3D Part & Assembly Design

How to keep the symbols also consistent with other Pen_width? SEE IMAGE Please. Thanks in advance with your solution. It looks so odd on a print.    There always something crazy challenge in Creo!

hi,i'm using Creo parametric 12.4.2.0 and it seems that with My Filter enabled for selection it doesn't switch automatically to Cabling Items when using Cabling module.is there something to change about that?thanks

I also have this issue. Reference topic: Parameter PTC_COMPONENT_SETS has invalid set na... - PTC Community   When I use the "insert here" trick to see when the message appears by dragging this "insert here" lower in the feature tree I managed to find out which model is giving this error. I've tried a lot but also completely remove the model and constraining it again the error appears again. This model is an assembly and within the assembly the PTC_COMPONENT_SETS message isn't shown.   @dcokin wrote: The trick is that to find and control these values, you need to look at component level parameters.  From the parameter dialog, change the "look in" menu to "Component", click the arrow, and then click the desired component from your model tree.  It'll have a string parameter called "PTC_CONSTRAINT_SET", which lists the active sets separated by commas.  (In rare cases, you may need more than one active at a time.)  Inconvenient thing about

The customer plans to upgrade to Creo 10.0 in the future; however, all drawing work is currently being performed based on Creo 3.0.Accordingly, I am modifying drawing formats (.frm, .drw) in a Creo Parametric 3.0 (M190) environment.In the drawing tables, parameter values are linked to table cells. When the parameter values become long in the drawing, automatic text wrapping (Wrap Text) is applied to improve readability.However, when Wrap Text is enabled, the full parameter value is not preserved. Only the last line after wrapping is displayed, and the parameter is not recognized correctly.According to PTC article CS230831, this issue was resolved in Creo Parametric 2.0 M220.I would like to ask whether there is any configuration change or workaround available to resolve this issue in the Creo Parametric 3.0 environment.

Thanks for any hints for solving this efficiency issue.

Hi folks, I've built a pretty simple front panel and I'm trying to make a drawing out of it. When I placed the Front and Right view I noticed that it's showing me all the hidden lines, even though my Display mode is Shaded with Edges (I've triple checked this and I have also tried to change it to No Hidden, no luck). View Display for each view are set to Follow Environment and all Layer elements are hidden. I've even tried to manually hide them via Edge Display and that doesn't work either (doesn't hide anything, but Show Modified Edges does highlight my targeted lines). Lastly Force_wireframe_in_drawings is set to off,  I've looked around for previous topics and found no resolution, so here we are.I've attached an image of the drawing (front view and right view as Section) and the 3D model from the front and back view so you can see where the issue is appearing: the rear-of-panel-cut out is showing up in the front view and the side view is showing every c

I like the new (well, it's been a few years now) tools for Project and Offset. They're harder to teach, but they're more robust. But today I tried to use a seldom used command: Convert to Tapered. It used to be you can select an Offset geometry in the Sketcher and hit Operations->Convert to->Tapered, and then have the offset vary from one end to the other. Nice little trick. Well, it seems it doesn't work anymore? I tried getting it to work, but it's always greyed out. I searched through the documentation, and found this little note:  When you use the new tools for offsetting or projecting an edge the following functionality is not supported.• Projecting an axis.• Projecting or offsetting in the Blend tool.• Creating a Pattern of the type Curve.• Converting the new offset geometry to Tapered. Hm, I guess we got some new limitations with the new tools. But the fact that the option is still there (but greyed out) and the fact that the documentation says whe

I am using Creo Parametric Release 9.0 and Datecode9.0.11.0When I import a tiff image in my DRW the created dimensions, notes, and symbols appear above the image, while sketch entities appear below, so I have to increase the image's transparency to manage them.I there a command for put under the image?

Hi! I use merged balloon symbols for multiple component. If this merged balloon symbol is moved the leader always move to the middle and works inconsistently.:(view in My Videos)Is there a config key settings to disable this behavior? I think it is a new thing, never happened in previous version of creo (creo8).I'm using: Creo parametric ver. 10.0.4.0 Thanks in advance!

We have started to explore the Framework add in with creo.  We noticed that the 8020 library is missing a LOT of sizes and components.  Is this actively updated?  Is it our responsibility to add in the additional sizes and components to meet our needs beyond the basics that is available? Thanks

 Q1 how to create new profile in creo 8 and saved to libraries?Q2 I had selected rose krieger profile and Bosh profile but in creo, It showed as a rectangular tube with hole in it. how to get the actual visualization? why is that happening?   

