CAD

For Example:- I have a skeleton model with a family table with 100 instances.- I then create a PART with a family table with 100 instances with the External Copy Geom (set to auto update) of the skeleton- When I very all instances of the new PART and open one of the instances the External Copy Geom is NOT regenerated for that specific skeleton instance and I have to manually edit definition for it to regenerate correctly. (This is NOT an ideal way of verifying 100's of instances) Is there any way I can fix this issue. Its a major issue for my design team. We are in Creo 10

I am trying to get ModelCheck to check my Part Parameters for any empty parameters.I would like it to report an error and make the user fill in the parameters that are empty (this cannot be a list, it just needs something/anything in it) I want the engineers to fill out the Material, condition ect parameters.Can Modelcheck check these are not empty? Using Creo 7.0.8.0

How to create a simple dialouge box for creo toolkit using of c++ porgramming with visual studio 2019. Please explain me with source code

Hello, I want to add multiple balloons in the drawing more than quantity available in assembly.For this how I can keep text blank of REF balloon? What and how shall I enter in to "reference_bom_balloon_text"?Any other suggestion than using symbol for balloon?Using REF balloon is OK but I don't want any text in "reference_bom_balloon_text". Thank you.

Good morning to all,I have a matrix that works well in Mathcad 15 but provides wrong values in Prime 9.0.I only converted the matrix from Mathcad 15 to Prime 9.0, which did not work well in Prime 9.0. Even though it does not mention any error in Prime 9.0, It simply does not provide the right matrix elements in Prime 9.0.The files below Matrix Right (the one in Mathcad 15) and Matrix Wrong (the one in Prime 9.0) are the two files I am talking about. Any help will be very much appreciated. regards,  Rogelio

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0Needing to update the schematics catalog and need someone to help walk me through the process

I am trying to write a code in Mathcad Prime 9.0 to make a K matrix by making the K0 matrix of zeroes populate with k matrix numbers as shown below and in the file attached. If anyone could please help me with the Mathcad code for that it would be much appreciated! (P.S. I do not have any experience with coding therefore I am not even sure where to start) Here is my mathcad:           This is what the K matrix should look like and it should be able to work for any n value

Dear Community Members, I've been working on a Mathcad function to exchange rows and columns of a square symmetric matrix, and I would appreciate your feedback on its correctness.I tried but it gives an error. The png file has the problem and the Mathcad has the solution that I tried. Thanks for the help. AR

I am looking post processor for deckel FP4A dialog 11... please help me if someone have ...

Hello all, I created a basic square with dimensions: H10.50" X L4.00" X T0.06" and create an STL for my 3D printer, when transferred over, these were the values. When i unchecked Inches, the mm is setup as inches value.the standard unit setup for the part is inches. When dimensioning it into mm with creo using standard unit inches for the part, it would build it correctly in the 3D printer with correct dimensions. I am unsure exactly what's causing this issue in my Creo. I don't think it's 3D printing related.Please can someone help me? Thank you,FYang

Just came across article CS378421 for whitelisting certain URLs in Creo's embedded browser.  This is close to what we need, but it would so much easier to implement for our purposes if there was the possibility to Block certain URLs, rather than trying to document all possible allowed sites. Could we for example have a ZBrowser Registry Key called BlockListLocation and manage that like the AllowListLocation?  This would be a major win for us as it would solve an age old company specific Windchill cache corruption issue I wont get into here.. 

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Hello, I'm working on a project with several people, and everyone designes mechanically welded assemblies with AFX. It creates a part for each profile, each beam which is saved locally (only on the CREO session). Yet, when another colleague wants to open this assembly, no profile is found or displayed. Lots of parts are missing in the model and it's impossible to work with serveral people on the same assemblies (not in the same time).Is it possible to resolve this probleme so that the profiles and beams would be loaded regardless of the open CREO session?Thank you in advanceHere are the errors that I facedMissing modelMissing reference

Hello everyone,I would like to understand in Creo parametric how the .prt files that contain a copy geometry feature that has another reference .prt are updated.Why doesn't the son update when I open it, even if automatic regeneration is set?I always have to do it manually with CTRL + G or regenerate (I attach an image of the two objects opened from a clean session - first father then son)The version used is Creo 8.0.7.0I also tried with 10.0.3.0 where I saw these two new entries (regen_data_sharing_ref_models e retrieve_data_sharing_ref_parts) but even adding them with a value of yes did not change the result. Matteo.

