CAD

I am trying to add a new license file, but it just keeps saying that it expired.If I go online to look at my licenses, it says there are none.Is there a time limit from when a license is purchased to when it is activated?  The license file I have (.txt) says it expires in 2025.

Any idea why the revolve Axis pattern keeps failing?  I have patterned the sketch with the extrude but no difference.  The sketch patterns fine, but the extrude will only do 1 additional pattern.  This is for a spur gear where I input parameters like #teeth and the model should update.  Only the pattern about axis is causing issues.  Something with my references?  I have an older spur gear file from Wildfire 2.0 that works for one feature (half the gear tooth) over 40 teeth and then the other feature (other half of gear tooth) only works up until about 30 teeth then it fails to create the additional patterns beyond that.  File attached is of my new spur-gear where only one additional extrude pattern is being created, others are failing to generate.  Reference issue?  

Hello community, I've got a question related to a start template for 3D Parts in Creo. Is there a possibility to adjust the size of the reference datums? I know the parameter "datum_display_default" which is already set to "preconfiguredsize", "datum_outline_default_height" and "datum_outline_default_width" are also set.  The problem is that the first reference datums are not affected by this paramter. Is there another way to adjust these datums? Many thanks and best regardsChristian

need to retrieve license key for Mathcad 14 over the internet but cannot

Hello,is there a possibility to access version 15 files after end of January, i. e. with a viewer programm or evaluation license? RegardsHolger

Buenas noches, Por favor en la programación que estoy realizando si alguien me pueda ayudar se tata de aplicar condiciones a una matriz. Gracias de antemano por la valiosa ayuda. Mathcad Prime 8.0. 

Hello, I have a documents that has elements on the right of the document "page" (viewable in the "draft" view).I tried multible ways to generate a PDF ("save as"; MS print2PDF "all"; select all elements and then in print dialog "selection") where I can see all content but I only see what's viewable in the "page" view.Increasing the page is not an option as I'm already at "A3" size. See attachments. RegardsHolgerDoes anybody

Hi, I need to collapse a feature in the model tree but the feature is greyed out when the part has a family table. I need to collapse a "Copy" feature to remove its reference to make it independent of any reference. I'm using Creo 8 

AllI've taken some of the introductions to CREO Simulation applications including Ansys and their own internal application. I've been trying to apply this in my designs, and have had good success in optimizing parts designed individually.I'm working on incorporating analysis into assemblies to get a better idea of how forces from one part transfer to an adjoining component.    For the above simulation, the assembly constraint for the lever arm was a "Pin" with rotational limits that went past the point of contact.Additionally, 3D Contacts were added for the lever-CAM-radius and the flat surface they would be contacting.Note however all the force from the lever is being transmitted into the block at the first junction (Red Circles), and not at the lever-CAM contact points (Orange Circles.) Is this a problem with:- Assembly constraints?- Mechanism setup?- My expectations for Live Simulation? Appreciate any insight!Dave

Good morning, We use the CREO application, not Math cad! I therefore cannot choose the “Creo Expert Moldbase” “Creo Tool Design” “Creo Design Essentials” solution for support in using Creo software. SR   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- Bonjour,Nous utilisons l'application CREO non pas Math cad!je ne peux donc pas choisir la solution "Creo Expert Moldbase" "Creo Tool Design" "Creo Design Essentials" pour avoir du support sur l'utilisation Logiciel Creo.SR

I am using Creo Simulate Release 4.0 and DatecodeM070The Large deflection option is unavailable to select for a single pass contact analysis#, do I need a different licences to select this option?Here are the errors that I faced*** Warning: Large deformation and/or strain detected during contact analysis.   More accurate results may be obtained if 'Calculate Large Deformations' is selected.

I would like to know if the analysis of this network is correct, thanks:

Hi all, I have been trying hard for the last few days to calculate thrust on a propeller, but failed miserably in every attempt. Since there are no detailed videos showing this (or i couldn't find them), can anyone show or tell me here how to do it.I have tried using rotating wall and non-inertial frame. 

Kindly see the attached code. I would like to generate 10 samples of size 5. Then calculate the mean of each sample, so that I have 10 means.  However, my data contains only five elements. Obviously, something is wrong. Kindly assist.

Can I easily switch between the Lite and the Full versions? The end users want to be able to use both for a while

MY CD for Mathcad 14.0 M020 is corrupt.Would you please email me a new copy of CD English

ERROR - Entities do not form loops; cannot modify draft hatching Cannot select draft entity, I'm in sketch tab even cannot select draft entity with Alt key.

I recently upgraded from Prime 8 to Prime 9, hoping for a resolution to the performance issues we've run into. I've noticed that files greater than around 3.5 MB experience a significant decrease in performance. Legacy Mathcad (15) didn't have these performance issues. I'm wondering if and when PTC is going to resolve this. I've seen a few workarounds, like vectorizing of for loops, etc, but we shouldn't have to resort to workarounds when the original Mathcad worked fine.

Dear Support.We would like to purchase Mathcad 9 prime Subscription for my Coaching class. We are located in Kuwait. We would like to buy yearly subscription using my credit cardCan you please guide us and provide me trusted website so I can process payment.

Hi everyone,I am doing a drawing for a 6 cylinder crankshaft and I need to show Cross sections for all lubrication holes along the crankshaft axis. The holes are always normal to crankshaft axis, but at different locations along the crankshaft axis. Is there any way to select a plane which would serve as a reference plane to create multiple cross sections paralel to that plane but with offset dimension. Also, would it be possible to place the created cross sections directly below the parent view and show the cut position with a line (instead of arrows in parent view)?Thanks ahead!

Check out this video on MultiAxis Milling w Creo NC from PTC Application EngineersPresenters: Lee Goodwin (Solution Consultant, Principal) and Ryan Butcher (Solution Consultant, Fellow)Original Date Presented: October 19, 2023 To dive deeper into the subject, check out MultiAxis Milling. 

Hello, Again.Im trying to optimize a couple systems,one liniar and two others non-liniar.Right now i have a liniar programming problem with 7 decision variables and variables and 3 restraints, how ever i have no idea how to implement a simplex algorithm. Tried using the solve block but i failed 

I  NEED TO FLATTEN THE FLIGHT SCREW , IS THERE ANYWAY TO FLATTEN THE FLIGHT?   Updating Media  

I'm in Creo 7 & Adobe Acrobat X.  I do a Save As/Save a Copy/PDF and the PDF I get has really short dashed lines that are supposed to represent hidden lines, there not scaled to the size of the part.  This wasn't a problem in Creo 6?  Is there a solution?    

Hi all,I am trying to make a new symbol. I would like for this symbol to just be a note with pop up boxes for the information needed. A pop up box like this: Is there anyway to get this into a symbol note? I don't want it to be a parameter. Just simply a box to type in what is needed. Thank you