CAD

Hi,I purchased a MathCAD license for MathCAD prime.I have an account, a customer number, a sales order number and a site number.In addition, when I download a summary of my license, I get a zip file with a customer number and a 13 character number.But when I need to install the license, I need to register a 14 character code + 4 +4 code.Where or how can I get the "product code" or a license file?Regards 

Good afternoon,Currently just joined a company that used Creo 7.0, so I am very new to it.  For the past 13 years, I have been using Siemens NX 2206 in association with TeamCenter PLM.  What would be the best Creo 7.0 self paced training to utilize in order to learn basic sketching, modeling, assemblies and drawings, preferably in that order?I can start a sketch, however I am having issues figuring out how to finish the sketch and add 3D features in order to create an actual part.Hope this makes sense 😂Thanks in advance.,Chris S

I have an iteration in a calculation that requires I select “Calculate” repeatedly until two numbers are relatively equal. Is there a way to automate this iteration so that I only need to select “Calculate” once?

I ran the same program in mathcad14 and mathcad prime10 through a converter, and it was slower in prime. Below is a program that seems to take a long time to calculate. I also got the following information: "The most efficient way to use computer memory when using matrices is to pre-allocate the matrix. To do this, assign 0 to the last element of the matrix. This ensures that there is enough memory for the remaining elements of the matrix. If you dynamically allocate a matrix by filling in the elements of the matrix from the smallest subscript to the largest subscript, it will take longer to calculate and the worksheet will calculate slower." But I don't know how to improve it. Can someone tell me?   Translated by the moderation using Google Translate -----------------------------------------------------------------------------------------------   mathcad14とコンバーターを通した同じプログラムをmathcad prime10で動作させたところ、primeのほうが遅いです。計算に時間がかかると思われるプログラムを以下に示します。 また私は次の情報を得ました。 「行列を使用するときにコンピュータの

Hello, I would like to get some help from you in order to be able to calculate the output voltage of an integrator OPAMP considering also its saturation.As it could be seen in my example that I attached, the output voltage will start decreasing from 0V with a negative slope, proportional with time. The negative supply of the OPAMP is -6V, so I would like to know if you could tell me please how can I upgrade my calculation formula with some logic in order to check if the output voltage is still less than -6V, then it should be calculated according to the formula, otherwise it means that the OPAMP is saturated and the output is staying at -6V? Thank you in advance! 

Hi everyone,I’m new to Mathcad Prime and have no prior experience with it. I’m currently looking for teaching materials or tutorials related to power supply design using Mathcad Prime.Could anyone share resources, examples, or websites to help me get started? I’d also appreciate suggestions on where to begin learning the basics of Mathcad Prime.Thank you so much for your help!

Hello my name is Bogdan. Help me plz How Download the Creo Trial and receive 14-day trial of Creo ParametricI visited the site https://www.ptc.com/en and created an account https://www.ptc.com/en/supporthttps://www.ptc.com/enhttps://www.ptc.com/en/products/creohttps://www.ptc.com/en/support

I am running Creo 9.0.7.0 on Windows 11 24H2. I am trying to import x_t files and it causesCreo stop responding and crashes. Here is my traceback.log file:   ------------------------------------------------- The trace creation timestamp is: 수 12 11 11:40:52 24 The executable build timestamp is: 월 11 20 21:36:19 23 The datecode is: 2023374 The pro machine type is: x86e_win64 The process ID is: 37268 The traceback type is : CRASH The logger exit status is: 00003 The Trail is: trail.txt.75 The release is: 9.0 The product version is: 9.0.7.0 The product title is: Creo Parametric ------------------------------------------------- Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 40172.    Pls help me! tysm

Hello,  We are on Creo 9.0.3.0. I can make a 2D Family Table no problem, but then I am stuck with the names of the parameter that include the underscore since a lot of names are muli-word, and cannot be named with any spaces.  I had THOUGHT that's what the Description field would be for...so you can just show that as the name instead of the actual name, BUT I cannot figure out how to use the Descriptions AT ALL.  fam.inst.param.description doesn't work, and I also cannot figure out how to even reference the description in Relations if that route is necessary to fix this. Next, I have Objects (They are Word docs) that disappear after saving, leaving, and reopening the drawing.  They are in the tree, and selectable, and even editable, but are not visible on the drawing or after exporting to PDF.  I was having similar issue for Images and ended up being a setting in config.sys.  Is there a similar one for Objects? Thanks 

Hi there , I'm trying to find the q values that correspond to levels values . Knowing that q was measured from z which include the levels values as well . like the example Thanks in advance 

I've encountered an issue in Creo. When placing components in an assembly, clicking "Placement" is supposed to show the placement box (as seen in the attached picture). However, even after clicking "Placement" multiple times, the placement box does not appear.Is this issue caused by Creo itself, or did I accidentally change some settings that disabled the placement box?Because at first, I thought the box might be displayed/appeared into another screen, but after I checked, there is no Placement Box at all. *Additionally, I noticed a similar problem in the Chamfer feature. The "Sets Box" does not appear either (refer to Picture 2).

