System Administration

As per the original post.    Does anyone know if there is a "wildcard" symbol that can be used for a mapkey?  I'm trying to create a mapkey that starts a new drawing.  It pauses for the name input, then selects the correct drawing template.  What I can't seem to get it to do is always select the highest level assembly as the default model for the drawing.  All of our highest level assemblies have a "-501" at the end of the name, with a different identifying number proceeding that.  Is there a way to make it just find the file with "-501.asm" in the name?  Coincidentally, this identifying number is also the name of the drawing - can that information be used since it is added prior to the assembly search?

I am using Creo Parametric Release 9.0 and Datecode9.0.0.0how to check the mass propertiesHere are the errors that I facedno

Using Creo 7.0.5.0. As Creo use this Session type of environment and never warns you about closing a single file due to unsaved changes I'm more or less saving all the time (afraid of loosing stuff in case of a crash). This leads to creating a lot of duplicates of the same files (or miniscule differences). It only warns when the session/program as a whole is closed, and then you better be sure you saved everything that you closed previously.... Then I realised this:- Even if I open A FRESH instance of Creo, and open NO files, does no changes to any settings or similar and then close down: CREO STILL WARNS about closing the session and loosing unsaved work. This means the warning is just a dummy prompt that has absolutely no clue of if the files have been saved or not. I'm sorry to say this, but HOW ON EARTH can such a high end software be this.... st_pid?!  Even Notepad can detect changes properly....  I've searched for other threads and ideas about this, but n

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0hello. This is Hong Cheol-min, deputy manager of Fuzzy System Technology Department. It is said that G-code is manually created and used for processing on equipment using modeling or drawings created in Creo. 1) Please check if there is an option module that can convert G code or utilize it. 2) Whether or not to automatically update when modeling is modified Reference: Example image related to G code thank you - Hong Chul-min Compensation -------------------------------------------------- Translated the below subject and Description from Korean to English using Google translate on 22.11.2022 at 8:55am IST by vnamboodheri--------------------------------------------------Subject: G코드 변환방법 및 옵션모듈Description: 안녕하세요.퍼지시스템 기술부 홍철민 차장 입니다.Creo에서 생성한 모델링 또는 도면을 활용해서 장비에서 가공을 위해서 G코드를 수동으로 만들어서 사용한다고 합니다.1)G코드 변환이나 활용할수 있는 옵션모듈이 있는지 확인부탁 드립니다.2)모델링 수정시 자동 업데이트 여부참고 : G코드 관련 예시 이미지감사합니다. - 홍철민 배상 -

Hello , I installed CREO PARAMETRIC version 8-0-4-0 but Simulate is not installed as it came in version 6 is there anything I can do?

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0   Use the ProConedataGet function to obtain an alpha angle. This angle has positive and negative values. What is the basis for judging positive or negative?   Translated by Simona Cuciureanu using Google Translate on 5.12.2022 --------------- 使用ProConedataGet函数可以获得一个alpha角度，这个角度有正值也有负值，判断正负的依据是什么

I am using Creo Direct Release 4.0 and DatecodeM040Hello We are using floating licences with a local server.We would like to transfer one licence to a local machine so the user can work at home without network connection.It is a temporary transfer.Could you forward a procedure to do this ?Thanks for your support

Is there a config.pro option for the location of AFX template files? Since we have modified the files, I would like to move them to a 'common' location that can be accessed by multiple builds of Creo. Modelcheck files can be moved to a common location and I would like to do the same with the AFX files. Currently running Creo 7.0.7.0 and 7.0.9.0 and soon 7.0.10.0.

Hi. I have a question from a user who is experiencing slow performance when running Feasibility and Multi-Objective Design Studies. He says he can see that Creo is using very little RAM. There's a lot of info about managing RAM for Simulate, but I'm guessing none of those options affect running BMX design studies? Or will the performance of these be affected by, say, changing the solram settings? I'm guessing not.   Does anyone know of any other settings that may limit RAM usage for Creo? Or perhaps RAM isn't the limiting factor, but rather the processor?

I am using Creo Parametric Release 4.0 and DatecodeM110Creo appearance palette for several segment colors are have to configurate, we tried to set the .dmt file but the location was not fetchable, If any solution for creating the .dmt file and set in library it will be useful for different product as separated segment such like (Product 1 it contains several colors, Product 2 - it contains serval required colors for the specific product etc...)

I am using Creo Parametric Release 7.0 and Datecode7.0.6.0Design Exploration creates .tmu files when you save. Is there a way to convert that file into a .prt file. This would save time once a design is refined.

