CAD

I'm not able to assign the output of the solver to a variable.  I can do it with other examples, but it doesn't work with this expression.  What am I doing wrong?  

Hi. I tried to put in Mathcad Prime the equations for the attached pdf file,  but I got some error with the last line, where the  FIND function is included. Where is my mistake? 

Hi,Why is not possible to plot like below?  

Im trying to round the inner bottom edges of this tank. It has this small pipe leading out. When I apply round to it. It opens on either side of my pipe. How do I not have this? It doesnt show the holes in the preview but when I click accept it does. Im on creo 10.

I’m encountering a challenge where I need to filter out all assemblies with the exception of certain ones.Typically, I use the command "&asm.mbr.type != ASSEMBLY" to filter out assemblies, but now I need to modify this to exclude specific assemblies such as F902355, a5879, etc.Using Creo 8.

hello,i have a question: i have one big assembly assembled two times in another assembly. if i choose a MasterRep for one of the file in the first assembly there is no problem but if i add the second one in a group and do the same thing then the occupied memory goes up as if it were loading the whole assembly.have you had the same behaviour?thanks

By Chris RussellThis worksheet will:Calculate the bearing capacity factors and the maximum load of a pier  Apply to Mechanical Engineering  Perform using shear strength, vertical stress, density, bearing capacity, Merrit Handbook, maximum load, etc. This worksheet using PTC Mathcad shows you how to calculate the bearing capacity factor for a specific pier, and then uses this calculation to find the maximum load of the pier. To begin, the worksheet defines all of the properties for the footings of the pier, the un-drained shear strength, the effective vertical stress, and the density of the soil the pier is on, with reference to the Merrit Handbook.  Next, the constants to solve for the bearing capacity factors are defined and then the calculation itself is solved. Once the solution is found, it is used to calculate the maximum load of the pier. All calculations, formulas, data, and solutions are provided for you in this worksheet to aid you in your own calculations.Downl

I am using Creo Parametric Release 6.0 and Datecode6.0.4.0How to Export Creo part to Step files silently using command prompt window

Hi everyone, can anyone help me with SmartAssembly.I want to create a direction pattern of a component. Here's the code I wrote but it doesn't workand here is the error: thank you in advance  

Hello! Is it strongly adviced to NOT make a drawing in Creo 9 of an assembly made in Catia v5?  I'm making an component for a client. The component consists of two sheet metal plates that are cut and welded together and then applied a gasket. An assembly in Catia contains solids and surfaces that represent the plates and welding paths.  I modeled the components in Catia v5 r28 and the customer uses Creo 9.  Then I made a preliminary test of the question above by1. Export a stepfile of the assembly,2. Open step with creo and save the assembly and parts as creo asm and parts. 3. Open creo assembly and designate a top view and front view in the assembly. Create simplified representations of the assembly (cutting process of each plate, welding process, gasketing process) 4. Create a drawing and made a sheet for welding and a sheet for cutting of one plate with their respective simp representations. 5. Dimension the views. I put an outer dim

Hi,What does rows and cols? See below the example at which I am referring: And beside the fact that:

Dear all, I am running into the strangest problem: for some reason in Creo 8.0.5.0, when I double-click a dimension in the Sketcher, I cannot edit it any more. The text input appears but disappears instantly again. Only when I am very, very fast in entering a new number, I can edit the dimension. There is no apparent reason why this happens, it started all of a sudden. Running in win32_gdi-mode, and re-installing Creo did not help. Has this been seen before?

When I open mathcad prime on my computer with Windows 11. The app shows up on the bottom dock but it does not open a new window. What can I do to fix this? I need to access it ASAP for a big project. It was working fine yesterday. Nothing changed except I am now physically out of the country. It doesn't even give me an "invalid lisence". Just a black screen.I have tried:1. force-quitting the app (with a right click on the bottom dock).2. Force-quitting from task manager. (It always appears to stop at 170, 175 MB of usage. Nothing else is running on the computer)3. Rebooting my computernone of them work so far. I'm out of options.Thank you,Kevin

Hi,  I have a table of data as given below. I want a function or equation of the data. So that I can find the y value for desired x value.Please guide me how to do that in Mathcad. I'm using Mathcad Prime 9.0 xy6.22159.115313111159718822267246227553050334636423939433547335130

Hi,Why when I added a constant value a to a derivative I see that the laplace transform of a derivative did not work as expected? Am I doing wrong something? Or?Prime 9 sheet attached..

