CAD

My Dell Precision workstation has a Quadro RTX5000 .... It's amazing to use.  I spoke to an Industrial designer friend at Dell before purchasing this laptop and he said never skimp on a video card so I didnt.     3840 resolution on a laptop!   So I was thinking and after using it for the past few years of a few enhancements that might be noted for future releases of Creo.   I thought I would bounce just one by the folks on the forum.  So many probably don't know that if you draw a line in sketcher that you can change the linetype *ptc calls incorrectly a 'linefont' .... One can also change color.  I also want to also change the line thickness and have a few selections or even be able to increment thickness of lines.  Maybe a developer would consider an option to have the line weight pull thru surfaces or solids as if the surface or solid had a slider for opacity.   Thoughts? One Creo 9.0 question:    I

I have seen compound IF statements that evaluate numerical values.  e.g.  if (a=1,2,3) How can I construct a compound IF statement where the variable being evaluated is text?  I want the IF loop to run if the text value Fault is A or B. e.g.  if (Fault="A", "B")  thanks,relayman p.s. Prime 8

I have that issue. Mathcad prime 8.0, excel 365 64-bit. Does anyone know why this happens? Thanks in advance.

As per the original post.    Hi VladimirN,   I am currently using Mathcad Prime 8.0.0.0 with a trial license. I am having an issue with the Excel component and am receiving the error mentioned in the article. However, I do not have permission to access the file as I am on a trial license. Would you be able to recommend any possible solutions? I am using Office 365 and have updated to the most recent version. I have also tried restarting my computer and have tried the Excel component on multiple worksheets with the same error.   Thanks!

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0I cannot save the file (model, drawing) or upload it to the serverHere are the errors that I facedServer error: Cannot retrieve family table neutral data

hello friends how to we change the primary axis word form C to B in the creo post-processor??  thanks asif  

This is a quiz for age 12. How to solve this by using Mathcad?

Hi, I am an Schweitzer Engineering Laboratories, Inc, i don't have the product code. I am trying to do some basic calculations. i was not able to create the custom unit for the thermal resistance, which is used for calculations in estimating the junction temperature in MOSFET.Theri is some unit conversion problems if I add 1 deg C to 5 deg C the result not 6 deg C instead 279.15 deg C. There are other errors, I really need the help in completing a project, my Email ID is: anuroop_reddy_dasari@selinc.com.

We are trying to send the project to some of our suppliers so that they can manufacture it based on 3D. Currently it receives the models in the STP extension, but when receiving it, it complains about surfaces that are divided. Below is how the part looks in CREO. Below is how the supplier receives the part after importing it, it uses Solidworks. the files are exported as shown below:  Is this a configuration of CREO itself or is there a way to remove it?

Hello   There seems to be a calculation error in my fred (marked with red box).   When I do hand calculation / Excel-calculation the value is ca. 1.68. It is correct that the units drop out of the function as I hand calculated.   Could someone figure out the problem?   *here are again the inputs  rho = 1.2 [kg/m3]  ze = 7.64 [m]  zg = 380 [m]  alpha.r = 0.19 [-]  qp.0 = 0.9 [kN/m2] or ca. 91.74 [kgm/s2/m2]  f0 = 1.64 [Hz] or 1.64 [1/s]   Best regards,   Samuli Turunen

I am using Creo Parametric Release 4.0We are having issues creating a new user and was wondering if we can get some assistance. We do not have an admin account available in Creo but we do have admin access to the windchill server. I was wondering if we were missing something with adding a user and can add it through the windchill server. Or is there a way to add a user in the application itself

We have parts that were last saved in Wildfire 5, about 11 years ago. When we open then today in Creo 4 and make a change to the sketch or even a Save-As, Creo 4 will crash.  We have cleared all workspaces for the user, and deleted the cache files from disk. We tried the following config.pro settings: enable_opengl_fbo no enable_opengl_vbo no enable_opengl_shader no graphics win32_gdi Neither one helped, the Save-As on an existing part will crash Creo. The weird thing is that it is only 1 user. I can open the same files on my computer and do a Save-as with no issues. It is a newer Dell workstation that IT has rebuilt with Windows 10 and I am guessing newer graphics drivers. The user windows profile is created new the first time a user logs onto a workstation, so that is not it. But with it still crashing with the graphics config.pro, that should not matter. Has anyone seen this where it is just one user having issues.

