CAD

The edges of this part change color between views: they are BLACK in the "Shading With Edges" view and become BLUE in the  "No Hidden" view. The edges are also BLUE in the Hidden Line view (with the hidden line correctly displayed as light grey), and completely blue in the Wireframe view. I would like to keep the edges BLACK no matter what, and if that is not possible, at least I would like the edges to be BLACK in the "No Hidden" view and whatever in the other views.I have played with the color settings for two days now, and I could NOT find the culprit among them.In my config.pro file I have:color yesgraphics openglenable_fsaa 16spin_with_silhouettes yesdisplay_shilhouette_edges yestangent_edge_display solidedge_display_quality very_highshade_quality 50skip_small_surfaces noset antialiasing mode onsmooth_lines yesWhat can I do in this situation? Any ideas appreciated! 

Is it possible to redefine default coordinate system Inability to redefine default coordinate system and change orientation

We just finished the Mathcad Virtual Conference 2022! Hooray! It was very nice seeing some of the PTC Community regulars in the Q&A.   I promised many people in the Q&A that the Design of Experiments in Mathcad Prime (Anji Seberino's presentation) and Developer's Perspective on Prime 8's Engine Updates (Anna Novikova's presentation) worksheets will be available on the PTC Community. (As well as the conference replay page and via PTC rep follow-up.) This post has those worksheets attached.   Also, please let me know what you thought of the conference! It was a massive effort to put together.   The replays-on-demand for the conference should be up at the conference page on Mathcad.com (see link in first sentence) starting by Sept 15 if you missed it.The raffle worksheet will be available a bit later in a Mathcad.com blog article. I'm going to start reaching out to the 25 raffle T-shirt winners next week, since I'm going on a vacation for the rest of this week.I kno

Editor's note: This blog article has a companion PTC Mathcad Prime 8 worksheet that can be read in Prime 8 or versions released afterward. You can find it in this post's sidebar. Calculus is a branch of mathematics quantifying the change of a function. Calculus can be broken down into two main areas: derivative calculus and integral calculus. Derivatives measure the rate of change of a function. Integrals measure the area under the curve of a function. A partial derivative involves a function that is driven by multiple variables, and we find the rate of change of one variable while assuming all the other variables are held constant. If you have ever driven a car, then you can understand the basic concepts of derivatives and partial derivatives. Let’s look at a simple example. Derivatives and Your Car Let’s say you are going to drive your car from your home to work. It takes time to get from point A to point B. You can use a watch to measure time and an odometer to measure distance. Yo

Hi all,  Can anyone suggest how to overcome the issue in the attached image. Currently using Mathcad Prime 10.  Kind regards,Iain 

I am using Creo Parametric Release 12.4 and Datecode12.4.0.0Hi,For an internal task I’m working on, I need to export an assembly from Creo and save it as a Wavefront (.obj) file.The assembly contains a reference part and multiple instances of that same part positioned differently. When exporting to .obj and opening the file, I’d like to rename these objects and have them appear in a specific order. However, I’m running into an issue where each part is saved with generic names like “Facet Feature id 41,” which prevents me from organizing them properly.Does Creo provide any way to assign custom names and control the export order when generating an .obj file? If not, once the .obj is exported, is it possible to edit the file afterward to apply the naming and ordering changes I need?Please let me know.

I am using Creo Parametric Release 7.0 and Datecode7.0.0.0Hello,We had a computer to use PTC creo parametric to design some equipements that was spendign long time to open every project, we upgraded this pc whit new CPU, RAM and GPU, but the problem persist, at the moment after many checks the PC is not having any bottleneck from this side.Could you help us to fix this problem ?This computer at the moment has:windows 11Intel ultra 7 265k32GB DDR5Gigabyte GeForce RTX 5060 Aero OC 8GThanks you in advanceKind regards

Looking to provide a sequence number above both the ratio and check matrices, see attached image, to correspond with the check list above.  I work with Mathcad Prime 10. 

