CAD

I am in Creo Parametric 9.0.8.0. I am attempting to generate an MCD in Creo NC. I am able to generate an NCL file with no issues. However, when I try to generate an MCD file, after all of the prompts, I check my working directory and there is no file for the g-code output. I have attached an image of the log. Am I missing something here? 

Good Morning, Community,Would anybody be kind enough to help me on how to create a table in Mathcad Prime 8. Please see below.Thank You, Boyer

Hello, Very new to the software which I plan to use as a worksheet for exercises, so the following may be requiring a very simple solution.I am using Mathcad Prime 9.0.0.0. I am trying to solve an equation both symbolically and numerically (?):I don't seem to be able to get a result and I also don't seem to be able to use = instead of :=. Any help?Thanks!

Hello.I'm using Creo Elements/Direct Modeling (x64 edition) Revision: 20.1.2.0, and every time I export a SLT file, I need to change the maximum deviation value. Is there a way to lock these values to create a default parameter? 

I was trying trigonometric functions in Mathcad & for some reason I couldn`t get these results/values in fraction mode. Is there a way to enable them? I couldn`t get it in Math Formatting Tab as well. Please feel free to share your thoughts.- Srikar

Hi I am currently working on CREO 11, when calculating mass properties for any CAD file, the results always comes up as scientific notation (MASS = 6.0445521e+01 GRAM ).I tried looking and adjusting descimal dislplay in the configuration but it does not affect the mass calculation results.scientific notation results                Is there a way to get the mass calculation as:MASS = 60.445 GRAMThanks

Why there is even wire create option ? I cannot follow a second wire along with the first created wire. !. CABLE does it much better and flexible. So what is the advantage/ Vs / when to use. between both?Thanks Advance! PL enlighten me with your thoughts. 

I do not see a dedicated community for Cabling Corner. Can PTC add that? or where to look for if already there? Thanks! 

How to use CREO software to create animated videos?Do you have any information to recommend?

Mesh export in fem mode Nastran with singular node is taking too long to export. Can someone suggest any tips to increase the export speed. meshing is quick but export to Nastran takes more time

Where did the Angle snapping setting go in Creo 10 for drawing lines at specified angles on drawings?I can't find it anywhere.

Hello everyone,I have a question, I want to build animation of Electromagnet in Creo 10. Like in this video:I build a model with a curve, which the electrons can go throughHow can I use the slot Connection and pattern here?I tried to make 2 Point on the electrons to have the similar distance of them, but it doesn´t work 

Hello Community!We've had difficulties with cross-sections in a specific situation :We want to show section like hereunder to detail the hole profile : And this is the result we get :It seems to be related to the section plane position : I believe this is because there are counterbore surfaces on the same plane as section plane and Creo seems to absolutely hate this : In every community post I saw that were slightly similar to my case, the best working solution I saw was to set an offset for section plane. I tried here with a 0.01 mm offset and it works. Do you have any idea where it comes from? And is there any other resolution to this problem than cheating with an offset? Thank you in advance!

I am using Mathcad Prime Release 8.0 and Datecode8.0.0.0I just moved from Prime 5.0 to 8.0, and some integrals (symbolic calculation with units) no longer calculate: while it tool a couple of minutes only, the orange disk turns infinitely without success.I'm wondering whether I made a spelling error due to new engine, but I cannot find the solution.

I was able to copy this activation key, which is valid for 72 hours, and paste it into the Manual Product Activation window to use it.The first time, I was able to use it for 72 hours without any problems. After 72 hours have passed, I want to use it again, so I do the same thing, but this time a window appears saying that is incorrect and I can't use it. No matter how many new activation keys I receive, each key is always incorrect and a window appears with the message "the key is not correct". Question:Is this 72 hour activation only once per account? ↓↓↓Confirmed↓↓↓"I create a new account, and i get another 72 hours for activation.But it seems so ridiculous to create a new account for every 72 hours activation..."

