ALM

After installing codebeamer 2.1 with psostgresql, codebeamer is running and the homepage http;/localhost:8080/cb is up but when I try to login using the credentials entered during installation there is an error: Invalid User Credentials!   Lost password does not send a password reset email.   Can create new accounts, but a admin account is needed to compete post-install config.

(Codebeamer version : 22.10-SP7 )Our company, which is supplying SW packages in automotive as tier 2, is planning to get ASPICE assessment with Codebeamer projects. We roughly estabilished our concepts as attached based on Codebeamer wikiBefore departing this, we have questions which requires the expert's guidance and confirmation. Is it ok to manage customer projects by linking differing contents to 'Platform project' rather than copying 'Platform project' contents into each of customer projects?Is it usual case to manage platform projects more than single one?Which documents are normally manged in 'Platform project among lists?How can we handle baselines efficiently? Does this concept described in below image make sense?Thank you

We are trying to evaluate the effectiveness of CodeBeamer by measuring the difference in requirement traceability confirmation time before and after its implementation.Since it is very difficult to manually measure the time it takes to confirm traceability after CodeBeamer has been introduced, we would like to measure it using user operation logs.Does CodeBeamer have such a feature?If not, could you suggest an alternative method?

Hello,I am trying to figure out where in the Codebeamer PostgreSQL database (codebeamer 3.1.0.0) can I find the tracker items and the data contained in all of the fields including the custom fields?  I found what appears to be the Summary field of the tracker in the table public.simple_field_value.  Is there a database schema available for the Codebeamer database? Best,Andrew

Hi I am looking for infos about writing testresults back into a testrun.I found the metioning of this wiki entryhttps://codebeamer.com/cb/wiki/28836359but my user does not seem to have access to that page. Does anybody know how I can get this information?Thanks in advance

Hello,I am trying to figure out where to find the Project Groups section in the Codebeamer X UI. An older wiki page for Codebeamer X (https://support.ptc.com/help/codebeamer/r3.0/ko/index.html#page/codebeamer/cbx_user_guide/cbx_projects/cbx_11126.html#wwID0ETSGKB) says that user groups can be added. But the link for how to do that is a circular reference to its own parent page which doesn't contain the information.  Are project groups still a thing in Codebeamer X? If yes, where do I find them? If no, what has replaced this functionality?

(Codebeamer 2.2.0.0)I cannot find a way to generate report with data from review-hub. I would like to monitor:number of ongoing review and their statusratio approved/rejected...how to call review data in the "new report" page ? Thanks !

Pretty self-explanatory! Though I don't think it's the case, I wanted to ask around if anyone can confirm that project baselines are not able to templates.  Thanks!

I want to use the java api to run a report and get the result.It appears, from the documentation that running a report creates the output in the servers data/tmp directory.From docs: "For security reasons, all file references on the PTC RV&S server are restricted to the data/tmp directory in the server installation directory."Using the java api, is there any way to get the result of a report ?thanks

Can I execute RV&S 10.8 client program on Windows 11?

Hello Community, We have two projects in CodeBeamer. The requirements in the first project are identical in many ways to the requirements in the second project.We need a tool that will take a tracker from the first project and compare it to the same track in the second project, and do the following: Compare the description field of both requirements.If the same - copy the "Status" field and some Free text fields from the first project to the second project.If different - set the status field of the other project to "Under Review". Is this something that Codebeamer can support?  If not, is there an external tool we can work with to fulfill this need?  Any solution would be welcome 🙂 Thanks!

Is there any end to end documentation available to integrate these systems, documentation available on the support side is very confusing.

Does anyone know the reason behind this issue? I am getting a command line window pop while trying to add members in configuration management side of Windchill RV&S. After looking through the client logs. I found out that this : Running trigger from preference si.AddMembers.post named AMpost command: cmd /k "edit %MKSSI_WORKINGFILE%" but I didn't found any relevant trigger in either of client or server side of the Windchill RV&S.

