CAD

I have been using Mathcad for over 20 years, and currently have a support plan.  It's support renewal time again and I'm being told my perpetual license for Mathcad will expire if I do not renew my support plan. How does a perpetual license expire?       

Hello all, TLDR; excel cells in my worksheet resize themselves every time the documents is closed and opened. How to fix? ------------ I'm having a problem with some excel components I am trying to use in a worksheet I have setup.The general idea is I have set this up as a template where the input values can be easily updated, and then the user can quickly see if the desired values pass or fail.I wanted a quickly visibly colour check (red = fail, green = pass). To do this I passed the values into an excel component and used conditional formatting to change the colour of the cells depending on the value (ie if the check value that was passed in = "Pass" then the cells would be highlighted green, if it was = "Fail" then the cells would be highlight red). This works perfectly, and there's no built in functionality to change the colour of a math region based on the value of a result as far as I'm aware so this is my only option for doing this. However, my problem arises

I want to know which customers are using CREO CSL and how where can I find CSL use cases? Or, if you have a document, please share it. 

I am using Creo Parametric Release 5.0 and Datecode5.0.0.0The single sign-on is abnormal, the web page can log in normally, but the Creo side needs to re-authenticate every time

Hello Everyone.Let ABC be a triangle with Incircle ( I ), and let ( I ) touch BC, CA, AB at A', B', C', respectively, and A'', B'', C'' are the midpoints of the sides BC, CA, AB, respectively.Prove : One of the distances A'A", B'B", C'C" is equal of the sum of the two others. ( C'C'' + A'A" = B'B'' )Thanks in advance for your time and help.Best Regards.Loi.

why do the functions that are capitalized not work such as LU, SVD, Cholesky etc. in Prime 4    

Product: PTC Creo Parametric 9.0 Student Version I was reading the help about surfaces with the "STYLE" tool, but I don't get to understand the difference between triangular boundary surface, quadrangular boundary and trimmed rectangle. It is help there are not enough examples to be able to understand it. The page where I found that is: https://support.ptc.com/help/creo/creo_pma/r9.0/spanish/index.html#page/surfacing/style/Defining_Surfaces.html# Nor is it clear what the Trimmed Rectangle option is for, which explains point 5 on the following page: https://support.ptc.com/help/creo/creo_pma/r9.0/spanish/index.html#page/surfacing/style/Defining_Surfaces.html# I would appreciate it if you could clarify my doubt. Thank you.----------------------------Translated from Spanish to English at 10:33am IST on 30-01-2023. Translated by vnamboodheri using google translate.----------------------------Producto: PTC Creo Parametric 9.0 Estudent VersionEstuve leyendo la ayuda acerca de las superficies

Hi all, I have a UDF that is a sketched hole. All I am trying to do is edit the sketch to change the angle from 60 degrees to 65 degrees.   How can I modify this sketch? I know I can modify it on the fly, but I want to revise this UDF so when other people use it they don't have to modify the dimension on the fly.   When I go into the UDF Library and choose modify, there is no way for me to modify the original sketch. Also, I can't add the 60 degrees as a dimension on the family table.      

I am using Expert Moldbase Extension Release 14.0 and Datecode14.0.0.0Unable to open Creo with EMX extension. I get the following error messages:"Creo Agent did not initialize correctly. Please contact Technical Support if the issue persists."And:"Unable to start application 'EMX' due to failure in starting Creo Platform Agent."Here are the errors that I faced"Creo Agent did not initialize correctly. Please contact Technical Support if the issue persists.""Unable to start application 'EMX' due to failure in starting Creo Platform Agent."

Hello All, I'm trying to extract data from 2 variables. Example, by selecting Material data from drop down list and temperature. It should throw allowable stress value.For P11 material at 1050degF, allowable stress value is 4200psi.  Can you please help me on this problem.  

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0All of the icons in all of the toolbars in Creo Schematics are hard to see, they have no color and blend into background. I can fix this by turning off the "Dark Mode" in WIndows 10, however I like the dark mode when using all other programs and windows. I would like to keep dark mode on and still be able to see the toolbar icons in Creo Schematics. I have looked in the "Options" section in Creo Schemtics to see if I could tell it to ignore the system color/theme but I didn't see any such option. Can this issue be fixed?

HiI have the following relatively minor problem with Chart Component axis. If I let Mathcad to select axis values automatically, the maximum value doesn't show in the graph at all. If I set the maximum value of the y-axis to be 10% higher than the largest y-value, the axis values are no integers, but have decimal values as well. Is there some way to set axis values automatically, in a way that the maximum value would be shown in the graph, but also the numerical values in the y axis would be integers? In the attached sheet, there are three graphs. The first shows how the graph is shown automatically, in the second graph maximum value to y-axis is set, but as noted the y-axis values are not integers. The third graph shows how I would like the graph to look like, but I would hope that Mathcad would produce this kind of graph automatically without manual selections.  

