CAD

When I have a filename in my document footer that is longer than the width of the page, the filename runs off the side of the page. To fix this, I have to make the text smaller so that the grab bar on the right side of the text window is visible, drag it to within the margins of the page, then reset the text to original size. The problem is that this setting doesn't get saved when the document is closed. Every time I open the file it's back to running off the page. Is there anything I can do about this, or is there any way I can report this to PTC as a bug? The attached image shows how it's supposed to look at the top and how it looks every time I open the file at the bottom. I'm also attaching my .mcdx file in case that's helpful at all.Mathcad Prime 8.0.0.0

I have a large matrix representing an image, 4000 columns, 2000 rows. I would like to change the values of some of the matrix elements and these elements are defined in a pair of vectors. Trying to automate the process because of the extreme size and complexity. I have attached a small example of what I am doing (and doing wrong) in which I have set up a FOR loop. This loop changes all of the elements, not just the ones I want. Help? See attached example.  

I'm having an issue with my drawings in Creo 9.In the UI I'm able to get the drawing to look the way I want it to, with no hidden lines;However, when I print, one element of my assembly (and only this one) prints out with hidden lines shown:When I return to the Creo window after doing a quick export to .pdf format for printing, the troublesome element has bolded purple lines, which I assume is a clue to what's going on here, but I don't know what that means.Any idea what I've done here and how to correct it?Thanks!  

Hi, I have Creo 3.0 and Creo 6.0 Essentials licenses but lost the installation media. Please anyone post an active link where I can download the Creo 3.0 and Creo 6.0 Thank you, Nava      

If you want to change the color of your feed path, you have to change the following system colors: -----------------------------------------------------------Translated the title from German to English language using Google translate by vnamboodheri.Translated on 30-01-2023 at 16:48 IST.Old Subject - Feed Color; Vorschub Farben, Creo NC, Solution Lösung Antwort

I have legacy XMCD files (mathcad 15) which I'm unable to convert.  I'm also unable to install Mathcad 15 as not even trial versions are available anymore. Is there any way to convert my files or gain access to mathcad 15 still?

Hey there y'all,  I'm having difficulties updating a MathCAD 15 file to Prime 8 in that we're losing functionality of the file. I didn't write the original file, and I've got two weeks experience with MathCAD anything. Lots of Googling and time in the PTC support section.  I can get some plotting done in the Prime file by taking "xx" to "x" (you'll see it near the top in the Live Load Moment and Shear Influence Factors section) but anything beyond the first two plots is broken. Fun!  Attached are the original file as given to me, the file the converter in Prime spat out, and the XML log.    

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0I am trying to create a arc for a library component. When I select on the arc tool I get the following error at the message window "Operation only valid in Edit Mode". I have gone to the basic tutorial document and it states "In the graphics window, double-click on the bottom left corner of the rectangle. The line enters edit mode.". I have done this but I still cannot use the arc tool. I am wondering if I could get direction on were specifically I double click or how to enter edit mode.Here are the errors that I facedOperation only valid in edit mode

When create a User Defined Parameter in the Material Editor and assign this Material to the Part - how can I Display this Material Parameter in Parts Annotations. I want to show it in a Note or in a Table   

I am using Creo Parametric Release 4.0 and DatecodeM130We are having a problem accessing “ISDO_II_SET” (Creo Interactive Surface Design Extension) that we used to have and the “ME Simulation Basic and Elite” extensions. With the upgrades in how PTC packages applications, the license application “ISDO_II_SET” is now called “Interactive Surface Design Extension II (ISDX II). This application allows one to complete both technical and freeform surfacing. I noticed that this tool is only available in the Tier 3 package of Creo Design Advanced Plus. Also, accessing the ME simulation tools is a problem also. If these are supposed to be floating extensions, they do not show up when going through the “reconfigure” process to try and access them.

Hello everyone, I work with Creo Parametric 8, and I am facing some issues with .pvz files. When I open these files in Creo View Express 9, assemblies are ok, but when I import them in Parametric, some of the parts of the assemblies are not the right ones, replaced but others or just incoherent. I don't understand why. I tried a lot of ways to open these files, as created an .asm file and then add the .pvz, and I tried to change the options when importing. To give a example (as I can't show images for confidentiality reasons), on Creo View a sub-assembly composed of a belt and a tank shows when imported into Parametric a part of the belt replaced by the tank. This is why my supposition was that some parts are replaced but other parts. I searched for conflicts in the names but didn't find links. An other question I had was if there was conflicts with temporary files or assemblies I imported earlier. I hope I was clear enough to expose my problem. I would appreciate i

I am using Creo Parametric Release 7.0 and Datecode7.0.2.0Hello,I have an assembly which is configured by a set of parameters (dimensions and loads) to obtain a set of configurations. For all of these configurations I want to run one (or multiple) simulation analyses. Would it be possible to automate this?As I read online, it is possible to run a batch of studies, however I did not yet find a way to do so with changing the input parameters of the model.Any help would be greatly appreciated.