Hi Everyone.I am on Creo 8, and have an assembly with family table.I have created a Pro distributed batch file to export all the family table assemblies to STP format.Is there a way to get the batch file to read step export profile settings I have set in my config.pro  What I am trying to have is the STP models to retain the colour schemes I have used in the Creo model.I can achieve this on an individual family table assembly export model, by save a copy to STP file, and with the selection of the options tab brings up the "step export profile settings" dialog box. By changing the Application protocol to "ap214_is", and saving the profile. This exports the creo model to STP keeping the colour scheme.   I want to be able to batch export to STP using this ap214_is protocol..Any suggestions on how to do this, would be greatly appreciated.

Is it possible to set Page Size larger than 11" x 17"?  My goal is to move the dashed page lines off the screen.  If I have a plotter that prints ARCH E (36" x 48") I should be able to tell Mathcad.  thanks,russ

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0I was able to create relay symbol in variable group but in a relay set the designator should be same but here its incrementing while placing each piece of symbolRequirement is all 3 pieces of symbol should be with the name ‘RLY01’.Here are the errors that I facedAll the symbols in a variable group should have a same name when placed in drawing sheet

I am using Creo Parametric Release 8.0 and Datecode8.0.2.0   Please contact us if you have any questions regarding the document. How to solve cs349558 document? Translated the below sentence to English using google translate. Translated on 20-12-2022 at 11:56am IST by vnamboodheri:- 문서중에 문의사항이 있어서 접수합니다. cs349558 문서의 해결방법은 어떻게 하나요?

I am using Creo Parametric Release 6.0 and Datecode6.0.5.1Import image on sketch in order to copy a new profile ( sketch) and create a new geometry

Creo Toolkit registry file xxx/creotk.dat : application 'xxx' failed to start; see trailfile for details. I am receiving this error when I am trying to launch some OTK dll script in Creo 9. I am using Object Toolkit C++ on Creo 9.0.1.0. I am updating OTK scripts that all worked successfully on Creo 5. However, now, after updating everything, I can get the DLL's to all compile successfully, but after unlocking the scripts and registering them in the Registry file, only some work while the others receive the above error. Is there another location where the error details appear so I can do some more trouble shooting? Any and all help would be greatly appreciated. Thanks,Mark Hardebeck

is there any way to show zero place tolerance in the tolerance display? thanks,Rich

I am working through the math equation entry tutorial and the operation of Ctrl+Shift+I to enter a definite integral into my equation returns a popup about a problem in AMD Adrenalin software related to screen capture to change a setting but I went into the AMD software and can't figure out how to fix the problem.

I need to download the installation package

I fully understand that Creo 5 is NOT and never will be supported for using with windows 11. I have a lot of reference data stored with a fixed licence for Creo 5, and I only occasionally need to view and maybe export some data from the archieve. Can anybody indicate if Creo 5.0 will at least load & function on a Windows 11 operating system, or do I need to ensure I maintain a Windows 10 work station for as long as possible.?

Hello Creo Community members, I am currently working on  parametric model. This model changes according to relations and thus, we can create multiple variants. Now, I need to solve problems with purple (not regenerated) dimensions which appear on drawing when I change between different variants. I used drawing program to create combinate states to control purple linear dimensions. But this is not working for ordinate dimensions, which I need to use.I used all model dimension in the drawing that I could to avoid regenerations issues...Is there any way to remove all the purple dimensions at the same time, so that the model user doesn't waste time removing them one by one ?Thanks in advance for your contributionPeter

HI,  Does anyone have access to the structural engineering worksheets? I am after a Eurocode Wind load and moment frame example? These are not in the civil sheets and I can not find any to purchase on the site. Any guidance will be appreciated.  Thank you,  Casper 

We are using Creo 7.0.1.0 and our custom CREO files like config.pro, .DTL, Start part/asm, Drawing templates are kept at OneDrive location.All users having read access to this location and fetching files from here. (used environment variables)In CONFIG the font directory is set to “C:\Windows\Fonts” and in DTL “default_annotation_font” is set to “romans__.ttf”.This configuration is working good for all existing users and we were adding new users as they join and also working as expected.but recently few new users (not all new) are facing issue in setting up the default font to “romans__.ttf”.when these users open existing drawing or create new drawing the font is not our standard font and shows font name “AS IS”We have tried setting up the font from drawing detail option where value present was “font.ndx” we applied “romans__.ttf”, after applying font when we reopen the drawing option the font is again set to “font.ndx”.Don’t know why this is happening, is there new patch applied or so