CAD

Hi everyone,I'm using Mathcad Prime Express 11 and I’ve run into a units-related error that I can't resolve.At the end of my worksheet, I'm solving a system of equations using Find(...). When I try to evaluate the solution, Mathcad gives the following error: "These units are not compatible" I've attached: the full Mathcad worksheetI'd really appreciate it if someone could help me identifywhich equation or variable is causing the unit conflict, and how I can fix it properly.Thanks in advance! 

I'm trying to add a surface finish callout for a part that gets ground. No matter what I try I can't select the surface I need. The model is from an assembly file that gets a revolve operation from a part file to show the finish grinding process. It seems like it doesn't like that but I'm not sure. Any help trying to place the symbols?

I want to install MathCad to a new computer. I keep being told I don't have access.

Attempted to load Mathcad 14 on a Windows 11 PC using the disc purchased from PTC. Near the end of installation, received the error code below. I was able to install this program on the same machine two years ago with no problems.Error1904.Module C:\Program Files(x86)\Mathcad\Mathcad 14\mcformsr.ocx failed toregister. HRESULT -2147220473. Contact yoursupport personnel.Product: Mathcad 14Thanks, Fred Marinelli

I've just dished aout another couple of grand to PTC for my Creo subscription and installed Creo 6, but am not quite sure what I am paying for. Yes, the live FEA looks great, the addative manufacturing tools might be useful, but I can't afford another kidney to pay for those modules.   What is new with the standard package, apart from a bit of menu polishing and a new right-click toolbar? The extra 5% on the subscription cost didn't go unnoticed either. I don't even get the rendering module without relinquishing the slightly less rip-off deal that I signed up for with my subscription license.   What about sorting out all the half-baked functionality? Why is the menu manager still there?   Are PTC trying to make me move to a competitor?   Sam

∠BAE=∠EAC, area BDE=1. Find area ABE.  

Description :How to load a protk.dat in Creo parametric, if the protk.dat file is at a user defined location without editing the config.pro fileUse Case -I have protk.dat file located at C:\temp & would like to load this application in Creo whenever it is launched.Also, without copying the .dat file to the <Creo load point>/Common Files/text.Tried setting up Environment variable "HOME" pointing to C:\temp, but it is not working. Thanks.

I swear this was working before, but there is no way to turn off all the coordinate systems of each part? going into each file is not really an option, there are 100+ models in my assembly and sub-assemblies.  

Hello Everybody, Im currently trying to automate the export of dxf files for laser cutting. We just use a seperate sheet in the parts drawing file with a single view of the unfolded sheet part. We always name this sheet "Laser".Now in VB, I want to search the sheets in the drawing for the one named "Laser" to identify the right sheet to export as dxf, but I cant find any class or variable in the API to get the sheets names. Does someone have an idea for this problem or knows a different way, to savely identify the sheet in VB? 

I want to update my blog on different methods of inserting images in Mathcad Prime because there is an update in Mathcad Prime 11 that changes it dramatically. Since I wrote that, I'm on Windows 11 now on my work laptop, which has Mathcad Prime 10.0.1.0 and Mathcad Prime 11 installed. My personal PC is on Windows 10 (many say I need to get a new PC within six months...) and has a copy of Mathcad Prime 10.0.0.0 on it.   Whenever I'm inserting an image via Insert Object (OLE, Ctrl + Shift + O) on my Windows 11 laptop, it no longer actually shows a thumbnail of the image no matter what image type I use and no matter what my default app for images is. It's just the generic box with the file name in it. On Windows 10 for 10.0.0.0 and I'm pretty sure for 10.0.1.0 before my work laptop got upgraded, it would just embed the image file by actually showing the image file.   I don't think anything happened on the Mathcad side to change this, and that it's a Windows thing, but can someon

Show another waveform that is equivalent to a sine wave with a maximum value of 1 and an effective value of 1/sqrt(2), and find its Fourier series so that the effective value of the Fourier series is 1/sqrt(2).   Below is an exsample of the answers.  

