CAD

i already did a topic about this, but im still have the same problems the path only works on the first try after i change it. But on the 2nd inicialization doesnt work anymore, i dont know what to do anymore.maybe its something in my config search_path_file $CREO_COMMON_FILES\ifx\parts\prolibrary\search.protemplate_new_ecadasm $PRO_DIRECTORY\templates\inlbs_ecad_asm.asmtemplate_boardpart $PRO_DIRECTORY\templates\inlbs_ecad_board.prtsearch_path_file $CREO_COMMON_FILES\afx\parts\prolibrary\search.prodrawing_setup_file C:\Users\Nicolas Santos\PTC CREO\Geral Caterpillar\(Loc)Start_files\Active Drawing_REV.dtlformat_setup_file C:\Users\Nicolas Santos\PTC CREO\Geral Caterpillar\Folhas\mfgtb-c.frmmdl_tree_cfg_file C:\Users\Nicolas Santos\PTC CREO\Geral Caterpillar\(Loc)Start_files\tree.cfgpro_font_dir C:\Users\Nicolas Santos\PTC CREO\Geral Caterpillar\(Loc)Start_filespro_material_dir C:\Users\Nicolas Santos\PTC CREO\Geral Caterpillar\Biblioteca_elementos\Materialspro_plot_config_dir

Does anyone know/have a downloadable Mathcad worksheet that calculates all the major, minor, pitch dimensions, thread shear areas, tensile area (root and effective), etc. for a METRIC thread?  I've found several metric thread calculators that are strictly web based.  One would think that surely someone has created a Mathcad version for Threads based on how integral threaded fasteners are engrained in engineering projects.  I hate working in Excel due to the difficulty it has in checking/tracking all the formulas.  Mathcad is the way to go, especially when outputs of the threads are typically inputs later on in the Mathcad design document. Many years ago in my engineering career, I created an Imperial thread worksheet/template which spits out all the dimensions, thread shear areas, root and effective tensile area, etc. taking into account thread class and everything else based on ASME B1.1 (?).  Served me well over the 2 decades.  Unfortunate

Hi, Is there any option to restore drawing in my workspace, I checked out the drawing from the server and this overwrote the latest in my local folder (there isn't any warning for that!!!)?

I have installed Task Manager on top of Model Manager, and everything seems to be working fine. I am a beginner in this area. I have assigned 3 tasks to the Task Manager, and I would like to know how I can see if these tasks have been completed. For example, where might it have saved the step conversion job once it is completed? Thanks.

In these days, We are making a custom viewer using Creo View WebGL ToolkitCustomer want to see 3D model using Shaded with Edges render mode.Is it possible to set Shaded with Edges render mode using Creo View WebGL Toolkit?https://www.ptc.com/en/support/article/CS338147There is no solution for this.Do we have a plan to make it?

I have reinstalled creo and am getting a display error or have set something incorrectly...The computer should easily fulfill the system requirements, i have already reinstalled it several times and restarted the computer but without success...can someone please help, screenshots and video are attached Thanks in advance

I am using Creo Parametric Release 8.0 and Datecode8.0.4.0, there is some unexpected exception happended with following code,I.m sure that the .prt I got from session is valid.My finally purpose is creating a new pfcTransform3D and setting the matirx data, then call this api to change view in window.//Get Current Mdl From Sessionvar session = pfcGetProESession();var part = session.CurrentModel;if (part.Type == pfcCreate ("pfcModelType").MDL_PART) {        var pfcTransform3D = part.GetCurrentViewTransform();        //below code cause an exception (pfcXToolkitBadInputs)        part.SetCurrentViewTransform(pfcTransform3D);}

Hello, I would like to to override a few items in a BOM table and keep all the items programed.  I have the following code entered but its not working, I would like "XX" to be renamed to the actual part name "HEX BOLT" Are there any specific settings I need to review?Does the type need to be defined, if so where do I do that? The view contains an assembly with a simplified rep. I'm using Creo 7.0 

Modelcheck can currently check for component states including: suppressed, flexible, failed, missing, etc., but it does not seem to be able to check for hidden (that is, not displayed) components. Please refer to the attached picture.

I have purchased the Mathcad prime student version 1 month ago. But didn't receive any email that contain activation code or anything yet. I already sent an email to euroa@ptc.com . but still didn't response anyone. What should I do?

Hi everyone, I’m implementing Lateral Torsional Buckling (LTB) calculations for beams using the Finite Element Method (FEM). My approach involves formulating the problem in matrix form, starting with the Elastic Stiffness Matrix and then the Geometric Stiffness Matrix. However, I’m encountering a singularity error when using the eigenvals function. I’ve attached the Mathcad Prime 9.0 file for your reference. I would greatly appreciate any help or insights you can provide. Thank you!

Hi!  For a few days ago i have upgraded my Creo Parametric 3.0 up to 4.0. When i try to open it, it says that quality agent could not run and all crashes. I have win 10 and M020 version of Creo if it has something to do with the issue.

Hello,  I was wondering if I could get help with a VBS script to export bolded text with an equal sign from a Mathcad file to a cvs/txt file  An example of text to export is Val1 = 1 and Val2 =2  would print to the cvs/txt file as                Val1,”1”                Val2,”2”While the remaining text would be ignored.  Attached is a vbs script that gets all of the text from a Mathcad, but I need to add a conditional that will only print text if it is Bolded and has an equals (=) sign.I cannot work on this at work since running scripts is blocked and I am working on permission to run this one. 

