CAD

Hello, I am using Creo Parametric 9.0.8.0 with Windows 10. I have an odd case where it appears that Creo is measuring the volume of a part wrong. The volume output from the mass properties dialog box is showing a value of about 0.306 in^3 as shown in one of the screen shots. However, this way underestimates the volume of the part. Just the main portion in the middle can be hand calculated to about 0.7 in^3. I don't know what is wrong here. I have tried regenerating the part and swapping to fully assigned properties and then back to geometry defined, but the number does not change. Any insight is appreciated. Thanks, 

Not much fun doing detailed drawings.  I remember doing detail drawings in the early 90's on Pro/ENGINEER and being able to select 10+ drawings into memory all at once.  Does anyone know what year we lost the ability to load countless drawings?  *not that it's a big deal just being nostalgic LOL Bart Brejchadesignengine.com 

First and foremost creo lags so much on a brand new computer. Yes i have read the post where it says just write -g:win32_gdi and yes it fixed the problem with the lagging. It works crisp with that setting. But the model colour is all dark grey and unusable. And the fix to that is to remove -g:win32_gdi. Can i have a crisp program with correct colours and graphics at the same time?

I am using Creo Parametric Release 9.0 and Datecode9.0.5.0In a coordinate system, the three transformations and the three rotations are displayed as dimensions by default.Double-clicking on the coordinate system always displays all six dimensions, which can lead to errors such as selecting the wrong dimension.Can I hide the dimensions that should not be changed?

Hello everyone,I hope you are doing fine!I recently calculated concrete bending stiffness using Mathcad Prime 8.0.0.0.However, when I was writing an equation, I got the message "These units are not compatible" in the Composite Bending Moment Equation.Can someone please help?I attached the full calculation below.Thank you in advance!

Hello, I received a message in German saying that the mass properties are outdated. In subsequent processes, I always receive a similar message.Can someone explain how to fix this?Is it possible that some configuration has changed and can no longer be used? I dont want just to hide the notification.The Startparts are created in Creo 10.0.3.0 and am still using it.I activated the mass_property_calculate and changed but its not solving the issue.  

Hi, Mathcad Prime 10. So I have made this combo box to choose concrete value from a dropdown menu. I have defined all the value for a concrete class:I then choose to hide left side, so I only have the input. It works super great! The problem is, that since I have defined all the values from the tabel, I cant pick anything behind the equation. If I click here:Then I hit the drop down menu behind:This makes it very impractical. To make space on top or below will not look good, and be confusing for the user. Is there a way to work around this? The method is a upgrade from our old calculation where combo box was not a feature. Before we just had a matrice with callouts like this:I could go back to the old solution, but I just really wanted to impliment the new feature, because it is so much nicer to work with.  Hope someone can help. Thanks. 

Mathcad Prime 9Is it possible to define the text for axis or traces annotation/labels as variables? If I define a variable X_axis_title with the value "Measurement" and try to copy-paste this variable into the title field of the X-axis, it will be handled as plain text "(@LABEL VARIABLE X_axis_title)". Goal is to show "Measurement" as annotation and have the possibility to change this in multiple diagrams at once.   

Can anyone guide me & help us to solve this.

I can't get a 30-day license, it says I've used up all my attempts, but it's my first time installing the app -----------------------------------------------------------Translated the topic from Spanish to English using google translateSubject - No puedo obtener una licencia gratuita por 30 diasBody - No puedo obtener una licencia por 30 dias me sale que ya agote los intentos pero es mi primera vez instalando la aplicacion-By Community Moderation Team-----------------------------------------------------------

After creating sheet metal parts on Creo 11.0.1, the wall thickness of sheet metal is set to read-only, so it can't be modified. I've already reported this bug to our distributor, but they said there is no solution right now, or return to old version. Is there any solution please share.

In these days, www.academia.edu shows me a lot of contents of electrical engineering. I am interested in one book, "Circuit Analysis I with MATLAB® Applications", Orchard Publications. The top cover page shows this circuit problem. It may be the best question of this book that Matlab can use to solve it. I try to solve this one by Mathcad Prime 10. I am standing Mathcad side. So, try and Challenge it!

