CAD

Hi! I'm a college student having problems with the creation of the matrix. The informational failure is "Found a similarity while evaluating this expression. You may be dividing by 0 or inverting a similar matrix." Please help! 

Hello! I just created a new account with my university email account, then when I set up mathcad Prime it gives me error of: "You have reached the maximum number of license requests available for your product type." Please help me with this issue. Thank you

I am using Mathcad Prime Release 9.0 and Datecode9.0.0.0Retype serverlicense adressHere are the errors that I facedHi,We have users that needs to retype the serverlicense-adress once or every other week, it is like the program don't remember what you typed in.All other functions i working so it is only this that we have some issue with, have been so since summer.I have the program also installed but don't seams to be an issue for me, but i don't use the program i that way, i just maintained the server and our license.Have you heard about this before, do you have some recommendation what we could do?Best RegardsTomas EklöfService Responsible

I have created a mapkey that users use for updating legacy Creo parts (Creo 6 and earlier).  We are now on Creo 9.The mapkey checks for missing relations and parameters (including restricted) then adds them if they are missing.  The issue is that it will duplicate relations that already exist.  I put a pause in the mapkey telling them to delete old relations before continuing but we know that doesn't usually work. I also have Modecheck running looking for the missing relations and errors if they are missing.  It tries to add them even if they exist due to the fact that they are in the Post Regeneration relations. The relations that Modelcheck adds appear in the Initial relations. The reason for locating them in the Post Regeneration was that it was overwriting legacy relations located in the Initial relations.  It is causing a regeneration issue that Modelcheck flags.In my mapkey I have relation written to bypass a couple relation (these came from PTC

After interaction with Windchill check-in, a parent assembly demonstrates what I can best describe as a dynamic transparency.  Tracking with view orientation, assembly component portions that would be invisible within a mating part are visible (with display style set to any shaded version).  It's as if there's a dynamic clipping mode or transparency mode.  I have not been able to determine what settings are in effect or have changed.  Children of the parent do not demonstrate this issue.  Thanks for any assistance.

Hi,I recently posted a question about transferring Mathcad Prime 3 to a new hardware.@LucMeekes kindly guided me to the End-of-Sale Announcement and to a related FAQ where PTC clarified that licenses can be transferred for hardware replacement purposes after December 31, 2021. I was also recommended to contact PTC customer support for this.I contacted PTC customer support, but because I do not have a maintenance subscription, they reverted as follows:"The Community is the correct place for support. You already searched there, that ís great. I would suggest you create a thread under Mathcad and I am sure, one of our Engineers or Peers will guide you."Can any user or engineer from PTC help me with my Mathcad Prime 3? Please reply or message me if you think you can help!Thank you in advance.Felipe 

The existing rendering module in Creo Elements/Direct Modeling is from Lightwork.Lightwork was acquired by Siemens in 2018.Nothing has changed in the rendering module for several years and the possibilities are limited.My suggestion is to replace Lightwork with KeyShot, analogous to Creo Parametrics.

Hello, I'm a newbie to toolkit programming. I'm exporting a shrinkwrap model through toolkit. I want to add a new name to exported model. Could anyone specify how can I acheve that? My requirement is, when I click a button in Creo, user prompt should ask for a new model name. Once I enter it should assign to new model name. Is it possible?

We used to have an easy option to extract one body from another, but I am at a standstill in Creo 7..0.8.0. I need to solidify (or fill solid with shrinkwrap,) an existing import body. Shrinkwrap leaves the internal cavity. Then I need to extract this body from a fixture to be made to hold it. These are complex castings and not easy stuff like cubes and cylinders in youtube.

(I'm using Creo 8.0.3.0.  Thanks in advance for any help with this!)Hi, my situation is the following:I start with a simple single body part file. It starts out with a default PTC_SYSTEM_MTRL_PROPS material assigned. The density field is blank. When I access "Model Properties > Mass Properties > change", I see that "Assigned Material Density" is "missing" and I can't calculate the mass properties. So I adjust the Material Definition to have an arbitrary density value (1e-6 kg/mm^3). This enables me to calculate the mass properties, including mass and inertia. Next, I want to specify that the part body be 1 kg in mass. So I go to "Model Properties > Mass Properties > change > Define Properties by > Geometry and Parameters". This lets me type in a mass value of "1 kg", and when I click "calculate", it calculates the correct density, given the geometry of the part, to achieve the target mass. At this point I expect the new density of the geometry to a

Hi! I have a problem using the ProUITree function to perform keyboard input operations.Previously, I had successfully implemented the function of keyboard input text into cells using ProUIInputpanel and ProUITable controlscomponent.The documentation in the Toolkit Guide found the following related functions to implement:ProUITreeenableCellkeyboardinput (true)//Allow tree controls to respond to keyboard operationsProUITreeTreecellinputActionSet()//Set the response action for the controlProUITreeTreecellinputGet()//Get input textProUITreeNodeColumnntextSet()//Set text content But the result is that the operation function was not called after calling ProUITreeNodeColumnntextSet to set the text contentCan anyone with experience explain how to use these functions or provide sample code?thanks!