I have this same issue. My computer died, I followed the links https://support.ptc.com/appserver/auth/it/esd/academicFree.jsp & https://www.ptc.com/en/success-paths/upgrade-your-creo-parametric/setup/download-and-install-creo and went through the installation on my new computer. However, during installation it gave me an error when I put in my SON. I went through the installation without licensing and put the license file in the PTC folder like this: c:\ptc\license.dat. After launching creo I get a license error. I think because I have a node locked license. But service won't help at all because I dont a have maintenance subscription. I paid for a permanent license so I feel like this is some sort of illegal loophole they have going. I'm assuming I need them to release the license from my dead computer so I can activate it on my new computer. Any ideas? I downloaded my license again from my PTC login but still no luck.

I need to get data out of an MCD file. PTC MathCad Express Prime 8 cannot open MCD files, so I was trying to convert it into an MCDX file first. When I try to use the "XMCD, MCD Converter", I get an error saying "Unexpected error encountered during conversion". How do I resolve this?

Need to algebraically solve for a variable in prime In legacy MCAD it was symbolics,/ variable / solve where you highlight to desired variable In prime I see Math / Symbolics / Solve But this does not work as legacy MCADIs this possible in PRIME    

Hola,since PTC offer Home user Creo license program for personal use I am curious why doesn't support Windows Home editions as well? There is official support for Windows Pro or Entrerprise only but many users have installed Win Home on personal computers. Anyone tested Win 10 Home with Creo?My experience with Creo 6.0 on Windows 10 Home is one big fail so users with Home Win edition are probably disqualified...

I am using Creo Parametric Release 6.0 and Datecode6.0.4.0We have a business configuration and Winchill as PLM (PDM). In our configuration we point to our libraries (our libraries are on windchill). We have, for example, libraries for our drawing template. But when I create a new drawing care don't reach the libraries we ask in the configuration, we reach the standard PTC libraries.This issue starts one day with no explication, I'm the only user who has this issue and we tried some re-install and install on an other computer but nothing change.

Creo View is displaying a narrow font when viewing a drawing that was exported as CGM format.The native dwg from Creo Parametric and Catia displays the font correctly before exporting as CGM. Is there a setting in Creo View that converts or shows the correct/native font when viewing the drawing?   

Hello, What would be the best way to get the inheritance part number into a drawing.  I am using creo with windchill My scenario is that i would like to be able to refer to this in a drawing automatically, i have been trying to see if there was a method with the parameters but when i create the inheritance feature, the file name is the only thing i can refer to, which the file name and PN do not always match. 

I am using Creo Parametric Release 6.0 and Datecode6.0.3.0Creo exit just after launching.Here are the errors that I facedstd.err file generated with below errorpm_is_portmapper_port_busy: bind failed, error = 10013pm_is_portmapper_port_busy: bind failed, error = 10013Recently Changed OS Version from Windows 7.0 to Windows 10.

hiiii,   I am new user of creo and i have one problem.   As shown in Photos i have one plate and one pipe part. i assemble those two parts.   how can i insert extrude with cut feature automatically when i assembled the pipe part to the plate. I knew insert the feature by UDF.   Thanks in advace !!!    

I am using Creo Parametric Release 6.0 and Datecode6.0.3.0Creo not able to start. give fatal error.Here are the errors that I facedFatal error encountered. A traceback has been written to U:/********/traceback.logPlease send it to Technical Support.

When I use Creo Distributed Batch to import STEP files I get the following error: "[-16] Error: Wrong input data format. Model Import failed" The file came from Catia V6 in AP203 with extensions v1 format. It is an assembly and can be imported manually into Creo Parametric 8.0.6.0 with no problem. I note that the ttd file in Creo Batch says "STEP 3D Import of Parts". Does that mean you cannot import assemblies in this way? I have a few hundred of these to import, so it will be very painful to do it manually. Does anyone have any thoughts as to how to import these in bulk?

Hello all, I have attached a sheet with a simple example function where the voltage jumps. This causes convergence problems.  I am working actually more complex signal at a capacitor, but I cant share my actual sheet.Basically my attached example is the same... I have waveform with a discontinuity. Later I do a derivation of the voltage signal.Also I want to do a FFT of this signal and therefore I sample it. In any way I have convergence problems and I dont know how to handle that. Do you have an idea? Here is a screenshot of the sheet in case you cannot open it:  

I've recently encountered an irritating intermittent / delayed problem using Simulate.At some stage during a session, after several iterations, the Results window suddenly refuses to open.  The button, either in the Ribbon or within the Analyses and Studies window, just stops doing anything (although I haven't tried closing Simulate and using the Simulate Results button directly from Creo Parametric).  The only solution I've found is to close and restart Creo (which is obviously a nuisance).Has anyone else encountered this?Creo 2.0 M120, running with Windchill 10.1 M040, network installation.