We're happy to announce that  Codebeamer 3.1 has officially been released! This release features new capabilities as well as features being built on the foundations laid out in 3.0 The information on this page will be updated with blogs and webinar details being published in the coming days. So bookmark this link. In the meantime, here are the.... Key Highlights of Codebeamer v3.1 Configuration Management & PLE support Create Streams from multiple projects and work with projects in a Stream. Extend Streams by adding projects. Consistent handling of cross-project reference in Streams. Replace data duplication with intelligent linking for: Faster loading performance with large data sets Reduced storage and system overhead Live consistency across reused items Simplified reuse and change management — ideal for regulated industries Full Baseline Filtering Pure Variants uses Streams as a platform and creates variants as new Streams. Integrated Product Engineering & T

Hi Team, As of now, in PTC Codebeamer we have fields for line items inside the trackers, but a lot of customers are asking for the tracker-level fields or attributes such as part number, serial number etc etc. As this functionality is not present in Codebeamer, we request you to consider this request and implement it in further releases of Codebeamer. It is important to note that a lot of customers are asking for this functionality across the globe, and also the other ALM solutions has this functionality. Incase of any further clarifications, reach out to @shaikraj.a@mgtechsoft.com Thanks & Regards,Shaik Raj Ahammad

Hello all,   while trying to create an ALM checklist with the below command I am getting an error. I would appreciate if you could propose a solution for this: C:\Users\kusuo>im copyissue --type=ALM_Checklist --addFieldValues="ALM_Template=3006228" 5875610Creating ALM_Checklist ...Adding field values ...Submitting ...Could not save item: An error occurred while executing a remote method call; nested exception is:java.lang.AssertionError: Unknown fva rel: class mks.util.IntSet   Target is to link this checklist to a review later on. On the GUI, a linked checklist is created through the create a related item link:  

Unfortunately, Codebeamer is no longer displayed on the product download overview How can I see the download and the versions again?

I apologize if this has already been asked but didn't seem to find it in a search. I am new to codebeamer, but I can't seem to find a spellchecker built into the software. Where do I find this feature or is it not available? Seems like it should spell check as a person types like most every other software out there.

Hello All, i am seeking Help for SI Deleteproject, i used it sucessfully it deleted , but there is ? in from of the subproject which got deleted, i need to fully remove it from the DB so that in future if same name subproject is created it will not cause any error. can any one provide the work areond to fix this? Not i am admin with app & db server full access. i can run cmd on the DB or app server, pls share your case how the cmd helped you, if you can.

Hello everyone, Is it possible to display an image present in the documents tabs within a description of tracker item? I can add the link option to the image but not display. Thanks to everyone.

I would like to create a re-usable choice field. When working on multiple projects, is there a way to implement a choice field into each of the trackers I am working in without having to individually create each option every time? I understand that I could do this by creating a tracker that has my options in it, but then I would lose some of the functionality of say... the Type field where Folder and Information Types display differently from the rest. Is there an out of the box solution for this? In Jama, there are Pick-Lists which can be referenced anywhere throughout the project and re-used as needed. I am looking for something similar to this feature

Following situation:Tracker A has a field that references items from tracker B.An item of tracker A (A*) is created. The field is set to point to several items of tracker B (B*1, B*2, B*3)The History of item A* now shows that the reference field changed value from nothing to (B*1, B*2, B*3).Now delete item B*2Now the History of item A* now shows that the reference field changed value from nothing to (B*1, B*3). (The same version as before)Expectation: We need the reference for the above scenario

We need to expose the installed Codebeamer from outside of system , from any Public network so that we can integrate codebeamer with any Application like Git, Jira, Windchill etc.

i would like to know is there other methods to delete traceability links for reference(upstream,downstream) and for association please

Hello Volker,   Is this solution not working for RV&S 12.5 ? While performing, I am getting below java error. Can you please support to fix this issue.   C:\app\tools\ptc\Windchill\RVSClient12\lib>java -jar IntegrityCopyParameters.jar --hostname=XXXXXX --port=YYYY--username=AAAAA --sourceItemID=3288947 --targetItemID=3047142 --copyFields="Parameters,Parameter Values" Error: Unable to initialize main class copyparameters.CopyParameters Caused by: java.lang.NoClassDefFoundError: com/mks/api/response/APIException