PLM

Hi avillanueva, Hi took Affected Objects from getChangeablesBefore(); but now I am facing an issue to get On Order, Disposition comment Work in progress and Finished. To take get these values I am using AffectedActivityData affectedActivityData = (AffectedActivityData) Object; but its not working. Please help .  

Version: Windchill 12.0 Use Case: In my organization we have characters that we cannot use in the part number (not auto-generated). The list is way shorter then what the legal list is. We would like to constrain the attribute Number with an illegal value list.Description: Is there some way to revert the Legal value list to an illegal value list? How can we constrain the attribute in the most easy way? 

Version: Windchill 12.0 Use Case: Using Windchill 12.0.2.7. and undergoing a rehost procedure from a source to a target instance. The source is not clustered and the target is clustered.Description: File vaults will not validate when set to the proper UNC path instead are defaulting to the local vault instance. I am under the impression that vault configuration data may be stored in the database and may have been wiped, potentially looking at how to restore the proper settings. Looking for any documentation on the procedure to follow in this environment configuration. Thank you.

Version: Windchill 12.1 Use Case: Fetch all the Family Table data corresponding to a given Generic/Instance CAD part.Description: We want an Windchill API to fetch the cell values of a FamilyTable/FamilyTree corresponding to instance/generic CAD document.

I am using Windchill PDMLink Release 10.2 and Datecode with CPS M030-CPS11hello.We are currently troubleshooting an issue with WinDU operation for upgrades.A first party issue occurs in the CabinetBased Data Container Alignment Report in System Health Check during WinDU operation.To fix this, I run Fix CabinetBased Data Container Alignment in Winru, but it only partially fixes it.Here are the errors that I faced CabinetBasedDataContainerAlignmentRT.log   Object in container Kis_Lib:38971109 Cabinet in container Kis_Project:82100010 Subfolder of object is in container Kis_Project while object is in container Kis_Lib:38971109.There is not enough information to fix. Further investigation is needed. 

I am using Windchill ProjectLink Release 11.1 and Datecode with CPS M020-CPS27We are unable to get any Windchill users (other than those with administrator privileges) setup with the ability to share any objects from PDM to ProjectLink ("Share to Project"). We are seeking to learn the access controls required, and the level in which the access controls need to be set at.The objects we are trying to share are CAD objects (Creo files), and the users are Team Members to the Projects and have already Joined the projects.The error message we receive states:FAILURE: Ineligible objects selected. The object(s) you selected is ineligible for Add to Project, or you do not have access to the object(s).Here are the errors that I facedFAILURE: Ineligible objects selected. The object(s) you selected is ineligible for Add to Project, or you do not have access to the object(s).

Use case: I have a Part Structure. I want to add all the Parts and associated EPMDocuments available in the structure, Add the structure into the workspace and then do check out all the EPMDocuments from the workspace. What i did :private void checkoutDocument(EPMDocument document) throws WTException, WTPropertyVetoException {try {System.out.println("Checking out document: " + document.getNumber());if (!WorkInProgressHelper.isCheckedOut(document)) {// Get the current user's checkout folderFolder checkoutFolder = WorkInProgressHelper.service.getCheckoutFolder();// CheckoutLink chilink = WorkInProgressHelper.service.checkout(document, checkoutFolder, "Check out comment");CheckoutLink chilink = WorkInProgressHelper.service.checkout(document, checkoutFolder, WorkspaceName)wt.epm.EPMDocument wrk = (wt.epm.EPMDocument)chilink.getWorkingCopy();System.out.println("Document checked out successfully: " + wrk.getIdentity());} else {System.out.println("Document is already checked out.");}} ca

Hello, Besides assigning yourself as one of the Reviewers and waiting until everyone else has signed off on a PR, is there a way to "self-demote" a PR? For example, you push it through and then realize you made a mistake on a drawing. In our current workflow, we have to ask one of the reviewers to mark their task as rework. Is there a way to do this yourself? Thanks!

It's been a few years since I had to do look into this.We have a Change Notice that is a Workflow at the Org level. The OIR calls out the lifecycle and Team Template.The team template has no uses or groups in the roles (it's at the Org level).What is happening is that all the Roles in the workflow at the Product context level are being populated with everyone in that same role in the product context team.I created a new OIR at the Product context and it calls for a new Team Template with just a few people in the roles but it still populated everyone from the Product context team?If I reset the team it does the same thing - everyone.What am I missing here? Thanks.

I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.1.111. After running the revaulting process, there were still entries left in the database. Re-running revaulting, however, does nothing to the remaining entries.2. The cache vault directory contains 11 000 items, and neither scheduled synchronization nor forced synchronization reduces this number.

Version: Windchill 12.1 Use Case: Creating family table instance for existing solidworks generic sldprt. existing Generic have revision B.1, Family table created with Revision A.1Description: Hi Community,want to maintain the Revision for Generic and Family table instances with same revision,Here one of user take generic Cad part of solidworks which existed in C.1 version and user created family table instance for that CAD Part and checked in new family table was created as A.1 version.this there is mismatch of parent generic CAD and Family table instance here. So we wanted to maintain same version of generic CAD part in family table instance CAD part.Is it possible in Windchill? this need any customization? or any preference management OOTB options available?please help.

