CAD

I recently switched to CREO 10 and the start_model_dir and template_### in the config file don't seem to work.  When I start a new part, with the use default template option picked, a "New File Options" screen pops up and my templates are not there.  If I browse, it goes to the "start_model_dir".  Is it going to be like this all the time?  This opens up the possibility of choosing the wrong template.  It leaves with questions: 1) Why didn't the new part use the template that is assigned in my config file when the "default template" option is chosen? 2) Why aren't my templates shown in the "New File Options"?  Why do I have to browse?

WF3 JLink questionHow do I add relations to the "Post Regeneration" section of the relations? -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>

I have a 3D PDF that I received from the supplier. Is there any way that I can open it in Creo Parametric, similar to the Step file. Would it be possible to save that file in Creo Parametric?

Would it be possible to open a 3D pdf file saved as a pdf in Creo?

HelloDoes anyone know how I can get material to show up in a title block? I'd like to see the material assigned to a part in the drawing.i couldn't find the parameter for material.Any assistance is greatly appreciated!  

I am using Creo Parametric Release 4.0 and DatecodeM140we are trying to create a ordinate dimension but the problem is the dimension is not created from the actual witness line, is there any possible way to move the witness line using Protoolkit.

We have been tweaking our config.pro lately, adjusting settings which we normaly set by hand.   So one setting is the comp_assemble_start, which we have set at contrain_in_window. When adding a new component to an assembly, this setting will show a new window for that component.   But the component is not being shown in the main 3D window. We have to click the button "Show component in the assembly window while specifying constraints"   So searching for more config options, I encounter display_comps_to_assemble, which we have set to yes, but nothing happens. It seems like Creo is ignoring that setting.   Does anyone know how to fix this?

Hello, Following video will highlight Generative Design behavior when setting Total_Load_at_Point to the value "Rigid" or "Deformable" .    

I need to import several STEP files exported from PTC Creo.Currently all imported objects have a very long name similar to this:63BA2014C78DEC881B086CFF8F77897FA0C680C8|:|B8A4396250C5687B1D31E70758B30729E1AC4426I did find this option "Over-ride with explicit user defined names" in the manual here:https://support.ptc.com/help/creo/creo_pma/r11.0/usascii/index.html#page/data_exchange/interface/step_export_profile_and_config_options.html#I assume that would give me actual names when importing. Unfortunately I did not find any information on how to set user-defined names inside Creo. Any information on how to do this would really help me. Thanks

Good morning is possible to insert a family table file of an exiting profile in AFX?

Hello, I have an error in creo view, when I open it. As it is in Portuguese. creo view lite has reached its memory limit and sewra has closed use a product version with the massive mount license option to view this data . We did the tests on another machine and it was normal, I already removed the program, I restarted the machine and nothing

Hey  I would have a small problem. Is it possible to show the variables and their values ​​in the equations? The red box in the picture below is what I mean. So it was done manually. ("Text Box"). I used MathCad Prime 10. 

I am trying to create a curve between two points(3D) on a surface that should trace the Manhattan distance instead of an Euclidean distance. How do we achieve this in Creo 9?I have already tried the "Curve through Point and Direction" option and it doesn't work for my case as it requires additional direction reference. FYRI would appreciate it if anybody could help. 

Dear community, I turn to you once again hoping that with your generous assistance, we can resolve the following issue. I want to compare two groups of values, M and N, both of which may have variable ranges, denoted by i and j respectively. The resulting group R should have the same range as M and should take the corresponding values from N, in this case, the value of Nj that is less than or equal to Mi. I am using Mathcad Prime 9.0.0.0. and I have attempted to configure several programs to achieve this without complete success, but I believe I am unable to set it up with the correct syntax to achieve the desired result. I am attaching an image for clarity, in case it may help. Thank you very much in advance for your support. Germán 

To get the a part volume, in LISP we can use the function(sd-call-cmds(get_vol_prop ...Is there a way to have the total surface area of a part? I am using PTC Creo Direct Modellin v20.5.

Does anyone have a reference , any link , a video etc.  on how to use parameter option as a variable selection in sensitivity or feasibility analysis in Creo BMX   

In Creo 10.0 and above, when converting stp files, am I not able to set the coordinate system?Please let me know if there is a way to set it with the coordinate system I made 

Hi, i don't speak english butI want to limit the values in an arrayMathCad Prime 10Please help me

Is it possible to import datum points  in Creo model  stored  in .pts format file using Creo Toolkit C++ Programming. Which functions and libraries can be used to import it. TIA.

I would like to create a parameter that stores the previous part number or name of the part that the part was saved from.  For example if I have a part "Gear1.prt" and I save as to a new part "Gear2.prt" I want to store a parameter when doing a save-as that says "Gear1".  That way users that perform a save as automatically have a history of where this design was made from.  It can be useful when going through a parts history.   I don't want to make it a type in parameter because users would forget to add this information. Does anybody have any insights into how this could be done?  

The Creo Parametric software is multi-cad. Which extensions does it open natively?Is there a document that shows this?

Hi Guys, Im running a simulation that is running based off of the subassembly sets of heat load and convection boundaries. For example:Assembly 1 has 1 heat load, with 7 conv boundary conditionsAssembly 2 has 1 heat load with 4 conv boundary conditionsAssembly 3 has 1 heat load with 3 conv boundary conditionsthese Heat loads and convection boundaries were added to the sub assemblies, the new assembly of these 3 has not had any additional heat loads added. how do i run a thermal analysis with all 3 heat loads working together.  It seems like the only issues are the 3 heat loads. The convection boundaries seem to run fine. It wants me to choose a single load set for the new assembly. It will not allow me to use all 3 load sets at once.  

Hello PTC Community, I had calculations in Mathcad prime 10.0 version. When I am trying to open the sheet in prime 9.0, it gives me an error message that the file is not compatible as it is written in the latest version.  I would appreciate if anyone can help me. Thanks,Abdur

        Greetings, I tried to create custom functions in mathcad but I was able to do it, however I wanted to create that function fc and fc1 and I couldn't, I get an error message I understand how to compile and tried other functions but when I go to do it with results of vectors and matrices I have this problem here I attach the code in C only for the fc function, could you help me how to create both custom functions please?    

Would it be possible to be able to open a 3D model of a part/subassembly in creo view from a drawing/BOM table also in creo view? If not is there any other PTC software (other than parametric or any of the actual modelling softwares) that could do such a thing? (Currently using Creo View Express 11.0)