CAD

Can anyone let me know how to generate convergent graph in CREO simulation and how to control it in CREO simulation?

Hello,Does anyone know how to create automatically baffles to close gyroid lattice structure on inlet and outlet? In the video (https://www.ptc.com/en/resources/cad/webcast/revolutionary-heat-exchanger-with-additive-manufacturing/thank-you) Andreas Vlahinos says that it is possible to create inlet face exposed on only one fluid domain with variable gyroid thickness. I have done some tries but I am able to cutoff both or none. Any tips?

Hi communityIs it possible to drive constraint with parameter ?In my example with slider : I want to drive actual slider position (value in red circle) with parameterit is possible ?thanks

I need some helps!Do anyone know how to project members of table pattern onto curved surface?I've tried every methods comes up my mind but it just won't work, applying value-controlled feature(X-Y coordinate/width/height...etc)  to curved surface, table I need to fill is going up to 3000 rows, so table pattern is my only option I guess.Any ideas or any  other method can make this happen?Thanks!

I am finding that some edges on a simple rectilinear model will accept a round of say .125 radius on a 4 inch side, show the geometry but not remove the model material which would be gone if the round completed. I've tried starting with different simple models and it fails on some and not others. There may be a common origin of the trick edges like they are edges created by an extrude.  I haven't gotten to sorting this out. I've been running Creo and Pro/e for a very long time and have never encountered this before.   What would you look at assuming this isn't a bug?  

Hello,I'm very happy to meet you here. I know you well,you can use Creo simulate smoothly. Now I have a doubt: I don't know how to measure the volume of the solid part after deformation. May you help me? Thank you first!!!

Hi Guys,  I am trying to use solver block to find 2 variables. The solver says the solution cannot be found even though the solution exists. Please help me out by checking the constraints. Thanks,

Hello, Everyone.From the following : Plot Intersection-points of the "green" and "pink" ?     Thanks in advance for your time and help.         Best Regards.  

I am using Creo Parametric Release 6.0 and Datecode6.0.3.0There appear to be a collection of points in a sheet metal part related to the Driving Surface feature. It's unclear how they were created. They are un-selectable, and I am unable to remove them from the model.

Is there a way to show the weight of an assembly simplified rep on a drawing?Secondly, if the rep is always named the same thing in every assembly, can it be automated from the format?

My company recently switched from Creo 2.0 to Creo 7.0. For the past few months I have had Creo 7.0 installed for the purposes of testing but just this week we switched over to using it for production. Up until this point I have just been using it for modeling and FEA work and never had any issues but today several people started using it for drawings and we have found a way to crash it consistently. To crash it we simply insert a custom symbol, middle mouse click, and the screen completely disappears. There is no error message and the program is crashing so quickly that it doesn't even generate a traceback.log file. I have been trying to troubleshoot this issue all day and I haven't had any luck. I tried all of the usual things like updating video/system drivers, setting "graphics win32_gdi", reinstalling creo, removing all customizations, verifying Windows system files, running a memory check...pretty much everything I could think of to narrow down a video or system issue. 

Does anyone know how to filter all solid lines to layer? What filter should I select in "Look for"? Same goes for hidden lines and xhatches.Selecting Draft Entity does not work.I want to move all solid (continuous) lines to one layer, all hidden (dahsed) lines to another layer, etc. I can  do this for centers, text, symbols etc, bit for these three (solid lines, hidden lines and xhatches) I have no clue what to look for. Sometimes, I wonder if PTC has a clue ... 

hi, I want to move my pipeline from assembly to subassembly, now I am not able to do so because of assembly reconstruction errors, please help, attaching a snapshot for what I want to move, I have created a new sub assembly with default constraints, but still not able to move my .prt pipeline into this new sub assembly(hose_routing_1.asm), I have made entire piepline in the current assembly     

Hi ,When feature is suppressed , opening a drawing giving such type of warning , How can we avoid such warning ?Regards,Nimish G.