After working well since initial download on 7/30/23,  Creo Modeling Express no longer starts.  Instead a pop up dialogue prompting me for email and password to Activate comes up.  After entering my e-address and password. and selecting 'Activate' I get a second dialogue saying:  Connection failed.  For Modeling Express to automatically activate it requires access to the internet.  Please check if a proxy has to be specified and enter your company's proxy server details so that activation can proceed.  I'm merely an individual with a laptop, there is no proxy server.  My internet connection is fine and I have a basic PTC account.  How can I fix this and why did it happen? 

My company is wanting to start modeling wiring harnesses in 3D. My plan was to add the connectors into the CAD model with an axis at each point where a pin would be. My current problem is I don't know what to do about the terminals and the locking mechanisms for the terminals (like the small plastic piece you shove in a Deutsch connector so the pins don't come out). I would really rather not add the terminals and locks into CAD just because there just such tiny pieces. We have part numbers for each lock and terminal, would it be possible to somehow add that information to the connectors Creo file? So once the 2D drawing is made is can pull in and show the connector the terminal and the lock when you make one of those tables? Thanks in advance 

Hello,I am attempting to scale an item I received from an outside source but whenever I try to use the Scale Model function, the assembly/part does not go under any changes. Is this because the item should have definitions within it, such as sketches to transform? The item I received had no internal sketches or dimensions, so I wonder if that is the cause? For reference I am looking to save the nominal item to a proportionally smaller size and I am on Creo 8.0.11.0

I am having an issue where routed cables are offset from the single connector entry port instead of centered around it. Is there a setting that controls this? I don't recall this ever happening before and after many tests it seems to be most pronounced when using multi stranded cables (twisted pair shown in the attached image).  This is producing some unwanted artifacts when moving into drawings and flat manufacturing harness.

How do I recover a Creo Schematics Design? Creo Schematics frequently crashes and when I try to reopen the design I was working on, I receive the error below. In File>Environment I have "Automatic design backup" checked and I set "save design information" to every 20 operation however the autosave folder for each project is always empty. It does show that a recovery file was created called recovery_9-11-2023_15-16-0.rcv but I don't know how to open it in Creo Schematics. I am using Creo Schematics version 8.0.0.0.    

I am trying to display wire endpoints in a section view of my cable assembly & only the centerline will display, Even when I exclude the harness.prt from the section view in the model it only appears when it is not behind a sectioned area.  Everything I find online suggests: Drawing View → View Display → Cable Display→Thick but that does not resolve my issue. Any help is appreciated! Thanks

Hey all, another what could be just a simple question. I have to insert 45 degree angled lines quite often and the only way I know how to do it is inserting a line close to 45 degrees, adding a dimension, then clicking and dragging the one end of the line to as close to 45 as I can get. 45 degrees doesn't need to be exact in this application but is there any way to do it easier other than adding a symbol or the way I'm doing it currently?

Hello, I want to create Geometry simplified representation by Creo 10 (I have very huge assembly and I do not need info about nested features/geometry from subassemblies). In the past in old Creo, was possible to create Geometry simplified representation. In Creo 10 I have found option: simprep_default_model_status graphicsbut is not working. When I create new rep, system always create only Automatic representationAny ideas how to make Creo faster for huge assemblies?Thanks, Vladimir 

i need this application for education

I'm trying to  apply a thermal load to simulate a bolt preload (a similar technique as it used to be done in Pro/MECHANICA) in a simple two plate model. To model the bolt I made a beam idealization that connects two rigid links at the bolt ends (one for the head and the other for the thread). I created a global material for the plates with 0 [1/°C] thermal coefficient and then another material for the beam with 1.2e-3 [1/°C]. For thermal loads I'm using a temperature load increase to 100C and fixing the rigid links. After that, I run the static analysis but nothing happens.  This is the first time I'm attempting this approach for bolt modeling, I'll appreciate any help to understand what I'm doing wrong. Attached is the zip file with the assembly and creo parts for reference as well as an image with some description labels.