CAD

I am using Creo Parametric Release 8.0 and Datecode8.0.12.0We still use a perpetual DIAGRAM license, by setting the 'enable_obsolete_modes yes' setting. We had it working a while ago but now we get the message belowHere are the errors that I facedThis functionality requires one of: DIAGRAM

Hello Everyone.From : To :  How to calculate Area of Parametric (closed) Curve, the above ? ( MathCad 15 )  Thanks in advance.  Regards.  Loi

Creo version: all versions are affectedWe have noticed that some users are unable to open Creo through the Netskope Private Access service, while others can. All policies and private app definitions are identical.The application becomes unresponsive, and users must force-close the window to stop the process.The only difference between the two groups appears to be the Wi-Fi provider they are using.Users who connect successfully and consistently are using an iPhone hotspot, while those experiencing unstable or failed connections are using home/office Wi-Fi or an Android hotspot.The issue is reproducible when testing with the same user across different Wi-Fi sources.Has anyone encountered a similar issue?

I am using Creo Parametric Release 11.0 and Datecode11.0.4.0Can not mirror part along the plane properly in assembly if selected "Reuse existing model". Works ok if selected "Create a new model". Just toggling that option creates parts in two different locations

Hi All,I’m trying to find out if it’s possible to create a new exploded view and adjust the positions of the components.I’ve created a mapkey to generate a new view, and that part works fine. However, I’m having trouble figuring out how to move the components. I don’t have access to the full toolkit, so I’m looking for creative ways to accomplish this.Any suggestions would be appreciated!

I am trying to write out the correct If statement that would calculate the Fb value depending on the user selected C value for whichever conservation criteria they choose. I have defined Fy and C and this Fb calculation would be down below this area to feed into further calculations in the document. EDIT: This is in Prime 11.0

Hello, beginner here! Can someone please help and tell me how I can generate a table or vector for my values a_hoch and a_l? I want Mathcad to calculate a_l dependent on a_hoch for different a_hoch. Is there any possibility Mathcad can do that so that I dont have to type everything individually?So in the picture a_hoch is 460. But I also want solutions for 461, 462, 463, and so on... I hope someone can help me. Thank You in advance! 

This is my first independent attempt at a dynamic mechanism analysis.I have four horizontal sliders on a slide base that has a dove tail groove down the middle.The sliders have a rectangular shape, with straight plane faces, and are all 100 mm wide.The first slider is a servo motor, start position 0 and the end position is 900.Sliders 2, 3, 4 have start positions 200, 400 and 600 respectively, and end position 900.Distance between sliders is 100 mm.I have set Collision Detection to Global Detection and to Push Objects upon collision. My starting problem was establishing the proper 3D Contacts between the four sliders, and I made a mess of it in the end.Out of sheer desperation I added masses to all sliders (picked steel in the end, as I had a lot of problems with brass, for unknown reasons) and I fumbled with Damping = 80, Young’s modulus = 2e6 to 5e6 and Poisson = 0.30 (without really understanding how these really work).This is one of the error messages from that stage:"The prop

@Jaime_Lee @vnamboodheri @anursingh @Catalina  I would like to inform you that it is not possible to add an attachment to discussion reply Example ... https://community.ptc.com/t5/Analysis/Dynamic-Mechanism-with-collision-problems/m-p/1046711  

I am using Creo Parametric Release 10.0 and Datecode10.0.0.0I want to create a limit belnd between 14 sections, the first one is a rectangle the others 13 are rectangles whose upper edge has been replaced by an arc. Creo doesnt allow me to do that. Why? whant can i do?

Hi,is it possible to perform a calculation based on an if-statement in a drawing repeat region relation?Prerequisite:Model units: mm Kg s I would like to multiply mdl_pro_mp_mass by 1000 if model parameter mass_unit is set to g instead of kg. Something like this:mass_display = mdl_pro_mp_massif mass_unit == "g"mass_display = mdl_pro_mp_mass * 1000endif It's only the IF that doesn't work; the calculation works fine if tested separately. It works in a Post Regeneration relation in the model (using pro_mp_mass instead of mdl_pro_mp_mass), but I would like to not add the relation in the model. Tested on both Creo 9.0.3.0 and 11.0.6.0 Any suggestions? Thanks in advance! 🖖

This solution is not working as expected. It will only get the properties of the active part or faceTo get the properties of the selected part or face use: (where mypart or myface is defined in the sd-defdialog) (get_vol_prop :for_part :part mypart :area) (get_vol_prop :for_face :face myface :area) (get_vol_prop :for_part :part mypart :tol :percent_tol 5 :area)  SeeIntegration Kit GET_VOL_PROP Integration Kit GET_VOL_PROP MPPASA subactionIntegration Kit GET_VOL_PROP MPFSA subaction 

Hi there,I was creating few annotation in creo drawing, so there i want to add custom symbols in my annotation.I tried to finding where this symbols are saved but i can find it, i found one way but it was for adding pre defined symbols in note (By &sym(symbol name) but that does not work for annotation.so my question is, how we can add custom symbols in annotation (i.e. in Prefix/Suffix).