Hi, I'm trying to convert some excel sheets into mathcad,this particular one uses the summation function for variables features to be included, I've set up a table list to define the variables, these are calculated earlier in the document so I didn't want to simply input the values as they could change. I'm having trouble with a fewof things1. if i include beta.yi in the equation it displays the result as a matrix rather than a single answer     a. I've managed to crowbar this to work with beta.y which as it is the same for both values (50 deg) to get a result but i'm aware that this isnt the correct final solution2. the summation results are double what i am expecting, by tweaking the "n" value from 2 to 1 the results match but don't match what i understood how the function should work as    a.      i=1           the starting value of the summation    b      n (n=2) 

Has anyone come across the issue of a STEP file being a facet model?Have you seen any log file like the one on the left?I've had a few different people on Creo 7.0.4.0 and Agile PLM MCAD 3.6.3 inadvertently create STEP files that are facet models.They did create STLs of the models at one point.The STEP log file even shows the facet itemsI'm unable to reproduce this issue, or even a log file that looks the same.Import of STEP file: This is the facet STEP on left and regular STEP on right. Notice all the PLM-type attributes, like APPROVAL (yes these are from different PRTs)    

I'm trying to insert an Excel component in Mathcad Prime 7.0.0.0, and I keep getting an error that Excel is busy.  But Excel is not running.  I have checked the task manager, and Excel is not open.Even in the list of background processes, Excel is not running.   Read Excel seems to work fine.

When I want to apply a posture to a manikin in a Windchill linked session it reaches out to Windchill to grab the posture thumbnails. If I scroll down then it closes the drop down box while it reaches out for more postures. I end up having to do this 5-6 times before I can get all of the postures loaded and to the bottom of the selection drop down.   Is there something I can configure to improve this?  

I'm playing around with selected elements of a vector, or array.  Suppose I only want elements 2..6.  Why does Mathcad fail when using a range for the index, but defining an index as a range does not?  Curious.Thanks in advance.

It would revolutionize PTC software if corporate would treat customers like customers instead of like guinea pigs.  Do the QC before releasing new versions.  Or, pay customers to find the bugs — and pay them out of the executives salary so they have some incentive to do their job and release usable software.  Perhaps such a remarkable concept like testing internally to find bugs is beyond corporate comprehension, but it would truly revolutionize customer acceptance.   1. Describe your environment:  What is your role in your organization?— I'm the one who has to make it work in spite of the bugs and garbage delivered. 2. What version of Creo Parametric are you currently running?— 9.0.2, But it does not matter, it's been the same for 25 years.3. Describe the problem you are trying to solve.— For all the bragging PTC does about working smarter and faster, the bugs, the inconsistencies, the UI hiccups certainly fly in the face of all the bragging.  It would ge

I am using Creo Parametric Release 4.0 and DatecodeM140We are using creo parametric software.We are planning to send the assembly model to another customer. During model conversion we want to save the assembly model as single solid (IGES or STEP format) with out internal parts (only outer view geometry only).For the above requirement we are not able to save the assembly model in creo parametric.Here are the errors that I facedNot able save as assembly model as single solid file without internal.

By right clicking on a datum plane and selecting "Move Datum Tag", one can move the text location and Creo will connect the text with corner of the datum plane.But how do you move this tag back to its default spot and remove this irksome line?(Creo 2.0 M200)

Hi!   I have very basic questions and problems with summation operator. Please see the attached worksheet for examples. First question, I'm not just able to understand how the high lighted sum (13) is calculated?   Second example is shown also in the worksheet. How would you use the summation operator so that you could prepare worksheet template and define the n in the beginning of the calculation and then the formula adapts with the amount of n? I mean so that you don't have to change the formula by hands every time the n changes?   Thanks in advance and sorry for the beginner level questions 😣   Br, Harri

 Hello How can we add stud in Creo IFX lib. There is an article which states that it is not available  yet. https://www.ptc.com/pt/support/article/cs336035 Is there any workaround available  

Here's what I found in my pantry!Happy New Year!