CAD

Sometimes you need to clean up CAD data before sharing it with a third party or you would like to update Start parts templates and remove old PDM parameters. You need to Set config.pro options: dm_emulate_ilink_sys_parameters=yes allow_create_pdm_param=yes  

Hello, I am using mathcad prime Prime 11.0.1.0.  Every time I try and print it crashes, even if I cancel the dialogue box.  Any one else seen this issue? Thanks

I want to convert part/assembly file into pvz file with custom proepview.pvr file, and i don't have a permission to change anything in "C" drive so i was planning on setting it up in a other drive but i cant find any specific setting/config... so is there any option available to set configuration for your custom recipe file??  

I have been using Mathcad Express for a while. However, my laptop with Mathcad Express had some issues. So, I purchased a new laptop and tried to install Mathcad Express on my new laptop. I uninstalled Mathcad Express in my old laptop, but I now cannot activate Mathcad Express on my new laptop. Can you help me with that? What should I do? Thank you.

When I create a new hole in a creo model, is there a way that I can default to "Type - Standard" and also have the "Size - Thread type:" already looking at the correct .hol file? Right now it defaults to "Type - Simple' and "Size - Thread type: ISO" Thanks for your help!

Discover how Skarper’s ultracompact clip-on disc drive turns any bike electric, combining sustainable design with Formula One-inspired engineering for urban riders.    

This is an extension of a previous post where I worked on a complex task (for me!) to calculate the soil weight and area behind a wall. referenced post and solution are located inAlgorithm-to-Calculate-Soil-Wedge-Area-Weight-and-Centroid The post was brilliantly solved by @Werner_E . At that time, the wall had a simplified geometry with just one course. Now, I need to apply similar logic to multiple courses, which requires repeating the process for each course.I would appreciate any assistance on how to adapt this logic to handle multiple courses, potentially up to 9 courses.

Hi everyone!I need to copy multi Holes as in picture. I'm using Creo Elements/Direct Modeling 20.7But, I didn't find out the Pattern or Multi-Copy function.Could you Instruct me the step or Document to take?Thank you

Hello, I need to download Creo Launchpad Free Trial. I entered the launchpad form on Thursday and it has been 2 business days since I have done so, so I need that downloaded ASAP. Thanks

It seems like the stock table does not consider AFX created plates, only beams. Is this correct behavior?Another thing I wonder is if there is any possibilities to export the stock length info from the model itself to a text format, so I don't need to go through a drawing to get this information?Thanks!Regards Yngve(Creo Parametric 11.0.4.0)

Goal: One drawing format which will populate specific data and not matter if the drawing model is a single part or an assembly. Using a repeat region I am trying to pass model material along with a few other items into a title block.  I can successfully make this happen byUsing 2 different formats so the repeat region calls outmbr/ptc_material/ptc_material_nameasm/mbr/ptc_material/ptc_material_nameUsing 1 format, but making all drawing models assemblies so that the item 2 always is present.Is there a way to use repeat region relations in order to have a single format with a repeat region which works if the drawing model is a part or an assembly?  I'm not sure if it is even possible, or if I simply am having an issue with syntax and formatting.

Hello Community, We have many parts that were created in an old version of Creo when there was no multi-body function yet.All of these parts have the color assigned to the part level.If I now change the material, the new material color is assigned to the body level.However, the old part color remains in the model.When I export a STEP file, the old color of the part is used and the new color of the body is ignored. Yes, I can manually delete the color from the part level, but that takes a lot of effort for each part.Is there a way to automatically remove the part appearance color from all parts?Or is there a way to apply the color to both the body and the part when assigning the material? Thank you!  

Hello,I'm having trouble activating my newly bought license for Mathcad prime 11.0. I had a license for Mathcad 10 on a different pc which worked without any trouble. Now when trying to acquire the new license for this version on a new system, it just gives me the error: "You have reached the maximum number of license requests available for your product type" I have been troubleshooting for some time now but without luck. Sincerest,Mikkel

LICENSING ASSISTANCESubject: Request to Rehost Mathcad 14 LicenseMessage:I need assistance rehosting my perpetual Mathcad 14 license. The original computer was wiped and reinstalled, so the original hostid is no longer available. My account shows “not authorized” when I try to access License Management.Here are the details:• Product: Mathcad 14 (perpetual license)• Original hostid in license file: 1866:9A27• New computer hostid (MAC address): 1659D1D0F009• I need a new license.dat file generated for this new hostid• I still have access to my PTC account and can verify ownership if neededPlease rehost the license and provide the updated license file.Thank you.

