Creo+ and Creo Parametric

Hello, I am working on drafting , I have to flip the direction of arrows outside , How to do this using ProToolkit API ? Regards,Kunal Bidkar 

I am using Creo Parametric Release 6.0 and Datecode6.0.3.0CREO 6.0.3.0 7R2114489 not displaying models, drawings, datums etc.Here are the errors that I facedNone.

It is a repetitive task for me to export Creo model files as an STL to the same general folder.  Would it be possible to reduce the time of doing this task by being able to specify a fixed end location for the STL exports?

I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.2.0Dear Sir,One of our system in design having CREO issues as described in below points. Please help us to resolve them asap.1. Creo dimension text in drawing unable to modified or overwrite.2. From window to window switching, we have to click several times to jump onto another window.3. Texture and alignment of text inside the format is not ok even after selecting the correct format used in another system.System No:- DW-1001-0017Plant location :- IMT ManesarPlant Name – UNO Minda Switch DivisionHere are the errors that I facedDear Sir,One of our system in design having CREO issues as described in below points. Please help us to resolve them asap.1. Creo dimension text in drawing unable to modified or overwrite.2. From window to window switching, we have to click several times to jump onto another window.3. Texture and alignment of text inside the format is not ok even after selecting the correct format us

I am very new to cabling and I'm in the process of creating my first flat harness drawing. Flattening the harness took a little time to figure out, but now that I'm creating the drawing I realize the flatten state is a bit of a mess and I'm probably not doing things the correct way. I have been unable to find tutorials or documentation to point me in the right direction, so I figured I would ask here. Below is a screen shot from my drawing showing what is possibly the worst location of my harness. I have two connectors that plug into a controller and two bundles that go in different directions (one large bundle, one small bundle). I realize that this is nearly impossible to put any dimensions on: What I would like to get to is something more like the image below where the two connectors split off and simple length dimension can be added. I know that I can change the cable from thick to centerline view, but I still have a mess of individual wires (which are driving my pin tabl

I try to create a simple dialog, which will be closed by pressing the Cancel-Button. The first time the dialog is started, everything works correct. uifcCreateDialog, uifcActivateDialog, uifcExitDialog and uifcDestroyDialog return 0 and no exception is thrown. But starting the dialog the second time fails. Calling uifcCreateDialog returns -1 and the dialog is not created. For some hints I would be grateful. Thanks in advance.   Versions: Creo Parametric 3.0 - 64 bit Windows 7 64 Bit C++ Object Toolkit

Hello,I am using Creo Pamaretric version 7.0 and I noticed that in Creo NC the toolpaths that the system generates can cause collisions. Even though the elements in the categories (Reference model, workpiece and fixture) are defined correctly, the default tool path created in Creo NC can cause collisions with a part or the environment. It is as if the system only takes into account the part to be machined and not the rest. Many CAM programs do not generate toolpaths if this could cause a collision. If this is the case, the calculation stops automatically and finds another solution.  Is there any function or option to optimize the toolpaths and avoid collisions? Thank you and best regards.

Subject: How to turn off hatching when converting dwg, dxf after creating a cross section in 2D drawing   Body: I am using Creo Parametric - Release 5.0 (connected) Release 5.0 and Datecode5.0.3.0 Hello. After creating a cross section with a 2D drawing, if there is a way to avoid hatching when converting dwg or dxf.Thank you.   Translated with Google Translate by Emily on May. 18th, 2022. --------------------------------------------------------------------------------------------------------------------- Subject:  2D 도면으로 횡단면 생성 후 dwg, dxf 변환 할 때 해칭 안나오게하는 방법 I am using Creo Parametric - Release 5.0 (connected) Release 5.0 and Datecode5.0.3.0안녕하세요.2D 도면으로 횡단면 생성 후dwg, dxf 변환 할 때 해칭 안나오게하는 방법이 있는지 확인부탁 드립니다.감사합니다.

We have been using Creo 3 with an intensive automation front end built in Excel 2003. It works flawlessly, and is very quick and efficient. The philosophy has been "if it ain't broke, don't fix it".  🙂It's time to move to a more modern Creo version, and I have version 8 up and running with no issues. The problem is, I can no longer communicate with Excel 2003 at all (using either the old Creo 3 pfclscom.exe, or the new one), and Excel 2016 is horrendously slow...both by itself, or when communicating with Creo 8. I really need a way to make Creo 8 talk to Excel 2003 (yes, I know it is older than a lot of the people reading this...but it is also much, much faster than newer versions of Excel in many ways).Seeing as how Excel 2016 uses the same old VB API, why can't Creo 8 continue to communicate with it?Does anybody know of any tricks to get around it, or is there a way that PTC could simply provide a backwards compatible API (pfclscom.exe file)?Thanks for any help.

