CAD

Hello Community, I have edited several PVZ files in Creo View MCAD, and added further assemblies, also from PVZ files, via "Add Viewable to Session". This has worked perfectly for months. Now, however, the added viewables have suddenly disappeared from the corresponding PVZ files that they were added to ("parent files"). However, the added assemblies are still visible in the thumbnails of various annotation sets of the respective parent files. Based on the previous experience and on this help text, I assume that viewables that have been added in this way are stored inside the parent file, so that the location of the added assembly does not matter after it has been added (as would be the case, for example, with Microsoft OLE Object Linking and Embedding).The shared location of the parent file and the added viewable has changed in the meantime, but both are still in the same file folder together. What could be the reason that the added viewables are suddenly no l

As per this thread - same issue   Thanks very much and sorry for the late reply.   Is there any way to also hide the labels about version, filename etc.?  

I am using Creo Parametric Release 6.0 and Datecode6.0.2.0After installing Windows 10 21H2 update to build 19044.2006 anytime Creo (Parametric or Simulate) is started an error "No write access to C:\Users\Public\Documents" is displayed. Directory permissions are ok and user can manually create folder sand write files to that directory. Able to proceed when browsing to and selecting C:\Users\Public\Documents.Also now when trying to create a part with the default template New File Options are required, was never required before.Uninstall and re-install of Creo does not fix the issue.Here are the errors that I facedNo write access to C:\Users\Public\Documents

I am using Creo Parametric Release 6.0 and Datecode6.0.1.0The link to the Training Documentation on this PTC Website is not working

I am using Creo Parametric Release 4.0 and DatecodeM150GPU RENDERING DOSENT SUPPORT PROPERLY WHILE RENDERING. WHILE RENDERING, UTILIZATION OF GPU IS @ 0% ONLY.

Using Creo 7.0.5.0 I have a situation where I'm making a rectangular base plate for a table-stand. The plate has 2 mm chamfered edges and the 8 corners should be chamfered as well (see image below). However, this requires not less than 8 separate features which are tiresome to create. Not only that - the dimensions are not remembered between each corner, they can't be mirrored or patterned either. Not even if an existing Corner Chamfer feature is copied and pasted to another corner the dimensions are kept (so what the point of copying it?).  Anyone who has a simple solution to this?  

 Could someone explain, please, how possible to build two or more curves at one graph (plot) in MathCAD Prime? "This variable is undefined. Check that the label is set correctly." the error message is shown.

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0i updated Creo parametric to 9.0.2 and i found an issue that my collegue with version 8.0 and 7.0 are not able to open the assembly

I can not use mathcad for 30 days

Nx has centering options with two faces of fixing and two faces of centering(moving) faces. So it is very simple to center a body between two other body

So I have marked up a model with annotations and notes.  The engineering has recently updated from rev A to Rev B.   Is there a way for Creo View to update the engineering while still keeping the annotations and groups of the previous version. Or is there a compare function I could do that would compare part numbers vs the location and have another PVZ of the changes B had to tack on to Rev A? Thanks,

I have installed Mathcad Prime 8.0.0.0. So before buying it I wanted to try it. But when I try to assign value to some variable, for instance when I write x := 5 it instantly crashes, giving this error:An unhandled exception occurred on the dispatcher thread.and then it directs me to logs. Logs are too long to include here and I have no idea what's causing it. As you can seeI will not buy the product unless this issue is solved. I appreciate your help.

The license request failed after trying to install on my local hard drive. Error below.11/3/2022 9:59:54 AM : The license request failed.Requesting MathcadPrime ...C:\Program Files\PTC\Mathcad Prime 8.0.0.0\sw_license_email_14225.dat: (-10) Feature has expired.

Whenever I export an animation which I did in PTC Creo Parametric 8.0.4.0 and I want to select a compression method, Creo crashes.  Does somebody know how to fix that?

Just started to use MathCAD Prime v8.0 (before were using MathCAD 15). Is it correct, that if variable has a subcript, then the "Find" function for this variable does not work?Just if it true, it does not make sence to use this software -> because user cannot trace the path of this variable in the entire document. 

I am converting files from educational to business licence, using EDU_COM_Convert and setting the parameter 'rename_drawings_with_object' to 'both'.I have an issue with automatic conversion of assemblies and the relative drawings (saved with same filename, different file extension).I noticed that doing 'Save a Backup', I automatically get all subassemblies and parts but do not obtain drawings, while when doing 'Save a Copy' I get drawings but not all subassemblies.Is there a way to convert all parts, assemblies and drawings all at once, avoiding manual saving?Versions in use: version 7 educational, version 9 business.Thanks for your help in advance.

