no URL]", is invalid Reference #9.cf161602.1605141640.59dbbf7" . This is the error i keep seeing every time i click on the download manager link for the Creo 7.0. Is there anything i can do to download the free student version.

Die Steup.exe oder Steup-trial.exe startet nicht ordnungsgemaess . Das Zip Archiv wurde von der Creo Website heruntergeladen und ohne Probleme entpackt. Testweise wurden andere .exe im entpackten Archiv getestet: MED-100WIN-CD-440_7-0-0-0_Win64\install\addon\ [...].exe . Diese .exe Startet ordnungsgemaess und ohne Probleme.Setup.exe does not run properly. The zip archive was downloaded from the Creo website and unzipped without any problems. As a test, other .exe in the unpacked archive were tested: MED-100WIN-CD-440_7-0-0-0_Win64 \ install \ addon \ [...]. Exe. This .exe starts properly and without any Problems.

Creo viewer not installed. Creo parametric installed with errors. Mold/cast and mold analysis applications not working

Nachdem ich Creo7.0.0.0 installiert habe und das Programm das erstemal starten wollte, kam folgende Fehlermeldung, wenn ich diese mit ok quittiere, wird das Programm wieder beendet,  Kann jemand weiterhelfen??  

I successfully installed the Creo 7.0 Student Edition. But it can't be opened.  I can see the resource center, but the interface of the software is always blank,  like the picture in the attachment. Can anyone help me solve this problem? Thank you very much!

I am a college professor and have been teaching/using ProE/Creo for decades.  I've installed and assisted students in installing CREO especially in the past 8 months. We use the install_creo6_unistudent_standard.pdf document.    Now I am trying to reinstall CREO 6.0 on my home PC again, follow these instructions, it seemed to work, the got a license failed.  I did get a JRE not up to date, but no indication that CREO Parametric license failed. I've wiped everything I can find that might be PTC related and tried again and now get the message above.   I would like to to load CREO 7.0 eventually, since some of my students have it and I can't open their files.  However I can't find any CREO 7.0 student edition installation guide and I can't get past the Error!.

i have received error while installing the software creo 6.0 i need the procedure of opening creo 6.0 and my license request is failed for feature kindly resolve the issue

when I want to add table I click on the quick table the software crashes saying its commercial version feature, not available in the student version it's creo 5.0    

Community Thread for Creo for Academic logger

The error occurs as soon as I launch creo, the number being 0x06000012. I've tried to fix this problem by reinstalling, editing in the graphics win32_gdi to the config.pro file , restarting my pc, made sure my drivers were updated, and it's not being messed with by my anti-virus (read that all of these were ways to fix this problem but none have worked so far).     

I had some problems installing the program the first time so i reinstalled it but now im getting this error?

Hello everyone, I have a problem: for academic work I need to work on Creo 5.0 while i'm working at university labs, but on my PC I have Creo 3.0, which i'm using for other work. Is it possible to save a file in creo 5 so it's possible to open and work with Creo 3 after ? I tried to install Creo 5 on the PC but it seems it has problems. It is possible to have two versions of Creo working on the same PC (both academic licences) GCRI Method and .neu is not working

Hi!My license for Creo Student 6.0 is expiring in a few days. Whenever I try to renew it, it says that my email is incorrect (though it isn't!). What could be the problem? Kind regards, Matthias Pixner      

I installed 30-day trial of Creo Parametric. When I open the program appear following write "license request failed for feature". If I push ok, next message said "impossible to charge AFX" for two time. After this the program    Can you help me?

Hello,   If I try to connect with the education license to our Windchill system, I get the Invalid Server Location Error. I checked many articles (CS174534, CS185244, ...)  here but nothing is working: I reinstalled Creo I set some environment variables (I checked the env with a system which is working and found not one env variable about creo there?) I checked the server adress Even if I try to start the CreoAgent manually nothing happens Probably, I am missing the one obvious hint. So thanks for help. Kind regards, Arn    

I downloaded Creo 7 Student. When I open the program for the first time it pops up with a "Warning Message List" that says "License request failed for feature." I'll press OK, and then another message that says "AFX failed to load." I'll press OK, and then another message pops up that says "IFX failed to load." I'll press OK after that and it will close out the program.

How can I create my own vision targets for FIRST Tech challenge?

Hi there. My question is about detailed view style. Is it possible to achieve the effect shown on the picture below? I'm especially interested  with connector line between parent view and detailed view and circle boundary line in the detailed view.    

A software defect has been identified in Creo 7.0.1.0 that could lead to the corruption of a customer’s part or assembly when using copy/paste of a surface or quilt.   This defect does not exist in Creo 7.0.0.0.   Creo 7.0.1.0 has been removed from the PTC Software Download page. PTC is working to resolve this in Creo 7.0.2.0.   For additional information and suggested workaround, see Support article CS329211

I get these two errors after downloading a student copy of CREO4...   Please help, I need to create some work for a job interview.  

Hello all,  I have a single part that has datum A and B, then this parts gets machined in an assembly, and I want to reference this machining operation(in Assembly mode) to A and B (from Part mode). is there a way to do that in creo?   also, can datum planes be sequential from part to assembly? so if I used A and B datum in part, can I used continue with C and D....etc in an assembly?    thank you all for your help.  

If I enroll in this training course for a certification, will the free college Creo 7 download version have everything I need to complete the certification modules?  Or does the fundementals course require a higher license to complete everything?  Thank you for your help.   Sorry, didn't add the link: https://trainingcentral.ptcu.com/learn/course/internal/view/elearning/72/creo-parametric-fundamentals-certification-2020

Since 3 days I have an issue with some basic functions in my software CREO Direct Modeling 6.0. It is not possible to move parts by aligning surfaces or rotating. Best regards Sebastian Hoch