I would like to know best way to create .nwf file from excel file for creating cabling through logical data.

I recently purchased a laptop running Windows 11 Home. I installed Mathcad Prime 10.0.0.0 using a university license provided by my university in Denmark.The problem occurs every time I try to save or export a file — the application crashes immediately. This happens consistently and makes the software unusable for my studies.To rule out system-related issues, I have:Fully reset my laptop (clean Windows installation)Reinstalled Mathcad Prime 10.0.0.0 after the resetDespite this, the problem still occurs.

Hi, it was requested on my company to focus on Mathcad for calculation of new designs.It is a great tool, but how can I replace Excel in a inductor design like the image attached?Where I need/can see the different designs all together to evaluate them.Here we use Mathcad Prime 10.0.1.0. Thank you for the support.  

I have been trying to follow some previous discussions on creating a tube profile, but haven't had any luck: https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-4-0-Framework-custom-tube-profiles/m-p/675536 https://support.ptc.com/help/creo/creo_pma/r7.0/usascii/#page/advanced_framework/About_Saving_Advanced_Framework_Customizations_Outside_Installation_Directory.html# Following the instructions, I have copied the customization folder to a network drive, however I noticed that the customization folder did not contain the three sub directories (*see attached) as mentioned in the instructions--they were separate.  I tried dropping them into the Custom folder on my local copy.After making a copy I tried two things: 1.)making a new folder directory and then copying and editing an existing profile2.) adding a size to an existing profile neither has worked. I have mapped the customization folder in the afx options with no luck.  I have also tried

Happy Holidays from the Mathcad Team!     Download the worksheet to see how our holiday snowman worksheet was made, with how the slider, checkbox, and plot work together.

Hello, is there any possibility to read files from network drives? try { print(readFileAsString("\\\\10.170.84.24\\Standard\\ProE_standard\\Relace\\Relace PRT.txt")); } catch (e) { print("FAILED: " + e); }  I need to read fresh relations so all models actual relations. The only one place in our company provides relations is network drive.

Hi, Can someone help me to create a relation in a bom to change a parameter to another number for cage_code? I have something at the bottom of the relation in the bom table that is obviously incorrect. I have attached a simple drawing in creo 8. If you can perform the task and return to me then I will understand how it is done. Should only take a guru less than 5 minutes. Wayne

问题反馈：Creo tf_a4.frm 模板工程图 start 定位注释消失致 SVG 导出 BOM 偏移问题现象：使用 tf_a4.frm 最新模板制作带爆炸视图的工程图，为满足 SVG 导出需求添加「start」定位注释符号；执行【工程图保存 + 关闭 + 拭除未显示】操作后重新打开图纸，会触发系统弹窗警告，无论选择「继续」或「审阅」，添加的「start」定位注释均直接消失；最终导致该工程图导出的 SVG 文件中，右侧 BOM 清单位置出现偏移，无法正常对齐

Hi,I am looking at converting a large number of legacy mathcad files to mcdx files. When I try to run the converter, it fails pretty much immediately, with an error: System.Runtime.InteropServices.COMException (0x80040CB6): Unknown Error at mcautomation.IMathcadWorksheets.Open(String pFileName) at ConverterLoader.Xmc...Please can you advise what the issue might be here?ThanksJames

I'm relevely new to Mathcad. and today i run into a weird issue.I have created a plot. and the first trace works as expected. The second one... the data is there but it isn't plot the way as i expected.With symbols on i see the dots. but the line in between isn't plotted, and i don't have a clue why it isn't plotted at all.I have tried to change the circle to also have 3 points what works perfect. The example here defines also data and works also. I tried changing data; plot types; etc, but nothing works.I hope somebody here has an idea

Bonjour,Je suis un ancien employé de PTC et j'utilise CREO dans un but purement distrayante  sans aucune intention commercial ou industriel . J'utilisais la méthode "Request activation key". Cependant cette méthode génère maintenant un code error 520 et je n'ai plus accès á CREO. Merci de votre aide Victor Lopes