System Administration

I am using Creo Parametric 7.0 7.0.3.0Is there a way to push a matrix (3x51) of xyz points from MathCad to Creo Parametric?

Is there any way to disable, or at minimum override, the sketcher type constraints that effect the placement of balloons?   I am placing roughly 100 bom balloons on a drawing view and am having issues with positioning the balloons were I want, because they insist on snapping normal or tangent, or so on, to features and components.   Is there any way to disable this? In sketcher you could temporarily disable or ignore a constraint if you needed, by right clicking or selecting the constraint and deleting it. That does not work for the constraints that pop up while placing a balloon. I believe all notes behave this way, but placing balloons is where it is causing the most issues as generally things get pretty crowded. The range of the snapping, precision if you will, is very large too, 10 degrees in my case.   I have looked through all of the config and drawing options as well as tried disabling sketcher preferences and adjusting accuracy of the sketcher constraints to

I had my license file on a drive (called D drive) that I formatted last year. When I run setup and select the license file on my C drive it says it's valid and I press finish, but when I run Creo Parametric  it pops up the "License request failed for feature" and below that shows the "Requesting PROE_Essentials" and "D:\...dat (-1) Cannot find license file." So it's not updating the license file location it seems. Where is it storing the license location string? Is there a manual way to update that without uninstalling and reinstalling the whole program? (Not sure if uninstalling would fix this). Creo 5 is installed on C and the license file is on my desktop on C along with the setup files. I have no other drives connected anymore. I read that there was a C:\ProgramData\PTC folder but I don't see any Licensing folder in there. Just a Creo and QualityAgent folder.

When you build a drawing format and use a table from a file, is there any way to tell what that table name was after the fact. You can click on the table number in the model tree and get detailed information about the table formatting, but not the name of the table file that was used to create the table. I have many tables that I have had to create a spreadsheet for to remember what all the table names are that I have used in the various formats and drawing templates. How many others would appreciate the file name of the table being maintained in the properties of the table? I am on Creo 7.0.5.0.

Does anybody know how to define the defaults for Notebooks? I don't seem to be able to find any configuration options that define the drawing settings for them. Mainly I would like to be able to set the default unit of my notebook to mm. Now, even though I open a drawing template the notebook defaults to inches while all my other documents types open in mm.

I am using Creo Parametric 7.0 7.0.6.0Hi: I created a button that displays "hello world" by creating a plugin (using OTK toolkit , C++). I want to be able to test the "press of that button" and capture the contents of the dialog box as part of automated testing. i.e. start Creo in a batch mode (no graphical), simulate the click of the button, extract the results and get out. i.e. I want to be able to "test" the UI functionality added in an automated fashion. Are there examples that show how this can be done ? Ultimately, I want this testing as part of some testing framework before I release my plugin. Can you help ?Thanks

On an assembly drawing I have to show a list of its components. But I need specify names and numbers of the Windchill's parts which the models linked to as OWNER.Windchill adds some parameters to CAD model during upload. So I can see parameters like PTC_WM_CREATED_ON, PTC_WM_REVISION, and so on.I have found these parameters in Windchill 10 > Site/Organization Preference Management > Mapping System Attributes and File PropertiesI can see some extra parameters in the same list which may meet my needs: PTC_WM_PART_NAME, PTC_WM_PART_NUMBER (Description : Identifies the name of the property in the CAD tool that shows the CAD Document's "Owner" associated Part Number. The value may be set to a CAD System Attribute. The default value is PTC_WM_PART_NUMBER.)The problem is that I can not find these parameters (PTC_WM_PART_NAME, PTC_WM_PART_NUMBER) in Creo model. If I try to add parameter with any of these names to Creo model I have the message that this names are reserved.Is this bug? Or

Haithis is brunoSr,Application Engineer,Mind power,PTC-Chanell partner\In pro-E 5 i have used "purge" in command promt to avoid repeted versionsbut i couldn't the same in Creo-2.0My question is,why the Software creating old versions,hence its occupies and create unwanted filesor is there any intention beyond this concept,,,,,1.how can i control systematically to delete or avoid this old versions or repeted versions,,2.Explain the procedure "purge" in Creo-2.0 Parametric........This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I am using Creo Parametric 7.0 7.0.0.0Hello, is it possible to install both Creo7 *and* Creo4 on same machine?

Having read: https://community.ptc.com/t5/System-Administration/Creo-4-mapkeys/m-p/560196 https://community.ptc.com/t5/System-Administration/Mapkey-Writing-Editing-Tips/td-p/443729   I have a question about the numerical sequence in the part of the mapkey shown below. Is this using the Tom showed to type in a word?   mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9 930 614 5898362 1536 1421 848 1920 1080 \mapkey(continued) 1443299 `Z`;%zzss;

I can not find the config setting to turn on Dual Dimensions in Creo Paremetric. Does any one no where they moved it?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

We are trying to automate a process that can gut the internal components of our product and create a step file for marketing and external vendors. Questions: What does your company use? Can this be done via Windchill and the cadworker? What are some lessons-learned and tips/tricks you have found? If you are using some third party tool, what is it? Thanks!