Hello,I want to delete only the suppressed parts from creo assembly using protoolkit.I am able to delete using the feature_ids with the function ProFeatureDelete(), But, it is deleting all the parts of the feature_ids I provide, irrespective of the status (active and suppressed) I want it to filter out between active and suppressed parts ,and then only delete the suppressed ones. Thanks and Regards,Disha

How can we convert CGM file to Step file

We are trying to use AI assistance for CAD(Creo/Solid edge/Teamcenter). Please let me know, If anyone has done recently.  or can help us or provide examples VennyTexas

Hello,I know the config option sketcher_refit_after_dim_modify to modify dimension without refitting the screen. But I need different option. I would like to start sketching without refitting. When I hit sketch button, whole part/assembly is fit to the screen, but I would like to not do so and stay exactly the same position where I started. Is this possible?  Is there an option or config to disable refit at the start of sketching?Thank you so much and have a nice day.

Hi, I would like to create an assembly containing a number of parts and make it so that at each regeneration I can enter a value to a parameter that changes the material of all parts for me.Example:I create parameter MAT that can have value 0 or 1 depending on whether I want aluminum or copper.Assembly A containing parts B-C-D having Aluminum as material so parameter MAT equals 0.I regenerate and set the parameter value to 1 getting parts B-C-D with material Copper .How can I do something like this?Are there other ways to do this kind of operation?I use Creo 11 with the AAX extension.

When I have a sheetmetal part, can Jlink then check if it is a flat part without bends or it is one with bends?

Hi,I would like to simulate the vibration pipe stress with frequency response (FRA).The source of vibration came from motor in compressor that we know frequency input that simulate from 20 Hz to 100 Hz   Load Set- Internal pipe pressure 3 bar- gravity load- torque from compressor The steps 1. Static analysis with pressure and gravity2. Prestress Modal analysis using the above static analysis for prestress.3. Run Frequency response dynamics analysis with torque varies on frequency. Are these steps correct? However, on FRA I don't know the amplitude. How can I find this amplitude?Also, There are 2 loading load functions and base excitation. My understanding this simulate should do the base excitation due to there are vibration from the base that pipe connected. Is this correct?  Also, the what is the value in base excitation and how can I find the amplitude. And in the calculate that relative to Ground and Supports. What are different of this 2?&nb

protoolkit: When ProPDFExport exports U3D PDF and opens it, it shows a 3D data parsing error

I don't want to see the warning "Cannot set system parameter for CopyGeom function". This is annoying and has no added value.How can I set this warning to no longer appear? Workaround: See CS418177, needs to be done every time when changes are made, What we use it for: We use skeletons with Publish Geometries, they are published to several sub skeletons and parts Which causes each time a lot of warnings when changes are made to the skeletonsImpact on us:We have to deliver our models clean and clear without warnings Each time we have to edit the External Copy Geometry when the warning appears So it is time consuming when you have a lot of models where this occur

I encountered a problem "The value must be a real number" when I try to plot a graph. Please help me figure out the problem. I use Mathcad Express Prime and I have attached the file. 

I am working on a project and would like to know if it is possible to access the images used when placing UDFs with the out-of-the-box UDF functionality. I want to place the UDF programmatically using named planes, axes, etc. However, if a plane, axis, or other feature is not found, I would like to show an image to help the user select the correct feature. Currently, I can place a UDF fully if all the named planes and features exist. I am looking for ways to handle situations where features are not found.

When using piping, you can select a material file in LineStock. When I select different materials, nothing happens to the pipe solids. When I change the Weight/Length, the weight of the pipe solids change.When I change piping_material_source to material_dir, again, nothing changes.Just want the pipes to get the right weight and appearance.Is this yet another Creo option that doesn't work or am I missing something?Using Creo 10

I'm creating a process plan (work instruction) of a design assembly.  In the design assembly there is an 'included' item that appears in the tree.  Seems the process plan module will not let me select this item for use in one of my assembly steps..  I can 'add' the identical assembly to the step but I'd really like to consume the one that already exists. I know the process plan module is a niche  and probably gets little use by most but any help appreciated. Creo 8.0.0.0

I am looking for a way to prevent the pop-up dialog box on start-up that shows Advanced_Assembly_SET feature not obtained. Trail file:!%CIWelcome to Creo Parametric 8.0.0.0.! warn_lic_dlg: warning! : Features Not Obtained:! : Advanced_Assembly_SET! : EXPERT-MACHINE_SET~ FocusIn `warn_lic_dlg` `ok`~ Activate `warn_lic_dlg` `ok` This causes the ptcdbatch program to "hang-up" when running task actions. CREO 8.0