Prime 10 I'm trying to use Mathcad's symbolic calculations, and it is not simplifying my expressions properly.   See below for an example: if I use the full equation, it does not simplify anything inside of the parentheses, but if I separate that section out and calculate it as its own entity, it simplifies everything correctly.  Why is it simplifying if I split it out, but not if I have everything together?What steps can I take to get Mathcad to fully simplify the full expression?Thank you

Hi  I want to write a function for how the weight changes along depth. I have attached a worksheet (prime 7) which describes what I want to achieve.  Thanks for all support! 

I have a perpetual license to install MATCAD 15. But since the file was attached to an MSN hotmail email, it disappeared along with the hotmail. How can I reinstall MATHCAD 15?

 1234  

Hello, I am looking for help. My creo license was working fine 5 days ago and suddenly today i cant even get to the installation software on the PTC website. I had to re-install my creo parametrics because it was crashing every time I put my license key in.I would be grateful if someone could help me as soon as possible. 

I am using Creo Parametric Release 8.0 and Datecode8.0.5.0I would like to change the bend_order table note information in the drawing. Is it possible?

I want to view a model as a wire frame with hidden lines in Creo View Express, but with black lines rather than the kaleidoscope of colours the model is in when I open it in Creo View Express. I've tried following the instructions on this help page:https://support.ptc.com/help/creo/view/r9.0/en/index.html#page/creo_view/visualization/shared/To_Edit_Color.html#wwID0ECMGS I've selected everything in the model .A Model Parts tab appears on the ribbon, but there's no Color tool on the toolbar. The model I'm opening comes as an edz file.

Is there a way to pan my view of the model left/right/up/down using the keyboard in Creo View Express? Is there a way to rotate using the keyboard? I've found out how to zoom using the keyboard (Ctrl + for zoom in, Ctrl - for zoom out) but panning and rotating escapes me.

Seems that the Product Code has been missing in several post here. Is there anyone, who has actually managed to get the Product Code? 

The Connection Analysis tool allows me to check for how surfaces connect with each other. I can analyze a quilt and look at the edges between surfaces to see if they match up in position, tangency, curvature and acceleration. the last three are quite obvious. Wheich edges are tangential and which are not? But the first one is a bit strange. If I have a quilt, and no one-sided edges, and it can solidify, obviously it's a closed quilt. But I can still analyze it and see that it has edges with a position error more than zero. It may even have edges with a position error more than the accuracy of the part. You'd think such a thing would cause problems, but it doesn't, necessarily. Creo still highlights the edge as two-sided and I may still solidify the quilt. I'm guessing Creo is checking the edge of one surface against the corresponding edge on the other and looks at the difference, and due to the inexact nature of the mathematics here, it's not going to be exactly the same. The

  Mathcad Prime (MP) 10 starts to become unusably slow after switching between Mathcad and other applications (even Character Map or its own windows (eg, right-click context or worksheet list drop-down).    It usually manifests as unresponsiveness after switching back to Mathcad from another app.  Mathcad will freeze, unfreeze, and then freeze again before resuming normal service.  At the moment, though Mathcad is just cycling through freezes and won't let me do anything (including saving the active worksheet).   It seems to happen quicker when I have multiple worksheets open, even if those worksheets do not require saving or have any edit actions that might need undoing.   It happened in the initial MP 10 and in MP 10.0.1.0, but I've noticed it more in MP 10.0.1.0.     Stuart   Edited to add:  My Dell laptop doesn't appear to be overly strained during these freezes.  

Is it possible to call input from other mathcad sheet?Like in the first one we have the input and the second sheet has the equations. With out the need to repeat the data in the second sheetCombining/merging both of them without the need to repeat the data thanks in advanceYusra

Is there a way to pan my view of the model left/right/up/down using the keyboard in Creo View Express? Is there a way to rotate using the keyboard? I've found out how to zoom using the keyboard (Ctrl + for zoom in, Ctrl - for zoom out) but panning and rotating escapes me. I've tried searching the help and even Googling, but I can't find the answer.