When I ran the conversion tool it converted mathcad15 statementto Prime 9 Statement which only works if a precede it with an additional variable definition where NPS1 is already defined.Any ideas why this additional variable statement is required for Prime9 but not Mathcad15?  

Hi, How to make this expm function to work also for scalars:    

Hello, Sorry to post on a subject that others have before, but I am getting wrapped around an axle and could not understand the prior posts.  How do I turn my alpha variable into a scalar or matrix?  I've tried to highlight the number and units then select 'matrix', but that did not work. I would greatly appreciate some direction.  My Prime 8 file is attached and a screenshot is below:  V/r,Devin

Would like bounding box size option within the analysis feature. Must have ability to create parameters for each of the 3 distances example: (height, width & length). Would be nice if it could tell the difference between if the geometry was rectangular or round. If round provide parameters diameter & length.   The evaluation needs to be able to evaluate simplified rep of part and/or assembly.   Use case: The parameters within the analysis could be used to establish bill of material parameters (part size for raw material purchases). Assembly level can be used to establish packaging size requirements.

Hello everyone,   I am using schematics 7.0 as a ECAD and I have already an existing design where I would like to update datatables (picture 1) which are already in the central catalog. Also in the design I use a variable connector which is also in central catalog. At this connector I assigned default dataset (the one I would like to update)   The question is how to proceed now? I would like to keep the variable connector, only update the dataset. I tried to move with the files in central catalog folder but nothing is working. I can of course create a new dataset and delete the previous one from central catalogue, but then I will lost the connection with the variable connector (picture 2).    I saw on PTC help website that there should be administrator and editor, but I did not get how could I become one. 

I have had Mathcad in versions 5, 8 and most recently 9 installed on my pc.I then removed versions 5 and 8 to gain storage on my pcNow I need to reinstall version 8 to be able to work on the same sheets as my teammates. However, when I go to install, it says that version 8 is not allowed. Any suggestions on what to do? 

Can anyone provide solution for above problem?

Does anyone have a method for calculating the speed of sound in wet steam?The standard method works for dry or superheated steam, but breaks down rapidly at and below saturation temperature.The 2015 paper by Šafařík, November, Jícha and Hackman "On the speed of sound in steam" shows a discontinuity in the speed vs dryness curves at about 0.98 dryness, but I do not know if that is supported by measurement.

Hello everyone, I hope somebody can assist me with this. I am working on a calculation for a planet gear with 4 sun wheels and 1 planet wheel. The aim is to determine the forces on the sun wheel. Initially, I have 3 equations and 4 unknowns. By making an assumption based on symmetry, I now have 4 equations. Unfortunately, I am not getting the correct results. Does anyone know where I can find more information on this or perhaps have a tip? Is my assumption correct regarding the average forces over the teeth? Thank you in advance.

Hi, I am generating a drawing of a large assembly. I have used Article - CS20577 to boost drawing performance and it works very well. I encountered an issue with creating detail views of section views. Upon creating the detail view, the drawing slows down severely to the point it is unusable. Mouse inputs take over ten seconds to be registered. Zooming in and out takes about a minute or more to execute. I cannot use the ribbon or any other commands during this time. If I erase the detail view (not the same as deleting the view, for those who don't know about the erase function) the drawing will return to normal and smooth performance. I find it weird that a detail view could be so heavy on the system that it causes such a slow down. Any ideas as to what is happening and how I can resolve the issue? The ideal solution would achieve normal drawing performance with the detail views showing (not erased). Thanks in advance.