CAD

I have a file with dozens of independent features that I want to create similar parameters for. I can export the XML data, but it does not contain the appropriate information to re-assign the parameters on import. Any one have any ideas?

Creo illustrate used as stand alone envirnomentIllustration  are created for PWI in Process plan.facing Two issues:Callout of illustration (PVZ files)  which are created in creo illustrate 9.2 are disappearing from pvz files when opened in illustrate 11.1.Unable to create custom callout in illustrate ill.1 Any suggestion on this.Regrards,Nishanth B E

Creo 9.0.6 Is there a config available to adjust what tab opens when assembling a part that has predefined flexibility? See the attached image as I'm using a pre-defined feature flexibility. When assembling and using that predefined I'd like it to open directly to the feature tab. I've had users completely miss the little (1) icon next to the text on a tab and not be able to find what to adjust. I understand that dimensions are the most likely to be used and that makes it a great default, but a little order of operations rule would be great here.

Need to create a section that combines a full section and a half section for a concentrically assembled assembly. Please refer "section.png" for detail info. Thanks in AdvancePrakash

How do you have the plus sign "+" be a subscript? Every time I try to subscript the plus sign, it just becomes an operator. But I want it to be part of the subscript.

Hello all, I'm trying to do a fit for the transient thermal impedance of a transistor based on a set of points that I extracted from a datasheet. At first, I tried to do a simple polyfit, but it seems that the fit can diverge to very high numbers or even go negative, which may not be acceptable in this case, since the thermal impedance is strictly positive.I tried to do a fit similar to the Foster thermal model, based on R and C couples of values, that is usually used in the thermal models of electronic components. For that, I tried to use the LeastSquaresFit function, but it doesn't converge in my case, script attached below. Could anyone explain the reason for the divergence ? Is it the input data or the way it is used ?In the case I try to separate R and C values to 2 vectors, should the guess vector be the stack of the R and C vectors ? The documentation of the function doesn't explain it in a clear way.Alternatively, in the case of a logarithmic regression, is it po

One of our users is experiencing issue with PTC Control Center not updating Creo and not being able to be updated. When trying to perform a fresh install of the Control Center is says we can't overwrite the current install. Tried everything from an IT stand point except a fresh install of windows. Any one experience this? Screen grab added

I'm designing a Isogrid geometry in Creo 10, but I'm having trouble with the Thicken feature. Creo allows me to thicken only one surface of this "box"—it doesn't matter which surface I choose, it always works for the first one. However, when I try to thicken a second surface, it fails.Does anyone know a fix for this?

Hi, I need instaling Mathcad 10 in another computer, please send me download link.Thanks

How do I get Mathcad to get from this:to this:without having to redefine f(x) myself?

I'm installing CREO 10.0.6.0 to use CREO Anysys Simulation, when I start it gives a flexnet version error, I've tried all possible versions and I can't get it to work, the license is for CREO 11, as shown in the print

Hi,Which software do you recommend for verifying bending moments and shear forces in a beam from Mathcad calculation?I use the beam calculator https://solveredu.com/en/beam-calculator/. It's generally good, but do you have any other recommendations?

I'm trying to setup the piping module for use in our company. In the line stock menu you can set user defined parameters but they don't show up anywhere. I need them to show up in the solid pipe parts.I have tried with the following test parameters and valuesPARAMETER                VALUEMAKE_FROM               A1612309TESTMAKE                  BBTESTPAR                      12 I have tried recreating the pipe after changing the linestock parameters. I have saved the line stock every time.Is there something I'm doing wrong here?

Hi All, What is the formula to stack the zcal into a vector and rearrange the vector up to the zcal value. Can anyone please advice?  

Dear All, Found the solution to stack and filter the vector to calculated value. I am looking for a loop or formula which I can calculate area under each section of the vector and then cummulate them.  

Hello, I have been having problems with saving/printing the file to pdf. Some pages come out blank (only header and footer is visible but not the content of the page) in pdf without specific reason. It does not happen in every worksheet, just some.Let me know what I can do with it.

When I open a big assembly, is there a way to open it clean without showing all points, datums, axis, coordinates ? See attach

HelloI have two issues:1. The system will not accept my product code so i cannot raise a support case.2. My laptop just got a new motherboard. I cannot get Mathcad to activate and i cant download a new licence as it says i have had too many.Is there another way to raise a support case?Thanks

I am on CREO 10.0.7.0 and I want to hide and unhide parts quickly by just pointing my cursor or at least clicking it. I was used to quickly hiding and unhiding parts with Tab and Alt+Tab in SolidWorks without even clicking anything.I tried H for Hide but it only works when part is selected on the model tree. If I have to go to the model tree, I might as well just right click and select hide.I tried these mapkeys below found on the community but they only work when selected from model tree. Is there a way to make them work when selected through the graphics area?mapkey hc @MAPKEY_NAMEhide the selected component;\mapkey(continued) @MAPKEY_LABELHide Component;~ Command `ProCmdViewHide`;mapkey uh @MAPKEY_NAMEUn-Hide the selected Component;@MAPKEY_LABELUn-hide;\mapkey(continued) ~ Command `ProCmdViewShow`;mapkey spo @MAPKEY_NAMESELECT THE NEXT LEVEL SUB ASSEMBLY;\mapkey(continued) @MAPKEY_LABELSELECT PARENT;\mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\mapkey(c

I used to use Mathcad on other computer. I use free Mathcad version only. Now I have new computer and want to install Mathacad again, but I cannot acquire new licence. Can you help me use the old one? How can I get it again?

I am a student and want to purchase the Mathcad Prime 10 Student version (the one for $63/year), but when I click on the link that says "Order Now", it just brings me to the "Mathcad Express Free Download", which is not what I want. I already have Mathcad Express, and I wish to purchase the student version for $63/year, because I am a student who needs Mathcad Prime. In other words, I have found no way to actually purchase/buy the student version of Mathcad Prime. Is there any fix to this to allow me to buy the student version?

I have a drawing template where I want to set up the layer display by view on some sheets. I am able to read in a layer setup file for the .drw top model and alter/save the display status. I have not been able to find a way to define within the template the view layer display status. Is this even possible?   There are 16 drawing views in the template where I need to control the layer display via the view so if I can set this up in the template it will avoid manual setup when a drawing is created from this template.   This is a capture from a drawing using this template showing the layer tree use for layer display within views. I want to access the views in the template to define the layers display in the template. Obviously, there is no active model when working on the template.    

Hi,   What is the symbolic engine used by Mathcad Prime (all versions greater or equal than 7)?   What is the numeric engine used by Mathcad Prime (all versions greater or equal than 7)?

Could not install because it would not accept my password or redo a new password to get a PTC.COM account.   Would not install MATHCAD PRIME 30-DAY TRAIL.   too many hoops and hurdles....

an unhandled exception occurred on the dispatcher thread comes and I cant write any math functions