Hi Community, we are currently thinking about adding some more t-slotted profiles to the advanced framework extension and are wondering what you are using in you designs.  Currently we offer the following manufacturers: Bosch Item Kanya Maytec Minitec Rose+Krieger Frameworld INCH 8020 INCH Controlled Dynamics Do you miss anything in this list and also if you are using the mentioned libraries already are there profiles missing that you would like to have in a future release?   Any feedback is welcome.   Greetings Sam  

OK ... slightly embarrassing - but we will own it.  For the nearly 5,300 users who were NOT able to get a FREE license of: Nitro-BOM, Nitro-CELL, or Nitro-PROGRAM We fixed the "glitch"!   Special thanks to a couple of people who took the time to document an unrealized problem.   There were no problems with Purchased or Demo licenses - just the FREE ones.   Enjoy! 😎 Dave

I’m looking for a solution to build a Configurable Product in Creo that includes a mechanism.Here’s the scenario:I have a rail mechanism with variable length.When a specific variant (length) is selected, I want the linear motion to be limited according to that selected length.What I’ve tried so far:I created a Motion Skeleton inside the Configurable Product.The rail module was connected to the first body of the Motion Skeleton.The cradle module was connected to the second body of the Motion Skeleton.I was able to build variants using Variant Builder, but the problem is:The cradle’s position is driven by the Motion Skeleton.Changing the rail module length does not affect the motion range, so the cradle runs out of short rails.To fix this, I moved the Motion Skeleton into a new module to build different lengths.However, the Assign Choices function doesn’t work (red icon appears, and I can’t check the checkbox for length).Question:Has anyone successfully built a configurable assembly that

I am using Creo Parametric Release 5.0 and Datecode5.0.6.0工程图里面的表格和尺寸线线的颜色，能通过配置修改吗？电话15992617285 邓工

Do you have to produce design data (2D Drawing, MBD packages, etc.) that supports a mix of suppliers where some want ISO/DIN standard GD&T and others want ASME/ANSI standard GD&T?  This question came up from a team at our European division that is working between Creo Parametric and Windchill and NX and Teamcenter.I had always thought the standard was up to the company creating the content, with some understanding given to the typical standard for the majority of the suppliers being used.  Any suppliers for whom this isn't their norm would still have to follow the called out standard.We would be curious to hear if anyone is providing content that covers both standards as part of normal process, and how (overview) you do it.

I have creo 9.0.5. I'm trying to export a .dxf file so that i can import it into my plasma table software (torchmate V9). The problem is when I go to import it into torchmate, nothing shows up. A long time ago Creo support helped me change some export settings and we got it to work but I've forgotten since then. Any ideas?

I recently has some symbols in drawings change. Some are missing. Then I noticed that the Dimension Text Symbol Pallet has changed. Did I accidently delete something or redirect something to make this change?           I checked this post and a couple of others without finding a solution:   https://community.ptc.com/t5/3D-Part-Assembly-Design/Symbols-missing-from-dimension-text-pallet/m-p/967490#M136117

We are actively moving to SharePoint data storage. Can assembly be organized with Parts in multiple folders / Multiple access users working on different parts of an ASSEMBLY. Assembly Regenerate should update the assembly with latest in SharePoint folders.  

hello all, i am using the simple repeat region method to create a family table in my assembly drawing.because of this i am using filters such as "&fam.inst.param.name == xxxxx" however, in my assembly, i have the same part file copy pasted 4 times (they make a square within my assy) and each instance of the assy has different instances of that part file. ex:assy-1 has part-A, part-B, part-A, part-Bassy-2 has part-C, part-D, part-C, part-Dassy-3 has part-E, part-F, part-E, part-Fassy-4 has part-G, part-H, part-G, part-H so if you notice, they have basically a top/bottom and side/side of the square for each assy instance.when i use the 2-d family table it comes out correct, looking like the example but in table form, but i want to use the simple table because i want to change the top row names. when i apply the filter like always, because the part file is named the same for all instances possible, i end up getting ALL 16 of the part instances for each compone

My mirror features in my sheet metal is not updating when I move my cutout in the sketcher. I noticed that there are plenty of threads mentioning mirrors not working, but what is the solution? is there a config file line that I am missing?

Hello, how can I make the flexible parts used in snapshots appear in the drawings, for example, the different states of a spring depending on the positions of a mechanism? Thank you

Hi, I am trying to select multiple references (2 a surface and an edge of a part) when creating a datum plane. For some reason holding CTRL while selecting them doesn't work. I can select one or the either and it turns green but when I hold ctrl the surface turns orange for a sec but doesn't select. Could this be because I am using VMware Fusion on my Mac laptop. Is there a work around that I can do? I need to have two references to add a rotational offset for this plane. please help.  Thanks

We are planning to use some AAX extensions to our global licensses PROE_DesignEssG.Is that possible and how can that be achieved fo specific selected users. 

As the title says. I want to learn all the functions available to be used in repeat region filter and relation. The documentation here is very limited https://support.ptc.com/help/creo/creo_pma/r12/usascii/index.html#page/detail/About_Writing_Relations.html#Arguable it's just the introduction to what the relation does. But does not give full details of what all functions are available. I've seen in my company people using much more advance relations to filter items in repeat region. I took the Creo authorized course some days back but sadly the instructor kept it just on high level and struggled to provide solutions for complex filters.How can I learn more on this, something that is comprehensive and all inclusive.