CAD

Creo Parametric 7 I have a table pattern with 3 members, the third member is failing but I have not been able to root cause the failure. The pattern regenerates when only varying the angle dimension (ROT DIR 1), when I add the linear dimension to the pattern it is failing.   I am looking for options on how to determine what is wrong. If anyone has suggestions for diagnostics or can see the issue, chime in.     Creo 7 model posted for review.      

I've searched everywhere and can't find the product code anywhere

I am using Mathcad Prime Release 10.0 and Datecode10.0.0.0Experiencing difficulties with variables not working as expected.Here are the errors that I facedMy version 10.0 will not recognize the unit once it's defined on the right side of equations..Can you help?

How do I use the flexible modeling move command to rotate surfaces?  I can move them linearly, but how do I rotate them 90 degrees?  I am using CREO 10.

Hi Guys, How do I change these values? I've seen a post saying its Linear_tol, but this doesnt seem to change anything. now that we are testing out MBD, I'm noticing that in 3d these are not what I want shown for tolerances.  I want it to match my 2d drawings as:.xxxx =+-.0005.xxx = +-.001.xx = +-.005.x = +-.01 This is what Ive tried added to my config,pro with no luck in changing this. Im assuming my formatting on the config is not correct?    

HelloI know Pro/ENGINEER 2001 it's an old version of Pro/ENGINEER (24 years old), but sometimes people get nostalgic I'm wondering if anyone has the installation disks for Pro/ENGINEER 2001 (Win_95 and NT) to share with me.The legacy versions are no longer available for download from the PTC website, so I'm reaching out to you ProE fans. I know there are good people out there who still own/have these installation disks and are willing to share with me.Thanks everyone for your support.

I'm using creo 10.0.2.0. I can't get basic layers to work consistently and am not sure why... So, I created a sketch in the model. I want to show up in my drawing, but be hidden in the model. So first, I create a layer called CS_Measurement and add the sketch to it. Then I hide it in the model. Then i go to my drawing. I select my Left_10 view so i can control that view independent of all else. I click on CS_Measurement, and the red dotted line appears as a preview. Then I right click on CS_Measurement so I can unhide the sketch, but...... Apparently it's already unhidden because it gives me the "Hide" command only... Except it's not unhidden because it's not showing up in yellow like it should when i click away.so maybe i have to expand the CS_Measurement layer and unhide the sketch itself. However, the only option presented is "Unhide in Model". But I don't want to do that... I just want to unhide in that drawing view every now and then, ill try unhiding some things, re-hiding o

HiExcel is great for condensing information in a small space so when I have multiple input variables (+50) to my mathcad file I read those from an excel file. In MathCad 15 this excel file could be open and editable while mathcad was still able to read the values which allow for a very efficient "trial and error" workflow. (change data in excel - press ctrl F9 in mathcad. Review result and repeat as necessary) In Prime I have to close the excel file between each recalculation of the mathcad fil - do you know of any workaround or fix to this ??

Hello  I wanted to know if there is any setting where we can turn off the windchill online workspace in one creo (i.e. work offline), and simultaneously work online on windchill workspace another creo. I am using creo 4.0. I know it was possible previously in creo 3 but is there any way to copy the same funcationality in creo 4.0? I would appreciate your responses. 

Hi Community,(Creo 10.0.4.0)I'm setting up templates for new drawing templates and want to have a field in the title box about the export file name:1-00001234_01.stp<Part_numnber>_<Version>.stp&<parameter_name>_&<parameter_name> It looks for parameters the underscore "_" is breaking the definition, it needs a separator. What is the correct way to combine two parameters without space or with a character?Is there any markdown available for Creo tables?

"Theory and Problems of Electric Circuits", 4th edition. McGraw-Hill Companies is also very good text I found in Academia.edu. In chapter 7 it shows the impulse response of RL circuit. Mathcad Prime 10 shows it, I also stand with Mathcad side. Another is unique problem and answer of this book.    My Mathcad Prime sheet shows the answer clockwise current by blue line. Red plot is above answer of clockwise direction. Challenge it.

Hi, I am experiencing this same issue. The Drag tool notices the Clash and pushes the object. When I run the analysis, it ignores this push option and just goes right though the object highlighting the clash.   Is anyone at PTC looking into this issue?   Reference topic: https://community.ptc.com/t5/Analysis/Mechanism-analysis-doesn-t-recognize-collisions/m-p/701254#M8347 

I want to create a template in Mathcad with a table in this specific format. I've been trying but haven't been able to find the exact method to achieve it. Could you suggest any workarounds or solutions for this?   

You have reached the maximum number of license requests available for your product type when I have a 30 free day trial

I have a user asking if it is possible to add multiple models (not a family table) to a drawing and then create a drawing table to list all of the models associated with the drawing. Their idea is to add a drawing table that lists all of the models associated with the drawing and the model's lengths.  Example: Hex bolts with different lengths but bolts are individual components and not in a family table.  When a bolt is added, the table automatically updates. Let me say that I do not agree with doing things this way, but agreed to check into it for them.  In my opinion, the drawing should revise each time another model is added. We are also using Windchill.