I am using Creo Parametric 3.0 M080테스트를 위하여 Creo Parametric 3.0 m080을 다운로드 해야하는데, 현재 m190만 다운로드가 가능합니다. m080 설치파일을 다운로드 받을 수 있을까요? 부탁을 드리겠습니다. 감사합니다.   I need to download Creo Parametric 3.0 m080 for testing, but currently only m190 is available for download. Can I download the m080 installation file? I'd like to ask you a favor. thank you. Translated with Google Translate Translated by Simona Cuciureanu, Dec 6th 2021

I am using Creo Parametric 7.0 7.0.6.0After Successful installation in my machine I cannot open Creo Parametric 7.0Here are the errors that I facedThis App Can't run in your PCTo find a version for your PC, Check with software publisher

As per the original thread Does anyone know if it's possible to trim down NOTE mapkeys?  I'm not seeing the same format as say, a table input, so the option to cut every thing down using input / table_input doesn't seem applicable.  Thanks! Syntax for the NOTE that Creo recorded is below: mapkey(continued) ~ Activate `main_dlg_cur` `page_Annotate_control_btn` 1;\mapkey(continued) ~ Command `ProCmdDtlInsFreeNote` ;@PAUSE_FOR_SCREEN_PICK;\ mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9 183 -13 4259905 1536 2965 1134 1920 1080 \mapkey(continued) 192499 `A`;\mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9 183 -13 5439571 1536 2965 1134 1920 1080 \mapkey(continued) 192499 `S`;\mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9 183 -13 5439571 1536 2965 1134 1920 1080 \mapkey(continued) 192499 `S`;\mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9 183 -13 4522053 1536 2965 1134 1920 1080 \mapkey(continued) 192499 `E`;\mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9

I am using Creo Parametric 7.0 7.0.5.0Are creo 7 and Creo view 7.0 supported on Mac OS ? .. Is windchill supported on safari browser?

I am using Creo Parametric 8.0 8.0.2.0Dear sir,I have purchased the ISDX Ext License of my new company name is ( RIDDHI SIDDHI HOME DECOR PRIVATE LIMITED )and my old license is Creo design advance license of my old company name (Riddhi Siddhi Design ) I am requesting you please change my Creo design advance license to the new company name ( RIDDHI SIDDHI HOME DECOR PRIVATE LIMITED ). and attached both shipment old & new please check it. then we create a license Creo design advance +ISDX.Here are the errors that I facedNO

Hello All,   We have a PTC service contract where we can upgrade to the latest Creo version.  We were quite behind on this so we jumped from Creo 3.0 to 6.0.  One thing that we have noticed is that we lost access to the Merge/Inheritance feature when we moved to Creo 6.0.  I am not our administrator and that person recently left the company.  My understanding is that the Merge/Inheritance feature is only available with the Creo Design Advanced license tier.  We are running Creo Design Essentials (T1).    If we had Merge/Inheritance with Creo 3 under the same license contract, why did it go away when we moved to Creo 6.0.  Did the creo package tiers exist with Creo 3.0?  Did our company drop our tier level down on the last license renewal?

creo 4.0 unresponsive   we are using creo 4.0 m100.   but don't to Creo4.0.is unreponsive since suddenly yesterday, Reconfigure too   try to disable config.pro after  creo still too not action   I don't know cause   using the  Window 10            

We are considering migrating the following files from a network drive to a Windchill folder, but would first like to hear what the pros and cons of doing so.  Obviously a pro of having in Windchill is back up and revision/state control.  However what else have you found? .mtl Material files (pro_material_dir) .sym Symbol files (pro_symbol_dir)   Currently, from the network drives, if either one of these file types are modified, and the Creo model opened again, neither will look at the new file as they are both saved with the model only and loose their connection to the original file.  Does it work differently when using Windchill?  Have you found any config options to help control this or for these files to work better using Windchill vs Network folders?

Will Creo 8 run with LM version 11.14.1.2?We are in the process of upgrading servers, to be able to run newest Flexnet, but will Creo 8 features work with older LM?In all documents I can found it says 11.17.1.0 is recommended, but I cant found information will it run with 11.14.1.2

PTC is committed to improving your online experience. To get it right, we need your help. Please take 5 minutes to share your thoughts. Your response helps PTC gain valuable insights on how to make the PTC support website more effective. Take the survey > Survey end Monday, November 15, 2021. We greatly appreciate your participation!Nalie Lee-Heidt

I am using Creo Parametric 8.0 8.0.0.0   creo8.0 cannot be installed, an error occurred during the installation process, showing that the file cannot be reached;   Here are the errors that I faced File unreachable   Translated with Google Translate Translated by Hedy Jin, Nov 8th, 2021 --------------------------------------------------------------- I am using Creo Parametric 8.0 8.0.0.0creo8.0无法安装，安装过程中出错，显示文件无法到达；   Here are the errors that I faced文件无法到达

As per this thread - same issue Just logged in to ask this same question. Seems ridiculous I have to manually reorder the points, getting very good at Cut & Paste to do it though. Also frustrating that if I have a table established, and have added extra columns of data, and I add one point, CREO reorders the entire table, but not my manually added columns. 

With modelcheck, we can easily add parameters and relations to pass mass properties to Windchill. For instance   PRT_PARAMETER MASS REAL PRT_PARAMETER MASS NONE EQ PDM PRT_RELATION MASS=PRO_MP_MASS   The problem is that WindChill is being configured with units (as it should be). If a part does NOT have their relations set to be unit sensitive, the parameter generated will not have a unit. When you try to check-in this model, the Windchill page will have an error. How can we avoid this while trying to keep to the same approach?  Most of our legacy files do not have relations set to be unit sensitive. Even newer models can have the sensitivity turned off. Is there a config that forces this on?  Thoughts?       Thanks!   @Mahesh_Sharma