3D Part & Assembly Design

Criação de dados ISOGEN PCF    A interface Isometric Drawing Generation (ISAOGEN) exporta dados geométricos e de materiais de projetos de geometria para criar dados ISOGEN PCF. Esses dados podem ser usados ​​​​​​como entrada para aplicativos ISOGEN para criação automática de isométricos, spools e sistemas. Veja a imagem de exemplo: Minha pergunta é:  Preciso de outro aplicativo para abrir o PCF e enviar para o Creo DRW? Como abrir esses arquivos no Creo?   Translated by the moderation using Google Translate----------------------------------------------------------------------------------------------- ISOGEN PCF data creation   The Isometric Drawing Generation (ISAOGEN) interface exports geometric and material data from geometry designs to create ISOGEN PCF data. This data can be used as input to ISOGEN applications for automatic creation of isometrics, spools and systems. See the example image:   My question is: Do I need another application to open the P

Hello, so my problem is that i have a family table with three instances (A,B and generic). Depending on the choosen one, different Features in the lower parts should be activated or suppressed. So when i try to add a column with the Features, it wont let me choose them. I also tried it with Pro/Program but with no success. Are here others ways or have i done somethring wrong?Please answer me. ThanksSteve Creo9

Hi,I have some problems with the file. I open 3d model and i want only check some in the features. I roll up line in the feature tree check information and close window with the 3d model. I don't want save this file in this shape so I don't click option "save as". When I try open again the same file I see model like I had before closing window. How can I set this to not save automatically after closing window?? I know that sometime is very useful option but I prefer have a control when the file is saved.  

Hello all,I have used generative design in order to make lighter my design. But when I generated results, the reconstructed shapes had an issue, the Align command for two different curves was not created. I have tried to create manually alignment, but it is not accept it.Thanks in advance for your help!Best regards,Vlas

hey, i get this weird message in my Creo. i have no idea what caused it and i have no idea how to search for the feature which causes the 'break' also my model tree is half grayed out and i have no idea why. does anyone know the cause?  i have little experience with Creo and my company has very little technical support so forgive me if theres no enough information. 

Hello Again.  CREO Frustration week 10 - Just checking - is it really not possible to design "smart assemblies" were you can suppress parts/groups using parameters, unless I have access to PRO/program ?  I just happen to not access to this feature. Is it really not possible to do this using relations / parameters? Thanks in advance. 

Hello.  I am using Creo parametric 7.0.12 and Windchill, I am trying to make a copy of a drawing + part - keeping their association so I can re-name them as a new part number and make changes. However, the part I am trying to copy is an earlier version of the component in Windchill. so this is a level of complexity.  Our structure isabc.prtabcs.prt (this is the sheetmetal instance)abc.drw I want to rename them all to be dfg.prtdfgs.prt dfg.drw I have added to my workspace all the versions I would like to copy - both of the part and the drawing. But when I try to save as, I get an error!. It appears that the sheetmetal instance that I have  is preventing the save.  I get the same error message described in this link - but the solution does not work. >> https://www.ptc.com/en/support/article/CS74897 << I have tried to delete the instance, but the option on the family table is greyed out - so I am not able t

Hello Team, I'm trying to use a Merge/inheritance feature for creating another assembly file for kinematic/dynamic simulation assembly, so when the base model is changed by another engineer, it's easy for me to update either by manual or automatic option in Merge/Inheritance. Now I create every model name_Kinematic for all the parts, it takes a lot of time for me. Please help me with any automation. Regards,Sridharan

Hey,   I am trying to assemble a cylinder of wood that contains springs, the cover is flexible for movement as people will jump on it. Is it possible to assemble it the way I think on Creo ? If yes, how should the assembly of the cover. P.S. the cover should be rubber, so it can be move.   Thanks in advance for help   Best regards, Tariq

Using Creo 9.0....I have some legacy parts that were named with the description parameter and all my new parts have been named with ptc_common_name parameter. Is there a way for my drawing parts list to pull either name if i have an assembly with both new and legacy parts? I was thinking of adding a repeat region relation that is along the lines of the code below. Also, i don't want to modify the original part files. Is there a way to do this because my way isn't working. /NAME is new drawing parameter for the name columnIf description existsNAME = asm.mbr.descriptionendifIf ptc_common_name existsNAME = asm.mbr.ptc_common_nameendif

When modifying a .hol file, I'd like to specify the drill depth to more precision than 0.1. I have tried the following:  &DRILL_DEPTH[.01] however it still rounds to the nearest 0.1. I am using Creo Parametric 8.0.8

