Archive Read Only

Hi!Is there the way to import into Creo facet files with a textures. OBJ, VRM ???

My apologies if this is not the correct forum to seak this information.We have recently moved from old Sun Ultra 10's to Windows 7 and need CADDS to take care of legacy data going back 30 years on an active project. I've encountered numerous problems with getting CADDS 5 rev 16 (currently on 16.1 M040) to work on Windows and although I can get CADDS to work most of the time, it seems unstable and the slightest hiccup can stop it. PTC Tech Support has only been able to help with about half the problems. I have found some solutions myself after much trial and error. I've opening so many cases over the last few months, I'm almost feeling that they are ignoring me.I am looking at connecting with anyone who is activily using CADDS 5 on Windows or at least has a fair amount of experience who may have already gone through the process. Maybe recommendations on who to contact, companies who still use CADDS, etc. I've done searches on the PTC Community for anything CADDS and the only area that p

ever tried in Flexmove tool..in pro/e?

Hi,I was looking for a solution for warping several parts a few time ago.I cannot test it yet, but does someone knows if there is any solution withCreo3? Thanks,GB De : G. Bon [

ich habe ein statisch FEM Analysis bei Creo ausgeführt. Creo erzeugt beim FEM Analysis einige Datei, die ich brauche zum weiter Bearbeitung, dazu gehört z.B. study/Analysis/study.s## und study/Analysis/study.neu.Was ich genau eilig brauche und nicht finden konnte ist die Geometrie von jeder Knote. d.h. Knote-Nummer w.r.t. Geometrie (Querschnitt, Flächenmoment 2. Grades Iy und Ix, Axial Wiederstandsmoment Wy und Wz, Statisch Moment S, usw).Wie können Sie uns helfen?Andere Frage: Wie kann mann die Knoten Nummern anzeigen (Wie die Punkenummern)?Danke.

I've been using Pro/E since version 17 and really have enjoyed using the program but as of the creation of CREO....not really impressed with the interface.Your thoughts?-Art[cid:image001.png@01CFA0E4.5DF2E1E0]This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.

hay guys and girls,is it possible to change the ribbon ui colour? this new colour pallet is bright as in neon bright. compared to the new 2015 autocad ui its like looking at the sun. basically I'm having a lot of trouble finding the buttons amongst all of the white especially now that button colour has been washed out as well.for now ill just whack the gamma down to almost nothingid rather not make a hundred macros with more contrasting icons but i will if i have to.so can we change this?

You can make points when you measured the two curves.But you can't make points when you measured max distance of two curves.Do you know way of making point at max distance?

Hi,AFX should be establish the project name and support the named parts/assemblies one by onebut there is a large problem in efx/equipments.project_name=1420 ,the named stair assemlby: NF1420_STAIR_1_1the named stair parts: NF1420_ U_BEAM_1_L1_1 ,and so on;So I can create the element_name.txt in \efx\parts\equipment\steel_construction_mm\stairs ,The content :PROJECT_SHORT#_#ELEMENT_NUMBERnow project_name=1420 ,the named stair assemlby: NF1420_1;the named stair parts: NF1420_ 2; NF1420_3 ,and so on;These named parts/assemblies are not my named code;so I need a named code ,for example:project_name=1420 ,the named stair assemlby: NF1420_1;the named stair parts: NF1420_ 1-1; NF1420_1-2 ,and so on;I need help from buw and tell me the named code .THANKS !

在CREO 2.0 裡 註釋裡注記新建輸入好文字放置在FLA TO SCREEN等角視圖或其他的視圖為何都放不上去??

Thank you for the replies. The answer is that there is a Pro/Program attached. I have never used Program so thank you for the answers.Ronald B. GrabauHP PDE-ITRoseville, CA916-540-3074-<">mailto:->

Wildfire 5.0 / Creo Elements Pro 5.0Is there any way to make a variable chamfer like a variable round? I poked around the chamfer command, looked at the help files, searched both the exploder, and the community and didn't really see anything...-marc

Ok, I am trying to model a stiffener between the two grey gussets shown below.I want to be able to use the inside of the gussets as references along with the red and orange plates. I am obviously a little confused on how to use Copy and Publish Geometry features in Creo. My counterparts did this using "Geometry Backup" shown below.How do I do the Geometry Backup shown for this stiffener? Thanks!

Last evening i was solving a 3 X 3 Rubik's cube and it thus came in my mind "If it was even possible to make a completely working Rubik's cube in any version of Creo?" If it is already made, give me the link please. If it hasn't, experts wanna try some hands on it?

Unfortunately, my application crashes on a customers computer and atraceback.log file is generated.The following is the beginning of the traceback.log file:

Hi,I was pretty sure to be enable to create PDF3D but can't remember how.Is it possible?If yes, how can we do?Thanks,

where are you dear Creo 3.0?...I have been waiting for sooooooooooooooooooooooooooooooooooooooooooooooooooo long....

Revolve requires center line created in the sketch. why not pick some edge/copied edge for revolving operation

Bonjour à tous,Une question m’intrigue fortement quant à la fonction de déformation globale (Wrap, en anglais).Je cherche en effet à appliquer une déformation à un assemblage de quelques pièces (moins de 10).Cette fonction n’est possible qu’en mode pièce.Je cherche donc une astuce pour appliquer une déformation équivalente sur chaque pièce.(Un moyen qui me permette d’appliquer la même déformation sur chaque composant).Une autre solution possible aurait été de créer une pièce issue de copies de géométries des toutes les autres et ainsi de déformer cette pièce unique…Sauf que certaines parts comportent des fonctions ‘’facette’’ et qu’on ne peut pas en faire de géométries publiques !A moins qu'il y ait une astuce ???Pour résumer, 2 techniques me bloquent :- déformation globale d'assemblage.- copies de géométrie (géométries publiques) de fonctions facette.De ce que j'en ai entendu, Creo3 ne gérera pas ces fonctions non-plus ; inutile d'attendre, donc.Si vous avez des pistes, ce serait supe

Hi,In Wildfire5.0 I can caopy the entire table butin Creo2.0 I am unable to see the functionlity in my RMB.My Pain is to save the table and the import it back in Creo..Please suggest if anyone knows.RegardsRashmin

Why does PTC company not to develop a suitable gear system? We just only need to enter the appropriate data that can generate a 3-D gear models, in this way to enhance efficiency. I know there is such a system for SW or gear plug-in( called GearTrax). Inventor also has such a system

Hi, i'm not able to import unigraphics file to creo student edition. It's showing me to select the unigraphics filter. How should i do it???

Good Morning,Can anyone advise me if there is a way to create a section view within a .stp file import.Regards,Paul

how can I make coaxial wire which are made of Central core wire with 5 outer wires (100-twists per inch) see the fig?

I WANT TO DESIGNE A MODEL OF WIRE ROPE WITH A SPECIFIC DIAMENTION PLEAS HELP ME FOR THIS