CAD

Hello, We are setting up repeat region BOM tables. Our standard is not to put a "1" on a balloon if the qty is only 1 each. Is there a way not do display a quantity of 1 and still keep the tie to the table?  

I created numerous tapped hole patterns and added GD & T call out with no problem. On this hole pattern I cannot add the GD & T call out,. It is asking for a dimension reference. I have tried picking the dimension, but will not work. e other patterns did not require me to pick a dimension? What am i doing wrong

I am using Creo Parametric Release 8.0 and Datecode8.0.4.0we have Creo 8.0.4 in a network installationin the new workstation Creo live simulation doesn't work good and take more than 15 minutes to start an analysis in Creo simulate (a simple analisys with a cube with one side fixed and one force on the opposite side)the GPU seems to doesn't work and the and all analysis are made by CPUthe graphics card is a NVIDIA A4500 (ampere architecture) with 20 GB RAM, the cpu is a XEON W2223 with 64 GB RAM.in the driver i have activated all option about CUDA to enable it on all application, the Nvidia driver version is 472.98the same network Creo installation, in an old workstation with an QUADRO RTX 5000 and driver 462.31 works good, so i think that is not a problem about Creo configuration, otherwise i coulnd't work in any case.i've verified the driver option in the workstation where Live simulation works and i have the same option activated on new workstation.in my config files i activated the

Hi, I'm a new user, and I have a little day left on my trial software, before I decided on Purchasing this Match Cad Software. I try to use in finding the "d" on Punching Shear for a spread footing using WSD, it happens it turn into red, at it says unit problem. Does anybody can help on me to this issue.? Thanks

I need a product, and I am also not able to open an .XMCD file.

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Unit of measure to be shown as parameter in the drawingHere are the errors that I facedUnit of measure to be shown as parameter in the drawing

Hi, I am a new user in this software, does anyone can help me on how to manipulate the syntax on Solve Block? please see attached file for reference. 

How to I maximize result for the equation 

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0We are getting the transaction log for the wtuser database filled up error.This morning I tried to shrink the log file, and it helped for 5 minutes. Then I truncated the logs and it helped for a short period of time again. But it gets filled up pretty quickly and users can't use the app anymore.A user's report:I open PTC Creo, then click "Workspace" on the left. Then type in the search bar next to the "Quick Links" drop down menu. I search for "model*" to try and access our assembly. It then says:An unexpected error has occurred while performing search. Please contact system administrator.And that's when I click OK I get Windchill error.Exception: wt.util.WTRuntimeException: A persistence error occurred. Nested exception is: A persistence error occurredHere are the errors that I facedMSSQLServer Event 9002: The transaction log for database 'wtuser11' is full due to 'LOG_BACKUP'.

I have a drawing with a lot of parts and want to make parametric notes but want an easy way to find all the ID numbers attached to show the parametric value of each individual part. For example: &PTC_MATERIAL_NAME:300 would be one material of a part and &PTC_MATERIAL_NAME:301 would be another. Is there an easy way to find all those identifier numbers at once?  

Is there any method for creating multiple planar sections when viewing .pvz files? Are there any plans to create other, non-planar types of sections?

When editing or creating an assembly it is annoying that when you edit the definition you have to have it below everything that you may want to constrain it with. Is there a way to disable it or when you select edit definition it automatically moves it to the end of the tree. No

Hello, I am currently trying to update an old Toolkit script from Creo 5 to 9, and a couple functions,(ProGtoldataFreeStateGet, ProGtoldataDiameterGet etc.) were updated to ProGtolValueStringGet. I was looking at this article Article - CS280972 - How to use ProGtolSymbolStringGet and ProGtolValueStringSet to replace deprecated Creo Toolkit API 4.0 and onward (ptc.com) for assistance, but I was unable to discern what the actual output of ProGtolValueStringGet would be. I tried printing it out to the console to figure it out, but I also could not figure out how to get the otk_install.exe from the otk_install.sln that I am running the scripts on, to print it out. Any and all help would be greatly appreciated, Thank you,Mark Hardebeck

Hello , I'm having an error when I'm going to save files to PDF by Schematics I'm using version 4.0 is there any solution for this?

I am using Creo Parametric Release 4.0 and DatecodeM130The threaded hole displays the ribbed line in the part drawing, but does not display it in the assembly drawing, how to make the threaded hole of the part display the ribbed line in the assembly drawing-------------------------------------------------------------------------------------------------------------Translated from Chinese to English using the PTC Translate tool(Done on 10th Oct 2022 at 9:03am IST by vnamboodheri)Subject translated from "2D图纸里面螺纹孔的螺纹线显示" to "The threaded lines of the threaded holes inside the 2D drawing are displayed"Body from 螺纹孔在零件图里面显示罗纹线，到总成装配图纸里面没有显示，如何让零件的螺纹孔在总成图纸里面显示罗纹线 to "The threaded hole displays the ribbed line in the part drawing, but does not display it in the assembly drawing, how to make the threaded hole of the part display the ribbed line in the assembly drawing"  

Has anyone managed to get multi-threading to repeatedly execute the same statement as if it were repeatedly changed manually i.e. any trick that can automatically change a worksheet expression or parameter in such a way that multi-threading detects as a change and executes the expression afresh e.g. a counter that advances each time multi-threading acts on it? 

I downloaded license by WEB. When starting MCAD got error: unable to create 12.0 engine factory

I have a "never expired" mathcad 15 license, and the mathcad just notified me that my license code doesn't work anymore

Hi there, thank you for taking your time! I'd like to automate two solidify operations to obtain a-quarter cut models using mapkey.When I check the recorded mapkey the datum planes are defined as node numbers such as 'node3' or 'node1 etc.The node number somehow differes from model to model, thus I'd like to know how to pick them. It will be fine if I select a datum plane by searching its name and describe it in the mapkey script. Do you have any ideas?Thanks!

many times i tried but i could'nt upload ptc script in localhost

I am using Creo Parametric Release 9.0 and Datecode9.0.1.0I used to be able to open solidworks files from within creo. But now when I select "open" there are no solidworks options listed in the filetypes. And if I select "all files" the solidworks files still don't show up. How do I restore the ability to open solidworks files? I think this change happened when I switched from creo 8 to creo 9, but I'm not sure about this timing.

Hi, Everyone.From the following:   How to solve, N, fully (the above) ? Thanks in advance for your time and help.Best Regards.Loi.

We have drawing notes that are numbered 1,2,3, etc in a list. We then flag some of those notes with a symbol and then add a second symbol in the field of view of the 2D drawing to correlate an annotation or view with that drawing note. Sometimes a note gets deleted and then a user forgets to delete that same symbol from the field of view.   Does anyone have an automated check for checking that there are at least 2 of the same symbols? Alternatively does anyone know of a better process for achieving what we are trying to achieve?

I have a drawing which is applicable to multiple designs that use it. Creo supports import of a drawing into another drawing.  Importing this reference drawing into a new design works well except for the fact that all tolerances are removed from the dimensions when it is imported into another drawing.   Any ideas on why Creo is removing the tolerances upon import?   Creo 7.09     Ref drawing view:   Same view when the ref drawing is imported into a new drawing (no tol display).    

Our MathCAD Prime 6 installer is no longer working. When we run it, it shows as no apps available. Service Contract Number: 1R2416016; Sales Order Number: 3185301.Thanks,