Hi Guys,Can we use the loader to create an attribute name that we can add to the selected WT part? Regards,AJ 

Hi All, I'm tyring to catch event when windchill user login into system so I have used below API its not trriggered in WC-12.1 versionSessionUserAuditEvent.LOGINany new API's available? Thanks,VR

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.1.0We are working to get the Windchill Asstored BOM From Data Base or API But we are not able to Achieve the information, From the database Asstored BOM We able to get but Child Revision information not available. Please guide us to get the Required Information.

Good evening,I'm having trouble understanding the process of updating an IBA of an EPMDocument.I'm trying as it follows:attributes.put(attributeName, attributeValue);PersistableAdapter epmObj = new PersistableAdapter(epmDoc, null, null, new UpdateOperationIdentifier());epmObj.load(attributeName);epmObj.set(attributeName, attributeValue);EPMDocument obj = (EPMDocument) epmObj.apply();PersistenceHelper.manager.modify(obj); However I didn't get any changes on the attribute itself. I'm guessing that in this case I need to checkout the EPM and do the changes on a working copy of it to persist the changes.However reading the documentation and other topics I haven't found a clear flow to check-out--> set the attribute and then check-in the object. Can someone give me a hand on this if possible? Thank you kindly for your support

I'm working on enhancing our PDM web services in Windchill to allow updating the "Exemple" attribute of Customer Items.Specifically, we need to create a new web service method that can update this attribute for Customer Items in the "Created" state. The service should support both full and partial updates of the "Exemple" attribute.Does anyone have a solution for this,Thanks

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.2.0I have created two webjects one is Search-Objects and another is custom webject. I'm passing the object id to the custom webject as input and I am getting the actual value as a output. But the issue is, in the output result only for the last object the custom value is showing not for others.

Hi Everyone, We have requirement that if someone select the REWORK voting then we have customised drop-down where we get the option to select resulting items for REWOK and it creates the new REWORK task so what happened when we create the  New REWORK task with same affected and resulting item That time in Change Summary we get duplicate objects so do we have any way how we can avoid duplication in Change Summary 

Hi All,Trying pass the attribute value on EPM Doc which comes from CAD file on a WTPart.First : Is it possible to pass attribute value from EPM to WTPart without customization.Second : Tried for Alias attribute, however the mapping goes from WTPart to EPM Doc. Any references would be of great help. Regards.

Version: Windchill 12.0 Use Case: People are downloading document from Windchill and they keep them in their local computer instead of downloading them again each time. this leads to error in document version?Description: we'd like to add an expiry date to documents downloaded from Windchill, making them unusable after a certain period of time.For example, if a production technician downloads a work instruction from Windchill, it would be unusable 24 hours after downloading.Is this possible in Windchill? thanks in advance

I am using Windchill PDMLink Release 11.1 and Datecode with CPS F000重新安排存储后，重新安排存储的历史记录里的条目数已经不再增加，但是显示正在执行，已经持续一周时间。1.希望知道重新安排存储的功能的执行逻辑。2.想咨询此种情况下是否可以重启服务器。   Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- After rescheduling storage, the number of entries in the history of rescheduling storage no longer increases, but it is displayed as being executed and has lasted for a week.1. I would like to know the execution logic of the function of rescheduling storage.2. I would like to ask whether the server can be restarted in this case.

Hi @Chris17 and other members, I am still getting the below error after following the steps. (Internal name is Mass in Windchill, Mapping is MSP:Mass, Solidworks parameter name is Mass).   Incoming attribute(s) Mass ignored as they are not part of type definition for the soft type "WCTYPE|wt.epm.EPMDocument|com.gates.DefaultEPMDocument".Do we need to restart or clear cache? Appreciate your help in this regard.  

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.0Hi all,I'm trying to create a button viewable after right clicking an object within the file browser. I'm not sure which model I need to edit in order to achieve this. I'd also like this button to interact with the API using the object OID to download the file, and after making changes with the file reupload the file in its place. is this possible?My main issues are I'm not sure what model I need to customize to achieve this and after I create the button in the model, I'm not sure how I can correctly hook my custom class to the button to do the Api interactions and the edits I need .

When opening a details TAB in the Windchill browser of Creo no visualization is displayed.Instead of that the following message is displayed:Install Creo View ClientStop Checking for new versionsBut nothing happens when selecting one of these.How can I solve this?I am using the chromium browser.regards,bert

Version: Windchill 11.1 Use Case: Application server required to be replaced. Hence, planning for rehost to a new server machine, indenting to use same data base.Description: Can we use existing data base [Reuse data base] for the rehosting? or data base need to be duplicated for the rehosting?What are the risks involved to reuse existing data base for rehosting Windchill to a new environment, if any?What is the best practice to achieve this use case?