CAD

Creo 10.0 ....while installing software i am stuck in step 2 ....even after I entered correct sales order number it is showing invalid file format .....how to solve this problem?

Dear Simulate Users,   I have the real material model of a plastic (PA66 GF15). A table - send by manufacturer - includes the Young modulus, the max.tensile strain, the max. tensile stress and finally the measured material curve: The dashed line (see elastic line) was created by Young modulus. It can be seen that the linear range of real curve is very short. The real curve begins to bend quite early. Theoretically the yield point is in the point of bending start.   1. But how can I define a material curve which approximates this real curve well?  2. Where is the yield pont exactly if the data table doesn't include it?   Thanks a lot; Roland

Creo Parametric 7.0.11.0 and Creo Simulate 7.0.11.0 both are installed, I want to uninstall Simulate 7.0.11.0 only silently. I am using the below comment:Start-Process -FilePath "C:\Program Files\PTC\Creo 7.0.11.0\Simulate\bin\uninstall" -ArgumentList "-quite -xmlPath `"C:\Program Files\PTC\Creo 7.0.11.0\Simulate\bin\pim\xml`"" But I am always getting the below option, but i want to directly uninstall creo simulate only with out user input  

Hello everyone,Is it possible to add multiple arrows to a text note in Creo Illustrate? Matteo.

Hello, i was confused when i looked at the drawing errors and the same drawing in my colleagues window. the errors were completely different.Could someone explain this? snap attached. Thanks,sandy

My company uses Creo to design large scale glass facades and other highly customized designs for the architectural market. Some of our parts are very special and some are typical steel cross sections.   My company is about to purchase an  OCEAN AVENGER PLUS DRILL LINE.  The AvengerPlus requires a DSTV compliant file which has a .nc or .nc1 file format files.   Does anybody have experience  with converting Creo parts into a DSTV compliant file?   Any help would be great.   Thanks. Steve

Hi, i am Creo elements/Direct Modeling Express- beginner.I want to move the 2D drawing on the 1st workplane to other workplane, so that I do not have to redraw it.Please somebody teach me how!

I have wing geometry that I would like to have as one body. There are lines traveling the span of the wing subdividing it and I would like to get rid of them if that is possible so that it is not subdivided at all. They have given me some trouble when exporting the geometry for meshing, though I'm not sure why. I would appreciate any help. I have included a picture of what I am talking about. I have shrinkwrapped the file but it still has these lines. This is Creo (8) Student Edition. 

 Is there any way to simplify this? 

I announce a competition - who will create the most interesting and beautiful portrait of the roots of two equations. I will send a hard copy of my book (2⁵ Problems for STEM Education - 1st Edition - Valery Ochkov - Rout (routledge.com)) to the winner of the contest. The end date of the competition is April 1, 2022. I will personally determine the winner. Materials explaining the essence of the task, in attachment. In the picture - a sample of a work of science and art, which should be submitted to the competition.

Dear all, I have searched the PTC and this user community portal for help in creating parametric internal and external spline parts. There are many posts on these but none of them have a solution. Has anyone solved or found an easy method to generate internal and external helical splines? Thanks and regards,Jay

Even though the function is defined when doing ans := ShahST(G), MATHCAD says its undefined. Please advise. Thank you in advance.  

Hi everyone,I have a mechanism analysis set up involving three hydraulic cylinders linked to a common part. During the analysis, I get an expected failure, "The mechanism constrains could not be satisfied. The mechanism could not be assembled." I get this error because I defined the ranges of operation for the hydraulic cylinders, and one of them is going out of range.Currently, I have translation servo motors driving the motion of the cylinder rods. The motion is defined such that every combination of cylinder extension/retraction is tested (i.e. cylinder 1 is fully extended while the others are retracted, then cylinder 2 is extended alone, then 3, then cylinder 1 and 2 but not 3, etc...). These numbers are loaded from a table in the motor definition, and the only way that I know how to fix the constraint issue is to analyze the failure point and redefine the motor magnitudes at the time of fail.Is there a way to run the analysis such that the program will run without causing constrai

Every CSYS is mathematically defined in space by 6 parameters.Is it possible to retrieve these 6 parameters (XYZ-translation + XYZ rotation) in Creo?The XYZ translation is easy: it's just a measurement feature.But the rotational parameters are not that simple.Does anybody knows how to do this?Some background:I have a CSYS, somewhere in a complex assembly. It is defined by a long chain of features and dependencies, interconnected with parameters and relations.At the end of the road, I would like to know the exact position of this CSYS, with reference to the base CSYS.With these 6 parameters, I should be able to create a new CSYS, referenced to the base CSYS, and equal to the original CSYS.Any help would be greatly appreciated.Jeroen.