Hello, I have a worksheet created with Mathcad 15 and was recently converted to Prime 8.0. After the conversion, I got this error message saying "units are not compatible" in an ODE solver as shown below:The initial and final conditions were defined asThis problem did not occur in Mathcad 15 and before, and I have been struggling for days to solve this.Does anyone have any suggestion? Thank you!  

I'm looking for a good source for hand tool models.   I'd like like to build a library to use for tool accessibility review and possibly to support PTC Manikin analysis.    This will be used commercially, so I have to be careful about licensing.  (GrabCAD is personal use by default)    These would be used in Creo Parametric and Creo View.  Thanks for the suggestions and leads.   Nick B  

getting started on creo schematics after having used pro/diagram,. I"m finding there are not any connector symbols or an easy way to create them. this is unreal for such an expensive product. can anyone direct me to how to easily create multi port connector symbols. it's sad that something this basic is missing. thanks much,  

I am using Creo Parametric Release 4.0 and DatecodeM110I have grouped features in a part. When the group is selected in the Model Tree, there is no "Ungroup" option from the right click menu.

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0Running the VB API Examples .net project I am able to connect to an existing Creo parametric session. From there I can't get any of the provided example functions to work. One thing to note when the software was installed it mentioned java was not found. Is that required to get the VB API to work? I have gone through the VB API and set the environment paths, but it is unclear what folder the PRO_DIRECTORY should be set to.What is needed to get the VB API Examples to function?Here are the errors that I facedptcExceptions::xToolKitNotFound

Hello, I use Creo 8.0.2.0   I have some symbols to update on drawings.. On some drawings the symbol name is "symbol.sym". In that case I can select a symbol directory (Annotations\Define symbols\Symbol Dir) and update the symbol. On some drawings the symbol name include the path. In that case Creo search in the path included in the name and doesn't consider the directory defined from Symbol Dir. (even if the path no more exist).   Is it possible to remove or break the link to the old path associated to the symbol name ?   Thanks  

I am using Creo Parametric Release 7.0 and Datecode7.0.7.0The Embedded browser does not follow the settings of the registry.The settings done are working well in Chrome (outside of Creo), but not inside creo.Modifications are done in "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Google\Chrome\AutoOpenAllowedForURLs" in order to open files without asking where to store them.

Creo simulate tab for the live version in Creo 7 is grayed out and doesn't allow the user to use it.  

Hi Folks, Where I can find Creo Object toolkit configuration and Demo video in PTC support portals? please help me out. I have installed Visual studio as per GSG guide found from common files\otkcpp folder but its not working as expected. Thanks,Santhosh       

 Hi all, is there a way of editing the dimension line for an ordinate dimension?I don't want the full length arrow like in the attachment - just a short arrow pointing to the extension line. thanks

The following tables are created in Creo and exported to csv. It is similar to what we want to implement.Therefore, the following points should be considered.1. Can I create and export the table as shown?2. Can I export extensions to xls?3. Can I insert a table into a specific area of an existing Excel file (xls or csv)? I would like to know if it is possible with a map key or a toolkit. please teach me how to get that   thanks regards

Hello,I would like to know if you could help me please with some idea how could I solve the following 3rd degree equation:- equation is of type ax^3+bx^2+cx+d=0- each of the coefficients has a max and min value:a ->(amin, amax)b -> (bmin, bmax)c-> (cmin, cmax)d-> (dmin, dmax)It results a high number of 3rd equations to be solved from all the possible combinations of the min and max values of the coefficients.Solving each combination in part takes lot of time, so I would like to know if there is any possible way to get the solutions from all the equations obtained from all the possible combinations of coefficients?Thank you,Marius       

Mathcad Prime 8.0.0.0.0.0.0 So I am trying to store mixed data in a matrix.  It is the only way to pass optional parameters to a user defined function.  One of the parameters I am trying to pass is an integer (in my case representing the number of passes of welds in a welded structure).  But when I supply a zero, my program reads the number as 0•m (or whatever units I set the document to. See the attached Mathcad Prime sheet.  Here is a screenshot if you can't duplicate my errorOne possible workaround is to resolve the value this way:  a / SIUnitsOf(a) That should strip any value that is in meters of it's unit, but will not work for other units like when Unit System = USCSAny other suggestions?