Is there a way for Creo to automatically generate a drawing tree? I'm not talking about the assembly drawing tree in Creo interface. In ASME Y.14.24 Types and Applications of Engineering Drawings, section 16, there's a Drawing Tree section. I'm talking about this. I attached the screenshot of it here. I have to make this drawing tree, and we have a lot of parts. It just doesn't make much sense to do it manually if Creo already has a feature for this. Thank you so much!

so I'm familiar with the help docs and other items in the help/support site on setting up a pen table (table.pnt)  but is there a specific "color" callout for cable part files?  or is it all wrapped up under pen 1? I dont want to set PEN 1 to black because ive got other entities on the drawing i want to have in color. Ive tried isolating the quilt_color to a unique pen and that doesn't work.  Any thoughts?  Or should I file an enhancement?  

How to remove offset between drawing and annotation as seen in image 

I need to move an assembly to a new file location (new tooling project). When I save a copy and rename the assembly, none of the parts or drawings move over. I don't want to rename the parts, because the current part #'s are established.Is there a way to move over a full assembly with parts and drawings without renaming parts and moving each part and drawing individually?Currently using Creo 4.0 I don't have access to Windchill, but the company does have a Windchill licenses if needed.

Hello,I'm using Creo Parametric 10.0 and I have a quesiton.Is it possible to have table on the drawing with lengths of each profile?Example how I want this table to look like:2 PCS | Profile 50x30x2 | 250 mm3 PCS | Profile 30x30x2 | 150 mm1 PCS  | Profile 30x30x2 | 120 mmI've created generic profile model with instances and I'm changing lenght of it by "making it flexible".I want to have this "flexible" length in table.Is it possible? Thank you all for your help.

We can manually control whether a parameter is designated in the parameter interface.   I want to know if we can control whether a parameter is designated or not through another parameter.   Like, When Control_parameter==YES, Parameter A is designated. When Control_parameter==NO, Parameter A is not designated.    

The "branch" command does not allow me to select the line to connect the tubes, what could be happening?   (view in My Videos)

Where is the ProRasterFileWrite API.Why can't I find it？I want to take screenshot for graphics area in Creo Parametric through toolkit.

Hi, I have to import a CAD file from ALTIUM software.The CAD file is an electronic board exported by the software ALTIUM in a 25 MB .step (or 20 MB .x_t).ALTIUM can export the files format in the picture below.When I import this two types of files, they opens in a long time.How can I reduce the time of uploading of that types of CAD models?  Best regards, Michele Barile 

Our requirement on the shield port/drain wire is assigned to multiconductor cable. Both sides of the cable is connected but the shield port/drain wire is terminated (connected) at one end of connector and unterminated (not connected/open) at the other end of connector. Once the unterminated shield wire is defined in schematics, it needs to be exported into XML and use it parametrically in the harness drawing without doing any additional manual work in the Creo cabling. What is the best possible solution to have a shield port/drain wire as Unterminated. We use CS 7.0 and there is a document available in PTC website. But the info is not sufficient for us to define and use the shield port/drain wire as Unterminated parametrically. Any additional information or videos can really help the users to understand better.

Working in Creo 10 I have a note on a drawing that I need to call out a combined surface area for two separate areas on the part. With single surface areas I like to drive the note parametrically by creating a measure feature in the model and referencing it in the drawing note with "&AREA:FID_XXXXXX[.1].Which ends up with this, which is what I want.However, to have both surface areas in one note I have to add them manually and input them as text, non-parametric. I've been trying various takes on this: "&area:fid_xxxxx1+xxxxx2" with no luck. Does anyone know how to combine both values into one parametric note?  

Hello Support,after installing Creo Schematics 9.0, when starting and closing the Creo Schematics application, our EDR software detects the .bat script that Creo wants to run every time. Each time it is a random name, for example "bg-hpul3.bat".The file has a different name and SHA each time. The only common point is the file location, for example "'c:\users\username\appdata\local\temp\bg-hpul3.bat".1. Do you know what the following script calls?2. Is this script responsible for some Creo Schematics functionality?

Hello, Does anyone know if Creo 8 or 11 will display higher than 1080p. We are getting new offices and are trying to decide on new monitors. Does anyone know if 1440p is worth it from experience when you mainly use Creo?  Thanks in advance, Lex

I have the huge assembly. One of the drawing view have local section. The option "remove_cosms_from_xsecs" - set as "trim". In this case the section is shown correctly, but some cables are not visible or partially visible. When I change option  "remove_cosms_from_xsecs" to "total", then  all cables become visible, but section looks strange. Please see attached picture: there are shown displaying with different settings. Maybe somebody knows the secret trick how to make all thick cables visible and at the same time so that the local section is displayed correctly?I use Creo 9.