MathCAD Prime 7.0 is where my company is still stuck at, but it still has the very frustrating limitation/bug of not accepting decimal numbers without putting a leading zero before the decimal. It allows you to do this when calculating a number, but not when using units. Has this been fixed in subsequent versions?  It is frustrating not only from the standpoint that I never put leading zeros before a decimal, and never have, never do on any other program/software, and it's not a problem at any other time on any other software package I use (including MathCAD Prime 7.0) UNTIL I try to use units in the calculation. I have hundreds of worksheets where I have not used leading zeros and it used to calculate everything just fine, even with the use of units.

I'm using MathCAD Prime 10.0.1.0 and having difficulty having a function complete a different formula depending on if a previous variable is either "Yes", "No" or "Blank".  The loop is meant to repeatedly calculate "b" and then determine if "b" is either a "yes" or "no", I added a blank option to allow the calculation to be skipped in a larger document if that section is left blank. However, it is just always registering the "b" variable as "blank".The answers need to be provided in a matrices format.  

Hi everyone,   What's the correct syntax for Creo 4.0 to stop throwing this error about profile-tolerance: unequally disposed profileresulting error   The underline appears as soon as the (U) symbol is put into the tolerance box.

HI, I’m having trouble generating NCL code for PostProcessor on the Mill turn machine. The machine is equipped with milling and turning heads as well as two spindles. I need advice on how to properly generate NCL code for both the upper and lower heads of the machine.If anyone has experience or tips, I’d greatly appreciate your help.

I need to open my Mathcad 15 files. I can't do it with Mathcad Express. Is there a way to work with existing Masthcad 15 documents.

Community, Why is the number of frames selection greyed out for non-linear analysis?  When trying to animate, there is no control to slow down the animation, as the animation moves back-and-forth rapidly.  Thanks in advance.

By a clone part I mean a fully dependant copy of a part that can be used in separate assemblies but if the original part is modified, the clone part can be updated automatically, And if it is possible, can be assigned a different material to the clone?

Hi  I want to plot numbers from a table along with a function. But - if I select for example Row 2 and Class C, I want NaN to appear, i.e no value at all in the plot. Is it possible to incorporate NaN in a table? Or is NaN not applicable in this case? How can I solve this?   Worksheet attached (prime 7). Thanks in advance!         

The latest version of Mathcad is 10 but my company uses version 8. So will it be possible for me to download the 8th version of mathcad.

working on a table with a long list of items. need to query the table to see if an item is listed without erroring out every time.   how can I check to see if "Black" is on the list and return a "N/A" or something I can use? Any help will be appreciated.  Ed.

Is there no way to have a master material, say, Al6061 applied to multiple parts?If I update the master material all the parts that were already made with this material do not get updated. So now to enforce the master material I need to manually select and re-assign the same material......Surely there's a way of making the Library a reference for said part(s)?

I have received an academic license for Direct Modeling (see below).  How do I download Direct Modeling?I DO NOT want:Direct Modeling Express"Flexible modeling" tab within Creo ParametricEducation e-mail support asked me to open a support ticket, but I don't have an account with a high enough access level to open a ticket.Thanks for any help! Spoiler (Highlight to read)#---------------------------------------------#License Pack for Session ID xxxx#--------------------------------------------# PTC License Pack#License codes for PTC Product.######### Creo Direct Modeling Education (Schools) ##########Feature Line Type = INCREMENT#Feature Name = CREODMA_Schools3#Feature Version = 42.0#Version = Creo 11.0#Number of Copies = uncounted locked license#Supercede = Y#Issue Date = 28-NOV-2024#Expiration Date = 29-NOV-2025#Node Locked Option = Pro/ASSEMBLY#Node Locked Option = Pro/FEATURE#Node Locked Option = Pro/INTERFACE#Node Locked Option = WLO#Node Locked Option = Pro/SURFACE#Node L

I get this message when i try to configurate my floating license "Failed to configure license for PTC Mathcad Prime 10.0.0.0: '.', hexadecimal value 0x00, is an invalid character. Line 6, position 1" and i dont know what to do? It does not matter what i type, i just comes with that message 

Creo 10 It seems like when I display hidden lines some of them appear as blue dashed lines when they should appear as gray dashed lines.  Why is this occuring?  How can I fix this?   I have already tried editing the line style to Hidden and still they appear as blue dashed but when printing follow Geometry line style.  I can change the hidden line pentable settings and they only effect the gray dashed lines.    Below is the drawing in Creo: Blue dashed line and gray dashed lines are both hidden items in the view. The gray hiddens lines appear correct when printing, but some of the hidden lines appear as blue dashed lines.  This is cuasing issues when printing.  The blue dashed lines follow the geometry pentable settings but as dashed lines.     Below is Print Preview - using pentable  - You can see the gray hidden lines appear correct and follow the pen table settings, while the blue dashed "