Mathcad

I purchased product code but I am unable to locate it

Dear all I try to find A that A is function that have Node and Member_Node as variable as Pic&File attachment. Thank you

I am very new to Mathcad and am struggling to evaluate a formula. All help is appreciated.   The formula as written is:   =(1+0.5*sin 1.5 *77.1)   Where 1.5 is an exponent of sine.  

Anyone know how to get the coefficients out of the Bicubic2D function?  Or if you have a program that does the equivalent that would work for me.  I find myself needing to port the fit into excel and am finding I don't know how to do that. A 4.0 example attached but any example will work. Thanks,

Hi, I am trying to replicate a programming block that my professor sent me to implement into a larger mathcad sheet/program. However, I'm getting a bit lost on the formatting of it. The screencap of the correct block is shown below. And then there's my attempt at it so far. I'm mostly confused about the value the if statement falls back on to if the following statements fail. Any help would be appreciated! I'm used to just using MathCad for "cheat" sheet style calculations, so I'm lost on the programming logic of the language.

I do not know what I do wrong in sample. I can't plot graphs.

Dear allI try to prepare the matrices in order automatically as pic and attachment file, help me pleasethank you

I am using Mathcad 15.0 M050I started getting an Out of memory error popup window, coming at random times when my MatchCAD file is open but not even running.I added memory to my computer to increase its memory several times.This did not reduce the occurrance of the Out of memory error at all.Here are the errors that I faced Out of memory

Sehr geehrte Damen und Herren,leider gibt es ein schwerwiegendes Problem mit der Konvertierung bei Mathcad Prime 6.0.0.0.Es erscheint folgende Meldung:Zum Ausführen des Konvertierers wird Mathcad 15 M010 oder höher benöigt. Installieren Sie die neueste Version von Mathcad 15, und starten Sie den Konvertierer neu.Mathcad Prime 6.0.0.0 ist doch bereits höher als Mathcad 15, richtig?Was muss unternommen werden, damit die Konvertierung funktioniert?Vielen Dank für Ihre Unterstützung.MfGBernhard Waldherr

Dear allI try to extract matrices by Column and Raw Input as pic attachment.please help methank you.

Trying to get Mathcad 15.0 installed. I talked to a representative and started the process of a free trial but for some reason the download stalls at 50% and the number in the progress bar turns from black at 25% to red at 50%. I tried waiting but after an hour I assumed something was wrong. There is a previous version of Mathcad 15.0 installed on laptop being used

I have to activate my license every time i open Mathcad. How can I apply my activation so that this is not necessary.

I have tried to install my copy of Mathcad 11 on a new computer (Windows 10 64-bit) as the old one is no longer viable. I have had no luck. I can't even get to a screen where I can enter the KEY and start the activation process.  I have the original CD and the product KEY. This is what I get when I launch "setup"    Any help would be great appreciated. BTW I do have Prime 6.0 and Mathcad 15 installed on the new PC.

is there a way you can make solve not make the symbolic answer and go directly to the numeral solution. when i turn in rapports is seems unnecessary to include it. i linked an example. just to be clear i want the big unusable chunk in the middle out.  

Hi All,Is there an easier way to convert a range variable into a vector? That is, suppose we have a list of data (perhaps huge) in a single table over a range. Infact, this range variable is the output of a part of programming in mathcad. How to convert this in to a vector? Once I can convert this into a vector, then I can easily locate roots using curve "fitting".