Im unable to open my Mathcad Prime 11.0.1.0 Student Edition. The app randomly crashed on me one day and when I tried opening it again, it does not do anything. No white screen, no error message, nothing happens. I've tried installing Mathcad Prime 10 but I am unable to use the files that I have in older editions. I've tried multiple things:- I've uninstalled and reinstalled.- Deleted Files and tried running it.- Tried running it using different compatibility modes.- Tried running it as an administrator.- Created Backup files.- Nothing worked.- Restarted computer Again, I'm not sure how to fix this. If you could please assist me with this issue, I would greatly appreciate it. Thank you.

Hi, I used to use Publish Geometry and skeletons with my Creo3 Advanced XE.I now have a Creo7 Essentials licence.One of Optional Modules : #Optional Modules = ASSY_PERFORMANCE.But it seems that I can't use Published Geometry.Is this normal?Any advice?Thank you 

Hello everyone! Is there a way for select only a portion on a line? For example I want to select one portion of the line with one style and another portion of the same line with a different style. For now i can only select the whole line. In the screenshot i want the part in violet to be a different style from the green one part. Creo allow me to only select the whole line. I found this Advanced Selection Functions  but i can't find this menu, can you please tell me how i can activate it? As always thank you 

Hello,I'm currently working on Creo3.I have a licence file for Creo7 (permanent) that I need for a new client.I d'ont have subscription anymore.When I'm trying to add this licence file (txt) while installing Creo7, installer seems to freeze.File is for my computer.Should I remove my previous licence ?But I'm afraid to can not be able to work...Thanks 

Hi, I'm not able to show a component placement dimension (distance constraint) on an assembly drawing in Creo Parametric 10.  Would anyone know what config option needs to be changed or what I need to do to allow dimensions related to component placement to be shown?  I'm able to show dimension for feature internal to the part only. Thanks for any help you may provide,Don A

Dear community, Can someone help me solve the integral of the following equation in Mathcad 7.0.0.0? Only J(x) and tau(x) vary with x, and the rest are constants.Thanks in advance

I can't get a 72-hour activation key for Creo Elements Modelling Express (6) any more , I get a "Cloudflare Internal Error" (Error 500) I've tried re-installing Creo and re-installing Windows (8.1 on a Macbook Pro Bootcamp) but no joy. It was working fine a while ago but I read that they have upgraded their security, maybe that's the cause. I've emptied cache. and tried different browsers. Is there a way to bypass cloudflare?

I am having trouble with the scaling on flat-to-screen annotations when publishing a .pvz from Creo for viewing in Creo view. Previously I was using Creo parametric 7, and the flat-to-screen annotations would show up approximately the size in the screen window as I had it set in Creo.  After upgrading to Creo 10, the flat-to-screen annotations shrink and move on publishing. Is there a recipe file setting I can use to get them to scale properly?  Creo Parametric 10.0.8.0Creo View 10.1

There are a plethora of discussions on converting real numbers to strings.  While PTC tech support does provide two working suggestions, they are not simple.  Beyond that, I have been unable to find anything on the PTC Community that will work in all cases.  (See list at bottom.)  With that as the background, here is my attempt at a robust real-to-string function that I believe works correctly for all positive numbers.  Please test this out and let me know if you can find any errors with it.   /* Real NumberX = 12.34567 /* Number of DigitsND = 3 /* Rounded NumberRN = FLOOR((X+(5/10^(ND+1))),ND) /* String Output - No Leading ZeroY = ITOS(FLOOR(RN))+"."+EXTRACT(ITOS((RN-FLOOR(RN)+1)*10^(ND)),2,ND)   * To get a zero before the decimal point for values less than one, a conditional statement is required:   /* String Output With Leading Zero IF FLOOR(RN) == 0     Y = "0."+EXTRACT(ITOS((RN-FLOOR(RN)+1)*10^(ND)),2,ND) ELSE   &nbs

Dear ptc community, I am trying to plot a solved parameter of nonlinear equations (J) vs x (a variable that can range from 0 to 0.5. I have tried to plot it, but I got only a point rather than a continuous line plot. Can you please help me with it? I have attached my Mathcad  (7.0.0.0) file for your reference.Thanks in advance.Kind regards,Tadele

This is an annoying fringe issue. But I have tables with notes (notes have two lines of string values) and sometimes when I update a string value the note doesn't update in the BOM automatically. Nor does it update when I update tables. It seems to only update when I go to modelling and make sure it's regenerated and go to annotations click on the note and look at the text in text editor and then update tables.  Does anyone have any ideas how to fix this? Maybe next time it happens I'll check whether it prints the correct info and creo is just showing the old info.

I have an old version of Wildfire 5 still running on a very old laptop. I would like to install the software on my new laptop as the oridgal laptop is on its last legs. But because I am no longer on maintenance this appears to be impossible. Login to my account then go to support and I am hit the same stone wall, you are not on maintenance. You cannot proceed bla bla bla. Is there a solution? Please help.