Creo+ and Creo Parametric

I am using Creo 9.I have received a large step file with over 1k components, I have imported it successfully and now I need to rename some of the files. I tried to use "Use template" option - no matter what I choose to do - the generation of file names would wipe out all of the values in the "New File Name" column (see screenshot attached). I tried  asterisk symbol in front, at the end, or both in front and after the characters i need to replace; i also tried using suffixes and not using suffixes for the new file name. I also tried File > Save, edit file list in excel, and then import it back, but it doesn't apply the renaming when importing.I see most of the problems with file names being too long, but I can't remove sections of file names using template. For example, i need to replace "STEEL" in the names of the files with "S" in 200 files, but no matter what I do I can't make it work. If i use "Template" then it wipes out all names, or if I Export the file nam

I am using Creo Simulate Release N/A and DatecodeN/ADie Modalanalyse ergab 58 Eigenmoden. Danach möchte ich eine dynamische Analyse im Zeitbereich machen (um die Erregerkräfte in die Struktur einspielen zu können). Wie gewohnt natürlich im Reiter "Vorherige Analyse" die besagte Modalanalyse gewählt. Weiters möchte ich die Dämpfungskoeffizienten für jeden Eigenmode individuell eingeben ... also dementsprechend eingestellt ... und ich hätte erwartet, dass ich nun 58 Eingabemöglichkeiten bekomme. Leider wurden mir nur 4 Eingabemöglichkeiten (für die ersten 4 Eigenmoden) angeboten.Woran könnte dies liegen?Habe derartige Berechnungen schon öfter gemacht und konnte bis jetzt auch die Dämpfungskoeffizienten immer individuell einstellen.Danke schön für Hilfe.SG Markus Plainer

I am making a spline in a part based on a large collection of points I am creating from a file.  When I assemble this part into an assembly I want to know the location of these points relative to the assembly coordinate system.  Is there a way for me to measure the x,y,z distance from the assembly coordinate system to those points all at once instead of having to do hundreds of individual measure commands?  Creo Parametric 8.0.5.0

Creo Parametric 10.0.5.0 I am trying to create a plug weld. I have had success with several on one side of the weldment, but when I try to create the plug welds on the opposite side the weld seems to project to the opposite side. I have tried using the opposite surface of the red surface, but it just projects to the opposite side of the weldment.  

to whom it may concern... Hi there, I recently installed Creo Parametric 10.0.8.0.As it turned out, the debug console, you can activate by adding "set CEF_DEBUG_PORT=9222" to your start command is broken in the latest release of Creo 10. Usually, You get debug information displayed, when You open "http://localhost:9222/" on the computer running Creo Parametric.In 10.0.8.0 that address just shows a blank page (NO "This site can’t be reached" error !).In 10.0.7.0 everything works as intended. I tested this on several machines. Also tried to install both versions parallel. But to get the console working again, I had to uninstall Creo completely and reinstall 10.0.7.0 again. 

Hi all,I want to information on the layer hidden item. Why some items are in this layers and why when i move this items to the others layers like show item layer and i save the layers state,I see the item correctly on the view of drawing but if i save the modifications when i close the draw model et i open this after, this modifications are not save.I add screen shot toexplain my requestSteo 01Step 02 Step 03

Customizing the pop up/hover display of creo parametric model names in the graphics window to include an additional parameter such as Title or PTC_COMMON_NAMEIs this just straight up an enhancement or is there a current customization method freely available?For example.    In my screenshot it shows:    SYNTAX -->ITEM:F#(FEAT TYPE):FILENAMEOn Screen --> Edge:F5(IMPORT FEATURE):601301I want to show the same plus an additional Parameter to the right of FILENAME such as PTC_COMMON_NAME as in my mockup (Green Box) below.

I am having an issue with printing Creo drawings. Every time I print a drawing, the print comes out with a very thick outline. I am attaching pictures to better explain my issue. The left picture shows a drawing view, and the right picture shows the print view. I recently switched from SolidWorks to Creo and never had this issue with SolidWorks, so I don't know how to fix these outlines. Any help would be greatly appreciated.drawing viewprint view 

I am using Creo Parametric Release 11.0 and Datecode11.0.3.0Is it possible to factor in gravity in cabling design to get a more realistic representation of slack and mass effect? I haven't found any related article or post in the community.

As a disabled user with only one hand, I need a way to setup Creo Parametric to only use Mouse buttons for PAN. This is the only function that I cannot seem to find a work around from Shift + RMB to PAN in my model. Yes, I can use the Pan icon and have been doing that, but it is extra clicks and impacts productivity. Other CREO PTC applciations have the ability to modify and control the Pan/Zoom/Rotate features (Creo View, Creo Elements etc), Creo Parametric does not have this ability for those of us that need accomidations due to physical disability and limitations. When will this be fixed for the user community?