We are using Creo 8.0 and want to add a header row to our BOM table which includes the part number - in our case this is the parameter MATERIAL.  An example is attached.  I have no problem with the BOM/repeat region part of this.  I can easily add the part number to the header by changing the text in the header cell to: ... &MATERIAL.  The problem comes when I want to save that table and have others use it on their drawings.  As soon as I enter: &MATERIAL, Creo adds the session ID &MATERIAL:#.  If I then save the table and put it in another drawing where the session ids are different it comes in as material:#.  If I make the table in a part, it saves the table input as &MATERIAL without the session ID but then I can't have the BOM repeat region I need.  I have tried it both with and without additional text in the header:  BILL OF MATERIALS FOR: &MATERIAL versus just &MATERIAL.  PTC says this works to spec and the

I'm using Mathcad 8.0. I have the following table of data from a colleague.I want to build this table of data in Mathcad. Then I want to pick from it for downstream calculations. In other words, downstream, if D/2h is specified as 2.8, I want to pick K1 from the table as 1.27. How do I do that? An added step would be to linear interpolate between data points on the table. In other words, if D/2h is specified as 2.5, I want to interpolate K1 from the table as 1.13.

Hello,I want to automate the drilling process using XML – I am using UDFs to create holes and I want to add XML for drilling and threading. When I do this, I have, for example, 10 holes and 10 annotations with XML. In Process Manager, I call them, and even when I check AutoMerge, it inserts 10 drilling and threading operations instead of one merged drilling operation and one merged threading operation that would include all 10 holes in two operations instead of 20. I found this video (17:30) where it works, and I am not sure where I am making a mistake.https://community.ptc.com/t5/Creo-Parametric-Tips/Mfg-Automation-Tips-Techniques-Session-Recording-West-Coast/ta-p/820680 

Hi everyone, I have a question. I have attached a DWG file below. When I open it in AutoCAD, I can see the view and annotations. However, when I open it in Creo, the annotations and drawing view are not showing. Does anyone have a solution for this? What settings and configurations are needed to open a DWG file in Creo?   The DWG file is a 2013 version of AutoCAD.   this is in AutoCad and this is in Creo    

How to add this type of expression in Mathcad. 

Hello, can't find the download link according to thisArticle - CS401112 - Creo View 10.1 and Creo Illustrate 10.1: Important information about this releaseon the PTC Software Download - Choose Product Family i want to download Creo View an Creao View Toolkit  

Hi All,   I'm quite new to customisation using web.link. I have a customisation that is very close to doing what I need, except that I cannot work out how to trigger a certain option. I have already worked out, from the documentation that the pfcModel.ExportIntf3D() instruction will use the default export profile for the export settings, which is OK. I can control this easily with our setup. However, when exporting manually there is the option "Customize Export", a check box in the "Save a Copy" dialogue box. If I use this, I can export my assembly with the origin point set to a coordinate system of my choosing. How can I either invoke this dialogue or set the origin of the export to an existing named coordinate system (e.g. "export_csys") in the assembly? Is this possible?  

Hello all, I am having issues with incomplete boundaries formed when I apply seperate mesh parameters to two parts. This mesh size difference is required due to the size of the part and fluid transfer taking place in the pipes (it's a cold plate).This incomplete boundary means that there is almost no thermal transfer between the two parts as the meshes don't actually touch the majority of the time. Both parts are meshed with different parameters in both relative and absolute terms but with zero minimum cell size, and done via 'update', so my belief was that they should follow a common boundary. Is there a technique I should use to ensure consistent boundaries with the seperate mesh parameters? Below are a couple of images. The X-section shows a clear disconnect between the two meshes, and the coloured plot shows the blue general boundary that has suceeded between the two parts.  Any help is greatly appreciated, as I have spent many hours trying to solve th

Hi there, How can I draw the lines with specific points... in pervious thread we draw them each 200 m >>> Can it be drawn in specific distance using these values ( using the metreage values)I tried to change the markers  and then I need to find the distance between these new lines and all the (Se-CPTs) points .  the distance between  the green point and the nearest metreage line And then showing them in a plot .BTW>> I start using mathcad prime 10Everytime I struggle in mathcad I say I will do it myself , but it is new concept eachtime and I can't reach what I need without your help. Thanks in advance. Yusra  

How I validate my stress results of creo by analytical means?

I am using the creo 3.0 version of the Tolerance Analysis Extension，How do I customize an html report for Tolerance Analysis Extension，Add a dimensional chain to the report similar to the 3D model in Creo EZ Tolerance AnalysisTolerance Analysis ExtensionCreo EZ Tolerance Analysis-1Creo EZ Tolerance Analysis-2

I’m wondering if it’s possible to perform FEM simulations with the student version of Creo 11, specifically for lattice structures. Does the student version support this type of simulation? Also, is there a way to export lattice structures from Creo to Ansys Workbench for FEM analysis? Standard formats like STEP and IGES don’t work for transferring these detailed structures. If anyone has experience or knows of an alternative method for exporting lattice geometries to Ansys, I’d appreciate any advice!