We Have Netskope in our Environment.  When our users machines go to sleep they are not able to re-connect to the License is what it appears to look like. They must restart their services. this seems to be happening with the Team Center Integration piece I have an attached   

Hi all,I have struggled with this several times in the past. I have a feature where I would like the diameter to have limits of 5.257 / 5.250. I would like this to display as a 3 place decimal on the drawing. I can't seem to do this. I end up having to have a nominal feature of 5.2535 with a ±.0035 tolerance (switched to limit tolerance for display). I then get a display of 5.2570 / 5.2500. This has repeatedly caused questions internally and externally as it is the only dimension displayed to 4 decimal places. If I change to 3 place decimal display, the dimension changes to 5.258 / 5.250. This is really frustrating me and I'm sure that I'm not the first to run into this problem.Any help is greatly appreciated.Greg

I am using Creo Parametric Release 7.0 and Datecode7.0.3.0Dear,Is there an option to automatically "Erase Not Displayed" when a window (model or drawing...) is closed?Best regards

Why don't the instances of the assembly show up in the BOM?

Hello, I have a problem when launching an analysis of a rack. The software throws the following error "The model is insufficiently constrained for the analysis. Please review the element connections,properties, and constraints in highlighted entities. If this is a modal analysis, then you may be able to obtain a solution by requesting additional modes."I have been trying to solve this error for a month and it has not been possible, I have already tried to solve it by means of welding contacts and interfaces, applying certain properties in the materials and I cannot solve it, I hope someone can help me, I attach the image with the errors.

How do you create a component interface to Geometry feature that allow for automatic assembly (autoplace) of a component to an assembly based on a named coordinate system. We figured out how to do similar using the Interface to Interface capabilities, however that requires defining an interface in EVERY receiving assembly. We would like to do this WITHOUT adding an interface feature in every assembly.E.g. Align a nut to an assembly purely based off a named coordinate system using query rules defined in the component interface?We are using Creo4, however will be moving to Creo7 soon.

I am using Creo Parametric - Release 5.0 (connected) Release 5.0 and Datecode5.0.6.0it often happens that the program crashes when starting the program or when processing 2D files.

■Q2:How to get these three red isolines from green surfaces?The command under the"Style/curve from surface" only can extract isoline from a single surface, just a partial segment. Even if I extract isolines face by face, the joints of partial segments must be out of alignment 

Hello members, how can I give dimension from Circle boundary to point? Its snapping to circle center point. See attached image. Thanks.

I made a list of the questions that most puzzled me, I would be grateful if anyone could help me with any of the following questions, Thanks############################################■Q1: How to scale each body or surface individually? The "operations/scale model" command will scale the entire part (all body). The "Flexible modeling/Move feature" command only can move and rotate. ############################################■Q2:How to get these three red isolines from green surfaces?The command under the"Style/curve from surface" only can extract isoline from a single surface, just a partial segment. Even if I extract isolines face by face, the joints of partial segments must be out of alignment ############################################■Q3:XZ plane is my sketch plane, How to get the“perpendicular projection point” G of point K ? I can't do that by the snap tool or project tool. (the "S" shape curve is drawn in the ZY sketch plane ) #####################

Dear Sirs,I am using Creo Parametric Release 9.0 and Datecode9.0.0.0I'm getting error "IFX failed to load" followed by "AFX failed to load" when launching Creo Parametric. I found on the online support the article CS332967 and tried to resolve the issue by turning off both extensions with config.pro options, but it did not work.Can you please give me more detailed instructions to turn off these extensions by editing the correct config.pro file? Specifically, which config.pro file should I edit since there are multiple files in the Creo 9 directory?Thank you in advance, best regards.Here are the errors that I facedIFX failed to loadAFX failed to load

■Q7:Under sketch mode, How to turn on the "extension-snap" of LINE_F to make the POINT_K pass through or make it align the extension?  

Hi guys,   I have the problem that many users do only get a blank page at Attributes page when starting a promotion Request. Starting the request in standalone Browser everything is working fine. Even when pressing F5 the screen renews and everything is fine.   config.pro option browser_limit_to_ie9 is set to no Java ist 1.8.0.91   even with original config.pro of installation I got same behaviour...   Windchill: 11.0 M030 CPS03 PS1 Creo Parametric 2.0 M240

■Q1: How to scale each body or surface individually? The "operations/scale model" command will scale the entire part (all body). The "Flexible modeling/Move feature" command only can move and rotate.

■Q6:How to draw a freehand curve fitting the surface of the model?The command under the"Style/curve/COS" only can draw on a single surface, it can not across adjacent surfaces.  

 Multiple display issues under the "perspective mode", Are these some kind of well-intentioned functional design? The visibility of the sketch is completely random depending on the point of view.   I know the only way to avoid these is to turn off the "perspective mode". But what confuses me is why?  Example 1: round corner disappearedExample 2: a simple circle disappearedif there is no center mark or filled color, you can not see the sketch at all, just like the "round corner" example aboveExample 3:In fact, it's much more than that, if you use the "delete segment" tool under the "perspective mode", it will cut the segment When your mouse doesn't actually touch or hover over that line segment. It's like they told you that every building within 1 km of the factory will be demolished, yet your house is 1.5 km away and it's still being demolished