Hello, Looking for the information to import the wirelist from Capital(Mentor Graphics). i am trying to use wire information from capital harness and creating 3d cad in creo. I have downloaded the xml from creo but when importing the xml getting below error message.  these are the file extension i exported from mentor graphics. 

I am using Creo Parametric Release 8.0 and Datecode8.0.3.0I want to be able to snap a new line in sketch mode to a custom palette symbol without have to break the symbol into draft entities.

I am using Creo Parametric 5.0 5.0.6.0How to configure installation so run Node Locked license before running Floating Server License? A user has a Node Locked license, but also needs access to Floating Server license pool.When user runs Creo, floating license is pulled first. The goal is to pull Node Locked license first.

I have a customised table for fetching all parts all parts from model tree . But the error in the table is it does not display alphabetically / in order of the model tree. E.G:- it goes like 001,003,002. but I need it configured as in order. Can anyone help. Attached is the file.Thanks in advance

Hi, Do we have an option to create an animation for Hose/Flexible pipe in Creo? Appreciate for your response. ThanksNaresh 

Hello,I have a network folder where the icon is in the path F:\Config\Creo\Splash\Icone.ico , when I go to put an image on the CREO icon on the desktop it doesn't appear, the folder has all the permissions because CREO is saved normally, but the image doesn't appear, what could it be?

I know it's a weird Q. I thought worth still asking. Options to build cable, like something as shown in image attached. THANKS!

Consider that I have an assembly model with me which is designed in a different CAD software (Eg.: SW, NX...)Now, I have imported that geometry into CREO environment. Now, I`d like to find out the mass properties, Centre of Gravity & Inertia of the same imported assembly. This is where the question comes in... Now, if I don`t define the material properties, is there any way to find out the above mentioned parameters??? Because I have heard that SW has this feature & I`m curious if CREO works this way or not.Please feel free to answer. I`d humbly appreciate your replies. CiaoSrikar Sarma

I am using Creo Parametric Release 11.0 and Datecode11.0.2.0I've built a PRO/Toolkit project in exe (SPAWN) mode. While registering it, I'm getting the following error.Here are the errors that I faced"Foreign program did not initialize properly; a communication problem may have occurred."

Hello team, in one of our use case, we need to show multiple WTPart's details in a drawing as a table format. there could be 100 WTParts with ~15 attributes each. so the data will be sppaned across multiple sheets. as of now design engineer has to manually create table and fill in all the data and we want to automate the process. Solution:fetch the data from windchill using queryspec and populate the as "Parameters" of the drawingcreate a "Table Template" as file with '&variables' as key and add same Key values in 'Parameter' table.user then will select the table template from 'Table From File' option and place it on drawing, the drawing will automatically fill out the variable values from 'Parameter' section. downside too many parameters are getting generated as of now. if drawing has 20 related WTParts with 20 values to be shown the 20 x 20 = 400 key values pairs will get generated. but it saves a lot of manual data filling.we have to create a table templ

Greetings, Regarding the Creo AFX start_mdl.cfg file (start part information), is there a way to: Specify tolerancing standard  (ANSI/ASME or ISO/DIN)?Specify separate Part and Assembly parameters (our start part and start assembly parameters are slightly different)? We are currently using Creo 11.0.3.0. Thank you, Matt Steed

I am not able to find the enclosure volume. option not highlighted.     

Hi all, I would like to know if someone can help me to give an direction what's the best path for me in Creo. Not fully new in 3d, was CAM programmer for over 10 years. (other program than Creo)Switched now to Additive Manufacturing, and would like to help the engineers with some questions. Only thing is i cannot design in creo yet. (did some playlists in the PTC learner, but that doesn't make me an engineer.)I would like to learn how to use the Topological designing and design for additive manufacturing. But i don't know what path is the best to walk. I cannot find the requirements if you want to follow the training : Generative Topology Optimization.I understand that the fundamentals would be helpful, but what kind of training is advice before starting with topology? Thank you,Kind regards, Danny

Hi allI'm using inheritance .prt to .prt model links.I'm getting 3 different icons shown in the model tree.  andCan someone explain the different meanings of these 3 variants?I already checked the information in Model Tree Icon List - PTC Community Thanks a lot in advancePius We are using Creo Paramterics 8.0.4.0, 

Hello,We are experiencing difficulties opening drawings directly from the model . Currently, our designers have to manually go to the server information(Windchill), navigate to the content tab, find the drawing reference, and only then open the drawing.Is there a way to use Creo JS to programmatically find the drawing reference associated with the current model in Windchill, and then automatically download and open it?Any advice or example scripts would be greatly appreciated!