I have a parametric startscript and i it is creating a creotk.dat for the toolkit usage.Now i have a second toolkit which iam writing in the creotk.dat.Now i have the problem that i cant start the second one. It is loading in it but cant start with the message in german:Initialisierung des fremdsprachigen Programms "Name" fehlgeschlagen: Fehler PRO_TK_GENERAL_ERROR.I wrote the text also in the creotk.dat which already exists. Environment variable PRO_COMM_MSG_EXE is already implemented. How can say in my startscript (Powershell) that he has to implement it to parametric? 

When creating the balloons, some of them end up overlapping, or even being left out of the spreadsheet, and another scenario is that, when creating the balloons in some views, you end up taking geometric references that are not visible in that view..

HelloI don't get a download email. On the emails I get theres only that trial resources link.Can you please assist?

With Creo+, you can get all the benefits of Creo delivered via SaaS and gain access to cloud-based tools to enhance collaboration, improve accessibility, and simplify license management. The February 2025 Creo+ release includes more than 50 enhancements to improve everyday design productivity. Creo+ is now easier to use, with improvements to area selection, design items and quilt/body trees, spotweld enhancements, and curve-through points. Composites now includes reference laminates for easier manufacturing, and solidification performance is faster and more robust. Model Based Definition (MBD) has been improved to comply with the latest ISO standards, and simulation tools have been updated with the latest Ansys solvers. Finally, start-up performance and license management have been improved. Now more than ever, Creo+ helps you deliver your best designs in less time.  Check out the release notes to learn more about all of the e

MathCad 14 wurde nach einigen Monaten Pause mal wieder gestartet.Es erscheint folgende Fehlermeldung :Die von Ihnen angeforderte Lizenz enthält einen FehlerInvalid HostThe hostid of this system does not match the hosted specified in the license fileFLEXnet Licensing error : -9,57Click auf Weiter – Der MathCad Lizenz-SetUp-Assistent wurde gestartet.Zuerst habe ich den Speicherort der Lizenz-Datei neu eingegeben.Kein Erfolg, MathCad stoppt mit demselben Fehlerhinweis wie oben.Ein Vergleich der Lizenz-Datei mit einem BackUp ergab Übereinstimmung.Dann habe ich den zweiten Schritt versucht :Eine Lizenzdatei über das Internet anfordern mit meinem Produktcode :JW140807xxxxxxxxxxxxxxNach Anmeldung an meinem PTC-Konto und Weiter kommt folgende Fehlermeldung :Unerwarteter FehlerDer Remoteserver hat einen Fehler zurückgegeben : (403) UnzulässigMehrfache Wiederholungen führten auch nicht zum Erfolg.Was ist da los ?Das System lief seit der Installation in 2015 unter Windows 10 einwandfrei !Mit freu

I'm going thru the hole files editing the notes and customizing them to our needs.  I got to the NPT and NPTF hole files and started looking thru the .hol definition and noticed there was no information for the DEFAULT_CALLOUT_FORMAT_DATA section.  However, I'm getting the note as defined below. I'm wondering where it is getting this data as I'd like to edit it slightly.  I've looked that all the possible locations a .hol file could be and don't see where it could be getting this callout data. Our hole_parameter_file_path config option is pointing into Windchill and the callout data is not defined in those files.  I looked in the <loadpoint>\Common Files\text\hole location as well as my creo home location and the NPT and NPTF hole files do not exist there. Creo 8.0.0.0Thanks...  

Good afternoon.I recently updated to MATHCAD PRIME 10 and started to work.This morning I realized that when a file created with the PRIME 9 is saved in PRIME 10, this cannot be opened again with the version 9. One of my office colleague receiving some work pointed me out. I honestly thought that when the PRIME versions came out files could be saved  and opened with no problem. It was like that until MATHCAD 15.I tried to install in parallel MATHCAD PRIME 9, to redo the work from PRIME 9 version, but it doesn't work.Is anyone in the community encountered this issue and is there any work-around solution? Thanks in advance for the help. 

I used this function to specify which matric is the longest , which is c in row 3 >> this is  correct   Now I need it to read the bigest number in matric c which is 78 >>> what function should I use and can it be written with the same g function I used ? 

I am using Creo Parametric Release 11.0 and Datecode11.0.2.0When creating a milling step with complete machining extension, the tool name (created in tool setup) and step name (named in the construction tree) do not appear in the NCL file (and then in the ISO code for the machine).

How can i make my formats save in the template, i always make all the work, save the template but when i go open, dont have any format in there, i dunno what to do anymore.i already save as template as drw, notting works, i think i am broke thats why i have so many problems in the creo.funny that one of them saved as i wanted