CAD

Is there a way for Creo to automatically generate a drawing tree? I'm not talking about the assembly drawing tree in Creo interface. In ASME Y.14.24 Types and Applications of Engineering Drawings, section 16, there's a Drawing Tree section. I'm talking about this. I attached the screenshot of it here. I have to make this drawing tree, and we have a lot of parts. It just doesn't make much sense to do it manually if Creo already has a feature for this. Thank you so much!

Final Part to the prerequisite studies for Laplace Transforms In Electric Circuits.   RLC Higher Order Circuits Continuing Notes And Solved Examples and Problems.   Section 1: Introduction To Operational Amplifier (Op Amp) circuits.   I. Several parts of chapters 2, and 3 from Coughlin and Driscoll Op Amp Textbook.Providing notes and solved examples to build the knowledge before enteringSchaums topics on Opamps. Often using the examples from Coughlin and Driscollto assist elsewhere in Schaums Op Amp topics.   II. Schaums: 1. Amplifier model2. Feedback in amplifier circuits3. Operational amplifiers4. Analysis of circuits containing ideal Op Amps5. Inverting Op Amp6. Summing circuit7. Non-inverting circuits8. Voltage follower9. Differential and difference amplifiers10. Circuits containing several Op Amps Followed by a sample Op Amp circuit called Servo Amplifier to build interest in Op Amps from Coughlin and Driscoll's textbook.   Section 2: Operational Amplifier

so I'm familiar with the help docs and other items in the help/support site on setting up a pen table (table.pnt)  but is there a specific "color" callout for cable part files?  or is it all wrapped up under pen 1? I dont want to set PEN 1 to black because ive got other entities on the drawing i want to have in color. Ive tried isolating the quilt_color to a unique pen and that doesn't work.  Any thoughts?  Or should I file an enhancement?  

Croe7.0.0.0ParametricDevelop Environment：javaHow to display CommonName on CREO feature tree.Which API should I use.thanks.

As per the original post.    Newbie here. How  can I increase the font size in the "Message Log Bar". Also, need to increase font size in dimensioning dialog in modelling.  I think I lost my config settings when i tried to fix myself. See screenshots. 

How to remove offset between drawing and annotation as seen in image 

I need to move an assembly to a new file location (new tooling project). When I save a copy and rename the assembly, none of the parts or drawings move over. I don't want to rename the parts, because the current part #'s are established.Is there a way to move over a full assembly with parts and drawings without renaming parts and moving each part and drawing individually?Currently using Creo 4.0 I don't have access to Windchill, but the company does have a Windchill licenses if needed.

Any can help me regarding this case 

  

I am using Creo Parametric Release 4.0 and DatecodeM140H team, i want to relocate the dimension attachement point. i used this ProSelectionDimWitnessLineGet but its not working. kindly help me to over come this issue. thank you

I want to get several options as shown in picture. could someone help me with this.Attached the Mathcad sheet. 

I am using Creo Parametric Release 11.0 and Datecode11.0.0.0custom map keys not working after new creo install. creo_parametric_customization.ui file did not change.start up load directory the same.

Hello,I'm using Creo Parametric 10.0 and I have a quesiton.Is it possible to have table on the drawing with lengths of each profile?Example how I want this table to look like:2 PCS | Profile 50x30x2 | 250 mm3 PCS | Profile 30x30x2 | 150 mm1 PCS  | Profile 30x30x2 | 120 mmI've created generic profile model with instances and I'm changing lenght of it by "making it flexible".I want to have this "flexible" length in table.Is it possible? Thank you all for your help.

I get a 403 Forbidden error when trying to retrieve a license file over the internet.

This error occurs when we try to access the LV Wiring assembly model in our top level model.  Any suggestions on a solution?Regards

Hello everyone, I cannot for the life of me find a way to use custom symbols I created. I created a symbol using "define symbol", but when I go to use it in "symbol", it is not there. At my last company, I was able to select "custom symbol", but it's not giving me that option here. Thank you in advance.  

Hi!  I'm Johannes, and I'm currently writing my master's thesis on a Creo Parametric project that I developed during an internship at a company with a commercial license in Creo. Now that I have finished the internship and am no longer employed by the company, I still need access to my Creo files for screenshots and dimensions from the assembly. I downloaded the student version of Creo 9 but cannot open the files I created with the commercial licence. Is there any way or workaround to open the commercial files with the student version? Or is there an affordable licence for about 1 or 2 weeks to upgrade my student licence, allowing me to open the CAD files created with the commercial licence? I hope someone can help me! Kind regards Johannes 

Hi,I am trying to solve a cubic equation, but I am unsure where I am going wrong. Please guide me. I manually calculated the values as follows:x1= 1231.629mm, x2=121.978mm, x3=-153.60mmThe Mathcad file is attached : Mathcad Prime09I tried two different method but not sure where I'm doing mistake 

We can manually control whether a parameter is designated in the parameter interface.   I want to know if we can control whether a parameter is designated or not through another parameter.   Like, When Control_parameter==YES, Parameter A is designated. When Control_parameter==NO, Parameter A is not designated.    

The "branch" command does not allow me to select the line to connect the tubes, what could be happening?   (view in My Videos)

How to construct ProIDTable for the assembly component I got throgh ProSolidFeatVisit api. Need assembly component path for the collected part file. ProIDTable id_table = {Array[0].id} works for the part file collected from the top level. If the required part file present inside a subassembly, this logic fails. Tried getting asm comppath typecasting ProFeature* Array to Proselection as below, didn't work. ProSelectionAsmcomppathGet((ProSelection)&Array[0], &compPath). Any ideas please?

I’m having an issue with trying to get a User defined parameter PIPE_DESCRIPTION from the linestock to the piping start part parameter DESCRIPTION.This is so when creating a pipe solid, each pipe part will have the PIPE_DESCRIPTION parameter value added to the DESCRIPTION parameter.Then I can bring this into my table BOM, along with all the other fittings and parts which have the same parameter.Is this possible or is there another way?I'm using Creo Parametric 10.0.4.0

Where is the ProRasterFileWrite API.Why can't I find it？I want to take screenshot for graphics area in Creo Parametric through toolkit.

In Creo 6.0, I am trying to create a simulation file that uses the family table to bring in the desired instance. The simulation setups (constraints, forces) fail when switching instances. I believe this is because when selecting surface regions, simulate cannot reference the feature as the part files usually do in the family table. Simulate loses the surface region reference because it is trying to access the specific feature from the specific instance where the simulation setup is created. Is there a way around this, or is this possible in newer versions of creo?

Hi, I have to import a CAD file from ALTIUM software.The CAD file is an electronic board exported by the software ALTIUM in a 25 MB .step (or 20 MB .x_t).ALTIUM can export the files format in the picture below.When I import this two types of files, they opens in a long time.How can I reduce the time of uploading of that types of CAD models?  Best regards, Michele Barile