In any drawing which contains holes normally (written manually (2x) M12)   How can i make the number of holes should be automatically generated ?

Hi everyone and happy new year,    I've started the Simulation Live trial program and while following the introduction course, i'm running into a strange issue : results stays at zero for any restriction/load i might try. In the information message area, i'm getting this message : The material library is not available in the current working directory or the application data folder. I've commented my usual pro_material_dir option to make sure i'm using OOTB material library. I've also tried to copy the library or the applied material file in the working directory without success.   Thanks for any help on that topic.    

I need a new license

I have bought Mathcad premium version but the premium features don't work.

I have configured my model tree with some columns and sometimes it is hard to see if the part that I clicked is in the same line of the information displayed on a distant column, so it'd be nice to have an option to add horizontal lines between columns in Creo. I will put an image to clarify what I am saying.

Hi everyone,I’m working in Creo Parametric 12 and I want to make hidden lines in my drawings more visible(you can see in photo 1 how it's now). Specifically, I want:Dashed segments to be longerLines to appear clearer for printing and on-screen viewingI think i have to add a line to my drawing settings but i don't know which one. Could you please advise how to achieve this?Thank you!

Good Afternoon,I've filled out the form and submitted a request for the free trial version of Mathcad several times and each time I get the message "if you don't receive an email in two hours look in the junk folder. I still haven't received the email. ThanksRick

Does anybody know if it is possible to also export sketches or cosmetics into a STEP file?I've tried several settings but it doesn't work. I've tried also ap214 and ap242 with "Datum", "Quilts", "Facets" and "Hidden entities" all checked but the export doesn't contain any of my Sketches, projected sketches, curves, or other 2D entities. This would be nice because we can then use it for laser engraving on our laser cutting machine. Now we are using a small cutout and then in the laser cutting software someone is converting this cutting into a single line again.

Hello Experts,I am looking for some information regarding the Creo toolkit license. I have below queries.1. Creo took kit license comes with Creo default license?2.In short say if we have Creo licenses so does this Creo tool kit license we need to purchase separately? 3.If that is the case, then which exact bundle we have purchase to have Creo toll kit development access?  

I am using Creo Parametric Release 11.0 and Datecode11.0.5.0Creo Parametric 11.0.5 appears to have a horrible memory leak. Is this a known issue? SI anyone else seeing this?

无法试用

As the song says,   What a diff'rence a dalgorithm makes.Timing in secondsOr, by hours reckoned   While developing a function to convert an array into a set, I was shocked to see how slowly some of my algorithms performed.  After a bit of playing, I suspect that fold or stack handle nested arrays and some other data types differently than they do scalars.         Stuart  

How can i use two different tolerance value by using family table relations?

hollowish tubeI use this software called TubeWorks to unbend tubes with features in them for laser cutting. The problem is the step file TubeWorks creates is mostly hollow, has no ends, and has several quilts. (see attached picture) I've tried merging the quilts and solidifying but it still comes out with multiple surfaces. Any ideas on how to turn this part into one solid piece without losing the holes? I'm using creo version 9.0.5.0.

Hello everyone, I’m using Creo 8.0.9 and I need to create a sticker adapted to the surface, but for that I’m using a decal.When the sticker is flat, applying the decal is easy, but when it’s curved, it becomes very difficult.Is there a better method?Or is there any parameter in the planar mode that can be set to automatically adapt to all surfaces?the surface its a extrude on a spinal bend

Need installation file for Mathcad Prime 10. I have version 11 but I need to share files with a client that is using version 10.

I have a drawing where I've added additional rows to the revision block (1 per revision) and filled out the information. I save the drawing and check it in but the text doesn't show up. If I add this drawing to a new workspace, the text I added isn't visible but if I click on each cell in the table row the text is in fact there. All I have to do is click it and select OK for it to become visible again but then on check in it becomes invisible. As a result, the published drawing doesn't show this information.  This is the only drawing like this... I verified that all the properties are the same as the row that is visible (row for rev A).    Making the text show up on my drawing and checking it doesn't seem to persist.