Hi I have 2 equations that are written symbolically. and there are 2 variables : "D" & "z"  I cannot solve the equations even in solveblock . please help me . my file is attachedThankyou

Hi! I'm a college student having problems with the creation of the matrix. The informational failure is "Found a similarity while evaluating this expression. You may be dividing by 0 or inverting a similar matrix." Please help! 

Hello! I just created a new account with my university email account, then when I set up mathcad Prime it gives me error of: "You have reached the maximum number of license requests available for your product type." Please help me with this issue. Thank you

I am using Mathcad Prime Release 9.0 and Datecode9.0.0.0Retype serverlicense adressHere are the errors that I facedHi,We have users that needs to retype the serverlicense-adress once or every other week, it is like the program don't remember what you typed in.All other functions i working so it is only this that we have some issue with, have been so since summer.I have the program also installed but don't seams to be an issue for me, but i don't use the program i that way, i just maintained the server and our license.Have you heard about this before, do you have some recommendation what we could do?Best RegardsTomas EklöfService Responsible

I have created a mapkey that users use for updating legacy Creo parts (Creo 6 and earlier).  We are now on Creo 9.The mapkey checks for missing relations and parameters (including restricted) then adds them if they are missing.  The issue is that it will duplicate relations that already exist.  I put a pause in the mapkey telling them to delete old relations before continuing but we know that doesn't usually work. I also have Modecheck running looking for the missing relations and errors if they are missing.  It tries to add them even if they exist due to the fact that they are in the Post Regeneration relations. The relations that Modelcheck adds appear in the Initial relations. The reason for locating them in the Post Regeneration was that it was overwriting legacy relations located in the Initial relations.  It is causing a regeneration issue that Modelcheck flags.In my mapkey I have relation written to bypass a couple relation (these came from PTC

After interaction with Windchill check-in, a parent assembly demonstrates what I can best describe as a dynamic transparency.  Tracking with view orientation, assembly component portions that would be invisible within a mating part are visible (with display style set to any shaded version).  It's as if there's a dynamic clipping mode or transparency mode.  I have not been able to determine what settings are in effect or have changed.  Children of the parent do not demonstrate this issue.  Thanks for any assistance.

Hi,I recently posted a question about transferring Mathcad Prime 3 to a new hardware.@LucMeekes kindly guided me to the End-of-Sale Announcement and to a related FAQ where PTC clarified that licenses can be transferred for hardware replacement purposes after December 31, 2021. I was also recommended to contact PTC customer support for this.I contacted PTC customer support, but because I do not have a maintenance subscription, they reverted as follows:"The Community is the correct place for support. You already searched there, that ís great. I would suggest you create a thread under Mathcad and I am sure, one of our Engineers or Peers will guide you."Can any user or engineer from PTC help me with my Mathcad Prime 3? Please reply or message me if you think you can help!Thank you in advance.Felipe 

The existing rendering module in Creo Elements/Direct Modeling is from Lightwork.Lightwork was acquired by Siemens in 2018.Nothing has changed in the rendering module for several years and the possibilities are limited.My suggestion is to replace Lightwork with KeyShot, analogous to Creo Parametrics.

Hello, I'm a newbie to toolkit programming. I'm exporting a shrinkwrap model through toolkit. I want to add a new name to exported model. Could anyone specify how can I acheve that? My requirement is, when I click a button in Creo, user prompt should ask for a new model name. Once I enter it should assign to new model name. Is it possible?

We used to have an easy option to extract one body from another, but I am at a standstill in Creo 7..0.8.0. I need to solidify (or fill solid with shrinkwrap,) an existing import body. Shrinkwrap leaves the internal cavity. Then I need to extract this body from a fixture to be made to hold it. These are complex castings and not easy stuff like cubes and cylinders in youtube.

(I'm using Creo 8.0.3.0.  Thanks in advance for any help with this!)Hi, my situation is the following:I start with a simple single body part file. It starts out with a default PTC_SYSTEM_MTRL_PROPS material assigned. The density field is blank. When I access "Model Properties > Mass Properties > change", I see that "Assigned Material Density" is "missing" and I can't calculate the mass properties. So I adjust the Material Definition to have an arbitrary density value (1e-6 kg/mm^3). This enables me to calculate the mass properties, including mass and inertia. Next, I want to specify that the part body be 1 kg in mass. So I go to "Model Properties > Mass Properties > change > Define Properties by > Geometry and Parameters". This lets me type in a mass value of "1 kg", and when I click "calculate", it calculates the correct density, given the geometry of the part, to achieve the target mass. At this point I expect the new density of the geometry to a