Dear PTC Community,I am currently working on Creo Simulate to perform a FEA on a rain cowl assembly for different wind loadings and also to check if the current weight of this rain cowl assembly can be taken by the motorised louvers without failing (rain cowl assembly is mounted onto the motorised louvers with the help of bolts).I have defined fasterners and weld connections wherever needed but facing some issues with them as listed below:Issue_1: The perimeter welds defined at locations where the top part of the rain cowl assembly is being connected to the side part for example is not being taken into consideration and the solver says that it is taken as bonded idk why? Issue_2: The end welds along the curve for the same two parts of the rain cowl assembly are ignored by the solver idk why either. (It is treated as bonded there) Issue_3: Single element at the top left part of the rain cowl assembly shows an error (Can be seen when tried to run the own_weight static design st

Repeat-Last-Command (RLC) utility recognise last command used in Creo and allow to you start to use last used Creo command. Apply it with CTRL+SPACEBAR   For example: if you create a Datum feature you can crate new Datum feature directly with CTRL+SPACEBAR or in the Sketch if you create new Rectangle and you need to create again the new one - select CTRL+SPACEBAR and you can create again last command (Rectangle).   DONATE: If you find my RLC (Repeat Last Command) utility useful, please support me - Money donation will be nice 🙂 - DONATION button you can easy find on my "download" page.   Download RLC utility: http://4kside.com/en/download.html Good luck,Vladimir Palffy

Hello,I made a part using Creo's Sheet metal with image below.When I create an STL file and send it to our 3D printer, it makes it under millimeter only. Typically, it always ask if i want to convert to inches. When i load it into the 3D printer, it comes out super tiny and small. the problem here isn't the 3D printer, but the part itself.Even though i change the properties to inches/lbm/seconds. it still causes the same issue I have a big feeling it has something to do with this axis below causing this issue:If i build it from a solid model, it doesn't have this issue. I need to build this part under sheet metal, because it will become a sheet metal.Please help.thank you PTC community

If I have a vector A and B both with 10 elements. How can i create a vector  C that has the minimum values of A or B on each corresponding position.Thanks in advance !

I am trying to combine a few load cases (speed and loading combinations) into arrays (or matrix), see simple example of input and what I'd like to achieve. I know how I could use nested FOR to loop through the arrays but I don't know how to assign variables to get the end result. Or is there a different way? I hardly know anything about functions and programming in Mathcad. 

Hi, I have a MCP sheet that pulls from some matrices to perform basic calculations that takes over an hour to complete. I would like to improve this significantly if possible. I tried to rely on built-in functions (e.g., "lookup") when possible for calculation efficiency. The main calculation (image below) uses data from three matrices (36177x9, 2412x9, 1206x12) to perform basic +-x/ calculations resulting in a 216619x8 matrix. At the end of the sheet, there is some red text that helps point this out. File attached. If anyone has tips for how to improve calculation speed or is able to help me optimize this process, I would much appreciate it! Thanks!AndrewMathcad Prime v9NO multithreading11th Gen Intel(R) Core(TM) i5-1145G7 @ 2.60GHz 2.61 GHz24.0 GB64-bit 

sPurge 3.0- The Tool to purge Pro/ENGINEER files available for new version PTC Creo 10. 

HiI am looking for a drawing format for academic use. mm, ISO, 3rd angle.I'm looking for format that templates of standard part and assembly template will be linked to parameters (DESIGND_BY and DESCRIPTION) Thanks

I've created a part model with lettering as a cosmetic sketch, and have been trying to export this part as a STEP file. However, whenever I open the step file, the lettering is completely missing. How can I ensure the cosmetic sketch lettering is visible on the exported STEP file?Creo Parametric v7.0.4.0

Dear Fellow Community Members, Please help me on this topic. I had created a BOM Table with Multiple Rept Region, But it is not Functioning Properly. Some regions are working fine but, some like Part Name, QTY are not working. Please suggest some work around or corrections.Thanks in advance

Hello, While opening one of my master assemblies, it is getting crashed in midway. could you please help. i tried new installation and updating the Graphics but none of them worked. the issue was not there earlier. br,Sandeep C.

Hello all, I'm just getting started with piping.  I found a tutorial through the help button in Creo, but I can't get back to it for some reason.  I managed to make the routing that I want, and I'm pretty comfortable with the interface, but I assume that I am doing something wrong.  All the pipe routes appear as lines, and not 3D pipe.  I created the Line Stock and checked the dimensions, but maybe I did something wrong. This is a series of 16" and 24" piping coming off a suction and discharge header. If you can tell from the screenshot, please let me know what I'm doing wrong. Thanks in advance.