I have a manual flexlm install with one instance of lmgrd listening on port 27000. Multiple vendor daemons are successfully running under that. I'd like to add the new vendor daemon ptd_d into the mix but I'm getting "status 25 Invalid Host" errors when the license file is read.   17:03:36 (lmgrd) REstarted ptc_d17:03:36 (lmgrd) Done rereading17:03:36 (lmgrd) ...Finished rereading17:03:41 (lmgrd) ptc_d exited with status 25 (Invalid host)   My PTC license file looks like this:   SERVER myhostname PTC_HOSTID=XX-XX-XX-XX-XX-XX 27000DAEMON ptc_d "c:\flexlm\ptc_d.exe" 7788   The host machine has two NICs installed. The PTC license file is keyed to the first/main/active NIC.   lmgrd 11.16.2 ptc_d 11.14.1.2 (also tried 11.16.1.2, no change) Windows 10 64 bit   I've tried various permutations of putting things in quotes, using opt files, etc. I even regenerated the license file to use the other NIC/MAC address, no change. Still getting Invalid Host 25 errors. &nb

When one goes to install Mathcad (ver Prime 3.1), the program asks for the product code.  I have looked at all the info I have from PTC (fulfillment letter, hard copy of software, etc) but I do not see it.   Can anyone advise where I would find the product code?   thanks   m8ike

Years ago Werner helped me in setting up a technique to define the first deflection in a curve. Now I have to make a similar analysis but unfortunately the worksheet miscalculates the first deflection in 5 out of 6 plots. I was wondering whether this could be optimized? I have tried a few approaches e.g. using a higher derivative but this only marginally improved my results. I have put the correct indexes in the worksheet as correct 1 etc. Any help or suggestion to improve the method would be extremely appreciated as I have to analyse 150 plots and would like to avoid doing this manually. Thank you in advance!

I can't use the start the 30 day free full version of mathcad. I downloaded the file with the licence but nothing else happened (after opening mathcad it looks like the old poor version). What should i do next?

Okay, here's the challenge:  measure the flow rate of a stream.  Build a weir with a V-notch as shown below, measure the water depth as shown. What is the flow rate (liters/min) for a given height H?  A derivation and formula, please!  

Hello!The versions M045 and M050 on Windows 10 do not work.M045 on startup gives the error of "Failed To Create Empty Document".M050 just hangs and does not open any file.The system is Windows 10.Help me to understand.

I am currently a student who purchased Mathcad Prime 5.0 student edition in January 2020 and I currently have until the 28th of January of 2021 to use it. I recently got a new computer and I wanted to redownload it again, but when I tried to do that it told me I had no products to update, and I am not sure why. I have tried everything, and the phone support couldn't help me. So if someone could help me solve this issue it would be appreciated.

Cannot activate license. I saved the license file on my desktop and pointed to it's location, but get the error:(-103) Cannot checkout an uncounted license within a Windows Terminal Services guest session.

Kindly Note : Effective January 1, 2022, the only version of PTC Mathcad available for subscription will be PTC Mathcad Prime 7 and future versions of PTC Mathcad Prime. After December 31, 2021, PTC will no longer have the right to sell or distribute software versions moving to end of sale due to a third-party component contained in those versions. For more details, refer note from Mathcad Product Manager.Moving forward, the below mentioned links for Mathcad Downloadable for Version 11, 12, 13, 14, 15 & Prime 4.0 will be routed to latest release of Mathcad Prime.************************************************************************************************************************************************************************ Refer download url  https://support.ptc.com/support/mathcad_downloads.htm Once you refer the above link - Select the release which is to be downloaded. For example, I have selected Mathcad 14.0 release for download -Click on the #Release of Ma

First lets understand what is a Floating License & what is a Node Locked License: Floating License  Open the license file in a text editor Floating license file contains server and daemon information as SERVER __HOSTNAME__ PTC_HOSTID=<SERVER_HOST_ID> 7788 DAEMON ptc_d __PTCD_PATH__ Additional details -  A floating license refers to a licensing scheme where the permission to execute the PTC product is controlled by the FlexNet server (the PTC license server) In the FlexNet server environment any machine configured as a client will be allowed to use floating licenses until the number of licenses purchased has been exhausted The installation of a floating license(s) requires an authorization string, which is specific to the number of licenses (seats) purchased, the expiration date and the PTC_HOSTID for the machine to run the FLEXnet server program For example refer below image: Node-Lock license File contains only machine specific HOST ID(alphanumeric number i