Hello, I recently opened Creo 7.0 and this orange marked report occured. It said, that I should send this black file to the technical Support, can you help?  -------------------------------------------------The trace creation timestamp is: Fr Nov 25 21:32:51 22The executable build timestamp is: Do Jan 28 16:21:00 21The datecode is: 2020454The pro machine type is: x86e_win64The process ID is: 6580The traceback type is : CRASHThe logger exit status is: 00003The Trail is: trail.txt.11The release is: 7.0The product version is: 7.0.3.0The product title is: Creo Parametric-------------------------------------------------Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 14392. Main Thread 14392=====================0x00007FF978A1C170 NULL (NULL:0) (coretools_sh:0x00007FF978990000) ( 0xfe5aaa30, 0xfe5aab40, 0x4d, 0x3ae03188 )0x00007FF9175962A4 NULL (NULL:0) (uitools_sh:0x00007FF9171D0000) ( 0x3, 0xffffffff, 0x78e4d738, 0x0 )0x00007FF732E97DFE NULL (NULL:0) (xtop:0x00007FF72E

Hello,I had a problem on the server , I had to remove the FlexNet Admin License Server , even more so in C:\Program Files\PTC and in the services too , I need to install it again and I am not succeeding , would there be a way to remove it and install it again , or install over?

I am using Creo Parametric Release 9.0 and Datecode9.0.1.0Hi, when I installed Creo I didn't install the simulation package and I meant to. How can I get the Simulation application installed if i've already installed the program? Thanks!

Our user base has been asked for potential reasons or issues that upgrading may benefit the user productivity. In my opinion, its really difficult to know what is going to help and or hurt users when upgrading, especially when users don't typically know what benefit is in future releases. So, I'm asking for help from the Community for reasons I can give to improve our chances of getting the upgrade process moving. Two reasons I know of currently are potential improvement of datum plane display on drawings and multibody part support which I have yet to see if it might improve our welded structures. What else?

Of the latest M numbers for Creo 4.0, are there any levels that you have found to be more stable/unstable than other?   We are hoping to move to Creo 7.0 later this year.

Hi there, one of my colleagues has an issue with his windchill login in Creo Parametric 8.0.6.0.He has to type in his credentials every time Creo starts. The "remember my password" checkbox seams to be ignored.I found this case https://www.ptc.com/en/support/article/CS257316 , but it was not helpful.Where does chromium store its passwords (maybe that file is corrupted / broken)?Or any other clues?Any help would be appreciated.

I am using Creo Parametric Release 5.0 and Datecode5.0.3.0Please tell us how we can install or activate Render Studio inside Creo Parametric

We're starting to look at using ModelCheck. We have complex CAD assemblies where different engineers own different assemblies and parts. The use case that we're expecting is that an engineer will run ModelCheck on a top level assembly, then share out the results with all the engineers who worked on that design. That way, each engineer could review the list for their parts and address any errors.    I'm trying to find the easiest way for that engineer to run ModelCheck, then pull the results into a spreadsheet. Is there an easy way to do this?   The only path I've found so far is the HTML summary, which can be copy/pasted to a spreadsheet, but then there are steps needed to clean up formatting and filter down to just the parts that have errors. It's not too bad for a one-time event, but it would be difficult to implement across a team doing it frequently.

I am using Creo Parametric Release N/A and DatecodeN/AHi, i have a Creo Design Esential License, and i want to install on a windows 2016 Datacenter, it's possible?Does it only have to be installed on computers Windows 10 64-bit Editions: Windows 10, Pro and Enterprise (1)Windows 8.1 64-bit Editions: Windows 8.1, Pro and Enterprise (2) ???as indicated on your website: https://www.ptc.com/en/products/creo/elements-direct/modeling-express/system-requirementsThank u.

I've installed multiple versions of Creo 3, 6, 9 and on all of them, there is no active part window when opening the program. I'm able to create a new part file but nothing opens on the screen and the only windows that remain open are the startup ones which I can't seem to turn off. Since it's happened on numerous versions, can you recommend some fixes as it's obviously something wrong with my computer?  It has a NVIDIA 940mx 2GB graphics card running Windows 10 on a Intel i7 chip with 16 GB or ram. Didn't know if I need to install a driver or something?  Thank you for your thoughts! 

I am using Creo Parametric Release 2.0 and DatecodeM020Creo 2 crashing while opening drawing files

I am using Creo Parametric Release 3.0 and DatecodeM090License server machine is down or not responding. Cannot launch Creo Parametric. Windchill is performing ok.Here are the errors that I facedLicense request failed for featureRequesting PROE_DesignAdv...7788@US-BOS2-APP4: (-96) License server machine is down or not responding.

I am using Creo Direct Release 5.0 and Datecode5.0.3.0A license has been assigned for a user who will use the Creo suite.We installed the Creo suite without any problem and we assign the user license that is available.When we wanted to start one of the Creo software, the software closes directly with a dialog box saying that the license is wrong or has not been recognized.

I have an older Creo license that we use occasionally for isolated tasks. I had an HDD crash and need to reinstall Creo 3.0 but without an active support account, I cannot download the installation file. Is there any way to get this file without an active support account?