To create a BOM in a detailed drawing you use a parametric table called a repeat region.  From what I have read, using MBD  the BOM should be attached to the assembly in some way as an annotation maybe.   Anyone have any comments on this ???  Maybe I'm missing something or we are not there yet in creo 9  thoughts?   Maybe I need to join the MBD technical committee  😉  Bart BrejchaDesign-engine.com

Hi everyone, I'm curious if Creo Parametric supports hiding datum points based on the orientation of a solid body to the current display view. In short, if I have a field of datum points on one side of a solid body, then rotate the solid body such that the body would occlude my vision of those points - could Creo be configured to hide those points? The reason I would like this functionality, is that it can help with visual orientation of the part. Consider the image below - I have a feature of datum points one side of the part.Orientation 1Currently, if I rotate to the part to the orientation shown in the next image below, I will still see the datum points.Ideally, I want is shown in the final image below, which will hide the points when I rotate to a view where the points would be hidden (like the smiley face sketch). (NOTE: I'm currently disabling the display of all datum points in this image). If you have any ideas, I would greatly appreciate it! Thank you all.

Hello Everyone,In a mechanism (no resistive forces other loads), if I provide a servo motor to a rotating link, it behaves as expected where very minimal forces are generated in links and I believe servo motor just gives enough power/velocity to cause motion. So If i put a measure for reaction forces at various links, the force values are very less. However, If i replace the servo with a finite value torque motor, reaction forces (equivalent in the order of a static case) are generated in the links even when there are no other resistive forces.  I would be much obliged if anyone could explain the above. Thanks in advance

Hi,I am not familiar with the Meccanism module, so I ask for your patience.I applied a motor to a rotating body by defining the trend in a table:Still from the engine definition tab, I see its graph and so far everything is ok.My problem appears when I ask the program to detect the measurement of the motor speed in a kinematic analysis, I get this result. I would have expected to obtain a graph similar to that of the engine and instead they are different, why? Thank you.P.S. I'm using creo 9.0.0.0

I'm finding my main Figure in a sequence changes randomly as I am creating a sequence of steps. As an example;Create a figure and set the visibility of parts on the sBOM and click 'Use current View'Go to animation tab, start creating a SequenceOn the first step, fade most components out while recording so there is a key frameContinue to add components on subsequent stepsAt some point the main Figure either explodes components or starts hiding componentsTry and set the main Figure to have correct parts visibleClick onto any other part of the sequence and return, parts are still invisibleI'm finding this behaviour to be a bit erratic between parts hiding and parts being translated to random locations. The biggest frustration is with translation as when I try and edit the part translations in the Figure, it propagates through the sequences in an undesirable way. As it stands, all my sequences start with a random image that is not representative of the subsequent sequence steps so it's qui

I am trying to design  on creo 7 and my computer freezes whenever i select the custom lattice option. Anyone knows what the issue is.My  computer specs: Hp dv6 Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz 2.40 GHzRam: 8Gb

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0creo草绘环境，调用ProSectionEntityAdd创建文本时，选择字体，列表中的字体，除了font和font3d能创建成功外，其他的字体类型，都返回错误PRO_TK_LINE_TOO_LONG。联系人：郑小芳，联系方式：Here are the errors that I facedcreo草绘环境，调用ProSectionEntityAdd创建文本时，选择字体，列表中的字体，除了font和font3d能创建成功外，其他的字体类型，都返回错误PRO_TK_LINE_TOO_LONG。联系人：郑小芳，联系方式：   I am using Creo Parametric Release 6.0 and Datecode6.0.6.0 Creo sketch environment, when calling ProSectionEntityAdd to create text, select the font, the font in the list, except font and font3d can be created successfully, other font types return the error PRO_TK_LINE_TOO_LONG. Here are the errors that I facedCreo sketch environment, when calling ProSectionEntityAdd to create text, select the font, the font in the list, except font and font3d can be created successfully, other font types return the error PRO_TK_LINE_TOO_LONG. Translated by Iuliana Lazar with Google Translate on 04 nov. 2022

I am using Creo Parametric Release 6.0 and Datecode6.0.2.0I have a weird problem with a Creo PC. Let me explain:the PC in question (PC0008) has installed Creo 6.0.2.0, and 2 license :one fixed for Creo Parametricand one floating for the machining Option (we have 2 CAM licenses installed on the license server).However, the PC takes both licenses from the server and since on the server we only have 2 floating licenses for the CAD, it often gives the message that the license is not present and close.until a few months ago everything worked correctly, but now I have been told that it loses the license so I checked and I see that it also takes the PROE_Essentials license from the license server ignoring the locally installed licenseP.S. Since the Machining Option licenses are used only by 2 PCs and no one else, wouldn't it be possible to change these 2 licenses so that they can be assigned and installed directly on the machines concerned?

How to implement the frequency response calculation and graphic plot of Fourier Transform and Laplace Transform in our Mathcad tool  ?  Need  sample file for example with explanation!   Thanks in advanced! Evan