I am trying to post out a thread cycle through creo for a Haas lathe. On the cycle line itself it only posts out g76 g98 f20. I've looked through the post processor and changed a few things in the threading cycle area but nothing has changed.Any ideas? Thanks,

I just opened a ticket but this looks like a bug and I am wondering if any of you have encountered this and have a good work around. It looks like in Creo 9.0.7 its not respecting independent layer status. When I try and hide a curve in one view it effects the top drawing layer status even though it is not set as such.     We just made the jump and have found some other small issues but this is the biggest one for us.

Hi everyone, how can I replace a dimension on the view that I want, instead of the view proposed by creo? Best regards. Michele Barile I want to place the dimension proposed by this command, but not in this view, in another view.  

Hi all,   I'm running Creo 2.0 Student Edition. Under Collision Detection Settings>Optional Settings, I only have the option for "Sound Warning on Collision". I'm looking for the option to "Stop when colliding". Is this a limitation on the student edition?   Thanks in advance

Creo 7.0.10   Does anyone know how to search for sketcher dimensions or relations using the search tool? I am debugging a model with sketcher relations. I know there are two relations in the model that are sketcher relations from reviewing the message log of the part. Any search tool query that would identify the sketch or feature that is using the sketcher relations would make my life easier when dealing with these.     Do not use sketcher relations unless there is no other way to capture the design intent required. It makes debugging models convoluted. The only sketch relation that is unavoidable that I am aware of is when the trajpar parameter is used in a sweep and needs to be controlled with a relation. There may be others, if you know of one or more post it here for reference.

Hi Guys, I want to share the model to the vendor but vendor can view only they can’t measure manually and modify it. Is there any option for this? Regards, Aj

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0In sheet metal mode, are there any function to set limitation of Sheetmetal to protect overlap each other when unbend?Now user use Flat pattern preview to check after finish Sheetmetal design.However, user don't want to fix after check by use Flat pattern preview.They want some command to alert overlap when during design sheetmetal on that time.Please share some technique to help me.

I am using Expert Moldbase Extension Release 15.0 and Datecode15.0.3.0N_3030_N cannot be retrieved

Hello, I'm having some trouble understanding which programming tools for Creo Parametric are free and which require licensing. When I open the "ReadMe.txt" file in the otk_java_free folder in my Creo Parametric installation, the is a note about downloading the user guide: --otk_java_free User's Guide-------------------Please refer to the PTC Creo Object TOOLKIT Java User's Guide.The User's Guide is available in a PDF format. This file is located at:<creo_loadpoint>/Common Files/otk_java_doc/otk_javaug.pdf-- When I open that document, the title is "Creo Object TOOLKIT Java" user guide and it includes a big section about licensing and needing a Creo Object Toolkit license. When I try to load the sample "InstallTest" sample I get an error trying to load it. I do NOT have a OTK Toolkit license but I do have a Creo Parametric License. Can anyone explain is this sample SHOULD be able to run on my system and maybe point me to a resource to get it running? I have

Has anyone else noticed that sometimes ModelCheck will flag a word as misspelled even though it is in the user_words dictionary file? I even cut and pasted the word from the ModelCheck results flagging it as an error into the user_words file and the next run it gets flagged again as misspelled. The word is CONTAINMENT. We are running Creo 9.0.5.0.

Hi Guys,Can anybody to simplify this program?I must run for “k” and “i” twenty times the block.CarlosRomero

Start file (MCS) entries in my ModelCheck configuration folder:PRT_PARAMETER MY_PARAM NONE EQ PDMPRT_PARAMETER MY_PARAM STR EQ TEST1This is working OK in Interactive mode,MC creates the parameter as Designated:Error message when running MC in Save mode:Missing items PARAMETER: MY_PARAM Type: STR(see the attached screenshot with results from Interactive and Save Mode)Creo version 7.0.2.0

Hello experts I have a question about volume rough seq. Is it possible to add some minimum default radius on every motion change tool path endpoint to avoid sudden motion stop and start for a smooth machine run? please check the attachment for detail. regards AsifFisa