Creo Elements Direct

Hello all, I'm trying to measure an angle between a edge of my object and the line that makes up the envelope.  Does anyone know how to do that? 

Is it possible to activate the "Advanced Assembly" module in 3D Access in order to play animations? I don't want to change or manipulate animations or relation sets, just play animations. ThanksCreo Elements/Direct 3D Access 20.3

Dear Community Is it possible the export subassemblies from a top assembly as PVZ files, with the coordinate system from the top assembly? The goal is to use these PVZ files to reassemble the top assembly in an Vuforia Studio Experience and not have to reposition them. We are using the newest version of Creo Elements/Direct Modeling Thanks for your help! Alex

Creo Elements Direct Express won't open. Get the One Time Activation dialogue box then the proxy server dialogue box, then the request license dialogue box. Get the 72 hour activation code and enter it and it says it is invalid.  Anyone else having this issue??   Thanks,       

Hi everyone,I wanted to find a course or video playlist or pdf document about Creo Elements/Direct Drafting (Mixed UI). I'm a newbie and want to self-study Creo Elements/Direct Drafting with Mixed UI interface.Please share me if you have relative document. Thanks advanced!

I would like to request the version 20.3.4.0 of Creo Elements/Direct Modeling. Please provide me with the necessary download links and installation instructions.Thank you for your prompt assistance.

CS130292 : what is exactly the difference between -restart 0 and 2 ?

Hello,my new laptop doesn't have an ethernet plug with its own Physical address, and depending on where I work I plug it into different docking stations which have an ethernet plug and their own physical address.I have a nodelock license, so which Host ID should I enter into the licensing page?Right now I'm at the office plugged into a docking station, and cmd-ipconfig shows my host id is 30-13-8B-EF-C2-A9.When I start the Creo installer it shows the same host id. So I get a license file for this host id, load the file in the License window, and I get a Not suitable error.I contacted PTC licensing support and the seem to be clueless on this issue, any ideas or possible solutions?Thank you!Guido 

Until now, as shown in the attached video it is possible to share several parts or assemblies from different owner in one owner only but not for in their owner...

Dear Creo-Team/Community,I'm currently trying to open Creo after some months. Creo asks for an activation key, which I've tried to created manually on the redirected creo.com website. Sadly it isn't working anymore. Can anyone please help?  

Hello Community!Can you help me? Which extensions does Elements/Direct Modeling Express read?

I use Creo Elements/Direct Drafting (Mixed UI). I want to turn on Part brower as the below picture to manage layout. Please guide me how to turn it. I appreciate your prompt response.

I just upgraded to 20.6.0.0.0.  Every time I load from Model Manager or from a local drive, Modeling does a part check.   I have assemblies with thousands of parts and this really takes a long time.  Is there a way of turning off the part check at load?   This is really not necessary since I create and saved the files and know they are good.  I manually run part checks when I think they are required.   Tom  

Hi guys, hope you all are doing well . Need guidance. Whenever I enter text in creo .sec file, the triangle border appears and I cannot remove it. And it shows even if I export that file into another format. Please guide me how to remove it. I am using creo 10.

Option CENTER_LINE is default when I dim circular in CED Drafting 20.7. Please guide me how to set up option NO_CENTER_LINE is default.    

To get the a part volume, in LISP we can use the function(sd-call-cmds(get_vol_prop ...Is there a way to have the total surface area of a part? I am using PTC Creo Direct Modellin v20.5.

Can somebody at PTC please have the common decency to advise us on the intentions of the License Server for Modeling Express 8. Either that ore release the product from this requirement.   Regards (but not expecting a reply from anyone in the know)    

Dear Team,When I am trying to install Creo Element direct modelling 20.7, I got this error. I know this is specific to Windows, but somehow I am not able to fix this, please help me. OS- Windows 11 HomeProcessor - AMD Ryzen 5 Note- In Windows 10 it works perfectly fine. 

How can I load a sketch via command line that is placed as a child of the frame?In my case I would like the "logo" sketch to be placed as a child of the "cart_A3" framethe command line command to load the sketch is:sd-am-load-sketch  I' have Creo Elements/Direct Modeling 20.5.1.0

Then I have assemblies with mechanism constrains, Creo wants to check out the components then I drag it.Are there any config options to set, or any things to do. So the components didn't get an update in the workspace?

Im working in teh Creo Elements/Direct 20.2.1.0 For example if a i have 50 threaded M6 holes and i want to change  all of them at the same time to partially threaded blind hole is it possible?  Thanks in advance

Good Morning, I have some difficulty with the English language. My company recently purchased a Creo 10 license. I was wondering if it is possible, and I hope so, to be able to convert parts of surfaces into a solid part by knowing the thickness. Thank you

Greetings! Is there a module/macro/expansion for Creo Elements Direct Modeling similar to the Toolbox in Solidworks? Currently, when I want to grab a fastener. I have to go to a webpage built by our organisation. Download a .sdexp file and drag that into Creo. And Creo loads it from the database. This works fine. But I'd much rather have an interface within Creo itself that has this functionality.  My previous post was about customising my toolbar. And since then I've familiarized myself a bit more with the LISP programming language and the Syntax used by Creo. I am not a programmer by any stretch of the imagination, but i do have some basic knowledge. So if there is no such module available. I would like to try my own hand at developing such an interface. Both to make something useful and to learn to program such a tool.  I downloaded a Pipe Measure Tool from the  http://osd.cad.de/ website. But I was not happy with how it functio

Hi - I'm a very fresh newbie so hopefully an easy question... I have generated some 2D geometry and want to export it to IGES (or STEP).When I go to File/Save I do not see the IGES or STEP option under file type - any ideas? An associated issue perhaps - the 2D geometry sits on the active workplane do these need to belong to a Part for export, and if so how? I'm using Direct Modelling Express 8.0 thanks

I have a file that has a long tree of features. One of the early features has a sketch geometry extrude. It has a pattern of three spots. I want to undo one of the three areas and select another pattern. How is this done? Right clicking on the feature or the sketch doesn't give me any options.